Skip to main content

Joe Roy-Mayhew

We describe a scalable method for producing continuous graphene networks by tape casting surfactant-stabilized aqueous suspensions of functionalized graphene sheets. Similar to all other highly connected graphene-containing networks, the... more
We describe a scalable method for producing continuous graphene networks by tape
casting surfactant-stabilized aqueous suspensions of functionalized graphene sheets. Similar to all other highly connected graphene-containing networks, the degree of overlap between the sheets controls the tapes' electrical and mechanical properties. However, unlike other graphene-containing networks, the specific surface area of the cast tapes remains high (>400 m2 3 g1). Exhibiting apparent densities between 0.15 and 0.51 g 3 cm3, with electrical conductivities up to 24 kS 3 m1 and tensile strengths over 10 MPa, these tapes exhibit the best combination of properties with respect to density heretofore observed for carbon-based papers, membranes, or films.
When applied on the counter electrode of a dye-sensitized solar cell, functionalized graphene sheets with oxygen-containing sites perform comparably to platinum (conversion efficiencies of 5.0 and 5.5%, respectively, at 100 mW cm2 AM1.5G... more
When applied on the counter electrode of a dye-sensitized solar cell, functionalized graphene sheets with oxygen-containing sites perform comparably to platinum (conversion efficiencies of 5.0 and 5.5%, respectively, at 100 mW cm2 AM1.5G simulated light). To interpret the catalytic activity of functionalized graphene sheets toward the reduction of triiodide, we propose a new electrochemical impedance spectroscopy equivalent circuit that matches the observed spectra features to the appropriate phenomena. Using cyclic voltammetry, we also show that tuning our material by increasing the amount of oxygen-containing functional groups can improve its apparent catalytic activity. Furthermore, we demonstrate that a functionalized graphene sheet based ink can serve as a catalytic, flexible, electrically conductive counter electrode material.
A synthetic pathway has been constructed for the production of glucuronic and glucaric acids from glucose in Escherichia coli. Coexpression of the genes encoding myo-inositol-1-phosphate synthase (Ino1) from Saccharomyces cerevisiae and... more
A synthetic pathway has been constructed for the production of glucuronic and glucaric acids from glucose in Escherichia coli. Coexpression of the genes encoding myo-inositol-1-phosphate synthase (Ino1) from Saccharomyces cerevisiae and myo-inositol oxygenase (MIOX) from mice led to production of glucuronic acid through the intermediate myo-inositol. Glucuronic acid concentrations up to 0.3 g/liter were measured in the culture broth. The activity of MIOX was rate limiting, resulting in the accumulation of both myo-inositol and glucuronic acid as final products, in approximately equal concentrations. Inclusion of a third enzyme, uronate dehydrogenase (Udh) from Pseudomonas syringae, facilitated the conversion of glucuronic acid to glucaric acid. The activity of this recombinant enzyme was more than 2 orders of magnitude higher than that of Ino1 and MIOX and increased overall flux through the pathway such that glucaric acid concentrations in excess of 1 g/liter were observed. This represents a novel microbial system for the biological production of glucaric acid, a "top value-added chemical" from biomass.