Claims (1)
KAISERLICHESIMPERIAL
PATENTAMT.PATENT OFFICE.
In der Zeichnung ist ein kontinuierliches Torfentwässerungsrührwerk dargestellt, in
welchem mittels Wärme, Vakuum und Elektrizität Torf erwärmt, entwässert und gemischt
werden soll. Es ist die Absicht, jede Krustenbildung durch die fortwährende Bewegung
des Torfes auszuschließen und durch das Durchsaugen von Wärme eine schnelle
Entwässerung herbeizuführen bei geringemIn the drawing, a continuous peat drainage agitator is shown, in
which uses heat, vacuum and electricity to heat, drain and mix peat
shall be. The intention is to prevent any crust formation from ongoing movement
exclude the peat and by sucking in heat a quick
Induce drainage at low levels
ίο Kraftverbrauch und wenig Flächenraum.ίο Power consumption and little space.
Fig. ι stellt das Entwässerungsrührwerk dar; α ist der Außenmantel, b Raum, in welchem
mittels Luftpumpe Vakuum gehalten und die durch den Torf hindurchgekommene, erkaltete Luft und das- mitgerissene Wasser
abgesaugt wird; c ist ein Korb aus Eisendrahtstäben, welche in bestimmten Abständen
angeordnet sind, um Zwischenräume zu erhalten, durch welche Luft und Wasser abgesaugt
werden können und an welchen der negative Pol angeschaltet wird. Innerhalb des Stabkorbes befindet sich ein Filtertuch,
durch welches ein Absaugen von Torfteilen verhindert wird; f ist der Raum zur Aufnähme
des Torfes, in welchen das Rührwerk g mit der Hohlwelle h eingesetzt ist.
Die Rührarme g sind mit der Hohlwelle h fest verbunden, die Rührarme g sind hohl,
auf ihren inneren Flächen k perforiert hergestellt und diese Hohlräume stehen mit dem
Hohlraum der Welle h, an die der positive Pol angeschaltet ist, in Verbindung. Durch
sie wird bei i warme Luft zugeführt. /' und /2
sind die beiden Abschließungsflächen des ganzen Hohlraumes, an welchen α und c befestigt
werden und in denen die Hohlwelle h gelagert wird. Durch Z1 erfolgt die Zuführung des Torfes im nassen Zustande. In
Γ2 ist ein Kanal angeordnet, um ein fortwährendes Entweichen des entwässerten Torfes
zu ermöglichen, in der Weise, daß der Kanal beliebig vergrößert oder verkleinert werden
kann und eine Regelung des abgehenden Torfes möglich ist, . so daß die genügende
Menge entwässerten Torfes entweichen kann.Fig. Ι shows the dewatering agitator; α is the outer jacket, b space, in which a vacuum is maintained by means of an air pump and the cooled air that has passed through the peat and the water that has been entrained are sucked off; c is a basket made of iron wire rods which are arranged at certain intervals in order to obtain spaces through which air and water can be sucked off and to which the negative pole is connected. Inside the rod basket there is a filter cloth, which prevents peat parts from being sucked away; f is the space for receiving the peat, in which the agitator g with the hollow shaft h is used. The agitator arms g are firmly connected to the hollow shaft h , the agitator arms g are hollow, made perforated on their inner surfaces k and these cavities are connected to the cavity of the shaft h to which the positive pole is connected. Warm air is supplied through them at i. / 'and / 2 are the two closing surfaces of the entire cavity, to which α and c are attached and in which the hollow shaft h is supported. Through Z 1 , the peat is supplied in the wet state. In Γ 2 a channel is arranged to allow the drained peat to continuously escape, in such a way that the channel can be enlarged or reduced as desired and the outgoing peat can be regulated,. so that the sufficient amount of drained peat can escape.
In Fig. 2 (Schnitt nach A-B) ist der Kanal m ersichtlich, und Fig. 3 stellt einen Rührwerksteil
dar.In Fig. 2 (section to AB) the channel m can be seen, and Fig. 3 shows an agitator part.