sprei zf aß einlage aus Leder
: Wie das Modell zeigte ist die Spreitfußeinlage eine
Durchaussohle, welche wie folgt zusammengestellt ist.
Es stellt dar :
l. Obersohle
2. Untersohle mit Einsteekschlitze
3. Spreizfußstutze (Gummi-Pelotte)
4. Gummi-Einlage
5. DeekLase
6. Fersenbett
Die Obersohle (1) ist mit der Dhtersohle (2) zusammenge-
nähte während die Decklasche (5) an der Untersohle (2)
befestigt ist. Durch eine Filzeinlage zwischen Ober-und
Diese Spreizfußeinlage hat gegenüber den gebräuchlichen
halben Einlagen den Vorteils dass sie sich im Schuh nicht
verschiebt. Die herzförmige GuBmi-Pelotte (3) wird in dem
ersten oder zweiten Schlitz eingeschoben und kann also
nach Bedarf reguliert und ausgewechselt werden. Das
Fersenbett (6) ist für die Fersenwölbung vorgesehen. Für
besonders empfindliche Fuße bzw. Fußballen, kann zwischen
Untersohle und Decklasche eine dünne Gummi-Einlage (4)
aus Scha. u. mgùmi odr âg. eingelegt werden.
Diese Spreitifußeinlage ist so gearbeitet, dass sie im
Schuh nicht mehr als eine gewöhnliche Einlegesohle auf-
trägt und auch dem Fuß im Schuh nicht viel Platz weg nimmt.
Wichtig ist, dass die Pelotte (3) Gummistütze) richtig
angelegt bzw. eingeschoben wird, sodass das Quergewolbe
kurz hinter dem Mittelknochen anhebt. Wirkt die Stützung
an dieser Stelle ein, so sind die Mittelfußköpfchen ent-
lastet und haben keine Bodenberührung mehr mit dem Fuß-
boden, womit auch die Ursache der Schmerzen im vorderen
Fuß behoben ist.
sprei zf ate insert made of leather
: As the model showed, the spreading foot insert is a
Through sole, which is put together as follows.
It shows :
l. Upper sole
2. Undersole with one-in-one slits
3. splayfoot support (rubber pad)
4. Rubber insert
5. DeekLase
6. Heel bed
The upper sole (1) is combined with the inner sole (2)
sewed while the top flap (5) on the bottom (2)
is attached. With a felt insert between the top and bottom
This splayfoot insert has compared to the usual
half insoles have the advantage that they are not in the shoe
shifts. The heart-shaped GuBmi pad (3) is in the
first or second slot inserted and so can
can be adjusted and replaced as required. That
The heel bed (6) is intended for the arching of the heel. For
particularly sensitive feet or balls of the feet, can be between
A thin rubber insert on the bottom and top flap (4)
from Scha. u. mgùmi odr âg. be inserted.
This spreading foot insert is made in such a way that it can be used in
Shoe no more than an ordinary insole
and does not take up much space in the shoe.
It is important that the pad (3) rubber support) is correct
is applied or pushed in, so that the transverse arch
lifts just behind the middle bone. The support works
at this point, the metatarsal heads are
and have no more ground contact with the foot
floor, which is also the cause of the pain in the front
Foot is fixed.