Verfahren zur Darstellung eines Gerbmittels. Es wurde gefunden, dass man -einen Stoff von ausgezeichneter Gerbwirkung erhält, wenn man das Einwirkungsprodukt von kon zentrierter Schwefelsäure auf ein Gemisch der drei isomieren Kresole mit Harnstoff,
Gallussäure und Formaldehyd bei erhöhter Temperatur zur Reaktion bringt und das Re- aktions.produkt anneutralisiert, um,die über schüssige freie Schwefelsäure abzustumpfen. Die Reaktion der fertigen Gerblösung ist deutlich kongosauer.
Der neue Gerbstoff gerbt in Form seiner löslichen Salze in schwach saurer Lösung die tierische Blösse zu einem weichen Leder von rein weisser Farbe und einer Fülle, wie man sie sonst nur durch Anwendung vegetabili scher Gerbstoffe erreicht. Er zeigt die all gemeinen Reaktionen gerbender Stoffe wie Leimfällung, Fällüng basischer Farbstoffe., und gibt mit Eisenchlorid einen blauen Nie derschlag; Seide wird von ihm mit beträcht licher Gewichtsvermehrung beschwert. Auch zur Kombinationsgerbung in Mi schung mit andern gerbenden oder nicht ger benden Stoffen kann der neue Gerbstoff vor teilhaft Verwendung finden.
Man kann das Verfahren auch ausüben mit einem Formaldehyd, welcher bei der Re aktion aus einem formaldehy.dabgeben.den Stoff wie Methylal abgespalten wurde, sowie mit einem Harnstoff, welcher aus einer harn stoffbildenden .Stoff wie Calciumcyanamid bei der Reaktion erhalten wurde.
Die Arbeitsweise wird an folgendem Bei spiel erläutert: <I>Beispiel:</I> 20.0 Teile eines Gemisches der drei iso- meren Kresole und 200 Teile Schwefelsäure 66 B6 werden 10 Minuten auf 105 C er hitzt, alsdann mit 100 Teilen Wasser ver setzt und auf<B>50'</B> C abgekühlt. Hierauf werden 50 Teile Gallussäure und 50 Teile Harnstoff zugemischt und hernach zwischen 50 bis<B>70'</B> C unter gutem Rühren 140 Teile Formaldehyd 30% (Gewicht) langsam zuge geben, wobei zuletzt noch 5 bis 10 Minuten auf<B>80'</B> C erhitzt wird.
Zum Schluss neu tralisiert man mit Natronlauge auf eine tech nisch brauchbare Acidität an.
Process for the preparation of a tanning agent. It has been found that -a substance with excellent tanning properties is obtained if one uses the product of the action of concentrated sulfuric acid on a mixture of the three isomized cresols with urea,
Brings gallic acid and formaldehyde to reaction at an elevated temperature and neutralizes the reaction product in order to blunt the excess free sulfuric acid. The reaction of the finished tanning solution is clearly Congo acidic.
The new tanning agent, in the form of its soluble salts in a weakly acidic solution, tans the animal pelt into a soft leather of pure white color and a fullness that can otherwise only be achieved by using vegetable tanning agents. It shows the general reactions of tanning substances such as glue precipitation, precipitation of basic dyes., And gives a blue precipitate with iron chloride; It weighs down silk with a considerable increase in weight. The new tanning agent can also be used advantageously for combination tanning mixed with other tanning or non-tanning substances.
The method can also be carried out with a formaldehyde, which was split off from a formaldehyde-giving substance such as methylal during the reaction, and with a urea which was obtained from a urea-forming substance such as calcium cyanamide during the reaction.
The procedure is explained using the following example: <I> Example: </I> 20.0 parts of a mixture of the three isomeric cresols and 200 parts of sulfuric acid 66 B6 are heated to 105 ° C. for 10 minutes, then 100 parts of water are added and cooled to <B> 50 '</B> C. 50 parts of gallic acid and 50 parts of urea are then mixed in and 140 parts of 30% (weight) formaldehyde are then slowly added at between 50 to 70 ° C with thorough stirring, with a further 5 to 10 minutes at last > 80 'C is heated.
Finally, it is neutralized with caustic soda to a technically usable acidity.