Skip to main content

Ufuk Killi

The aim of the coating process is to improve whiteness, brightness, opacity, surface smoothness and water resistance of paper and board. In this study, the effects of PCC and GCC on the physical and optical properties of coated papers... more
The aim of the coating process is to improve whiteness, brightness, opacity, surface smoothness and water resistance of paper and board. In this study, the effects of PCC and GCC on the physical and optical properties of coated papers were investigated. Writing and printing papers were produced with using bleached short (70%) and long (30%) fiber mixtures. Calcium carbonate (86.7%), starch (15%) and carboxymethyl cellulose (0.3) were used as coating materials. Precipitated (PCC) and ground (GCC) calcium carbonates were adjusted to 50% concentration with tap water. Coating suspensions were prepared with PCC and GCC mixtures and applied to paper surfaces with coating rod (no:2). The coated papers were dried at room condition and calendered under 15 bar pressure at 100˚C. The physical and optical properties of the coated papers were investigated and compared with each other. The results show that using PCC as coating material increased the optical properties of the papers and gave better results than GCC. The breaking length was found to be higher with using GCC. In terms of surface roughness, there were differences between of GCC and PCC coated papers. As a result, the use of PCC instead of GCC as a coating material has been found to improve the optical properties and the surface roughness of paper. The improvement of optical properties is costly for papermakers and this problem can be solved with using PCC as a coating materials.
Özet Test liner kağıtları genellikle atık kağıtların geri dönüşümü ile elde edilen ve ambalaj kartonu üretiminde iç ve dış yüzeyde kullanılan bir kağıt türüdür. Genel olarak oluklu mukavvanın (ambalaj kartonu) dış ve iç yüzeyinde... more
Özet Test liner kağıtları genellikle atık kağıtların geri dönüşümü ile elde edilen ve ambalaj kartonu üretiminde iç ve dış yüzeyde kullanılan bir kağıt türüdür. Genel olarak oluklu mukavvanın (ambalaj kartonu) dış ve iç yüzeyinde kullanılan test liner kağıtların suya ve rutubete karşı direncinin ve fiziksel özelliklerinin iyi olması istenmektedir. Bu çalışmada, reçine içeriği zengin olan ve Ülkemizde yetişen Sahil çamından elde edilen kolofanın test liner kağıdı üretiminde kullanılarak kağıt özellikleri üzerine etkisinin belirlenmesi amaçlanmıştır. Test liner üretimi esnasında sahil çamı kolofanı hem bünyeden (%3, %6 ve %9 oranında) hem de yüzeyden 3 nolu rod ile (%5, %10 ve %15 konsantrasyonunda) ayrı ayrı uygulanmış ve sektörde yaygın olarak kullanılan ticari reçine Topsize RD44 ile karşılaştırması yapılmıştır. Yapılan bu çalışma sonucunda, yüzey tutkallama da doğal reçine fiziksel özellikleri ve suya karşı direnci arttırırken, optik özellikleri düşürmüştür. İç tutkallama da ise optik ve fiziksel özellikleri iyileştirirken, suya karşı direnç özellikleri açısından ticari reçinenin (Topsize RD44) oldukça etkili olduğu tespit edilmiştir. Abstract Test liner papers are usually a type of paper that is obtained by recycling waste papers and used on the inner and outer surfaces in the production of packing boxes. In general, it is desirable that the test liner papers used on both surfaces of the corrugated cardboard (packing box) are resistant to water and moisture and have better physical properties. In this study, it was aimed to determine the effects of the colophony (natural rosin) obtained from the maritime pine grown in our country on test liner paper properties. Rosin was applied separately in pulp preparation unit (internal sizing; 3%, 6% and 9%) and at size press (external sizing with 3rd rod; 5%, 10% and 15% concentration) during test liner paper production and compared to Topsize RD44, commercial rosin widely used in the sector.
Özet Kuşeleme işlemi genel olarak kağıt ve kartonların optik ve yüzey özelliklerini geliştirmek için yapılmaktadır. Kağıdın optik özelliklerindeki yükselişler baskı kalitesinde iyileşmeleri sağlamaktadır. Bu çalışmada, kuşe karton üretimi... more
Özet Kuşeleme işlemi genel olarak kağıt ve kartonların optik ve yüzey özelliklerini geliştirmek için yapılmaktadır. Kağıdın optik özelliklerindeki yükselişler baskı kalitesinde iyileşmeleri sağlamaktadır. Bu çalışmada, kuşe karton üretimi için uzun ve kısa lif harmanları kullanılarak 160-170 gramajlarında kartonlar üretilmiştir. Kuşeleme işleminde kuşe pigmenti olarak PCC ve GCC kullanılmış olup nişasta ve karboksimetil selüloz kullanılarak kuşe harçları hazırlanmıştır. Kuşe harçları karton yüzeyine 2 numaralı rod yardımı ile uygulanmıştır. Belirli oranlarda PCC ve GCC kullanılarak üretilen kuşe kartonlar fiziksel ve optik testlere tabi tutulmuştur. Elde edilen sonuçlara göre, kuşe karton üretiminde kuşe pigmenti olarak PCC ve GCC kullanıldığında beyazlık ve parlaklık değerleri sırasıyla %3.91 ve %4.70 oranına kadar artış göstermiştir. Fiziksel özelliklerde ise belirgin azalmalar meydana gelmiştir. PCC ve GCC kendi aralarında karşılaştırıldığında PCC ile kuşelenen kartonların yüzey pürüzlülüğü GCC'ye göre daha iyi çıkmıştır. Aynı zamanda kuşe harcındaki PCC oranındaki artışa paralel olarak kuşe kartonların optik özelliklerinde artışların olduğu tespit edilmiştir. Kuşe kartonların kuşelenme işleminde kuşe pigmenti olarak PCC'nin kullanılması hem yüzey düzgünlüğü hem de baskı kalitesi açısında GCC'ye göre daha iyi sonuçlar vermiştir. Anahtar Kelimeler: Kuşe karton, PCC, GCC
The aim of the coating process is to improve whiteness, brightness, opacity, surface smoothness and water resistance of paper and board. In this study, the effects of PCC and GCC on the physical and optical properties of coated papers... more
The aim of the coating process is to improve whiteness, brightness, opacity, surface smoothness and water resistance of paper and board. In this study, the effects of PCC and GCC on the physical and optical properties of coated papers were investigated. Writing and printing papers were produced with using bleached short (70%) and long (30%) fiber mixtures. Calcium carbonate (86.7%), starch (15%) and carboxymethyl cellulose (0.3) were used as coating materials. Precipitated (PCC) and ground (GCC) calcium carbonates were adjusted to 50% concentration with tap water. Coating suspensions were prepared with PCC and GCC mixtures and applied to paper surfaces with coating rod (no:2). The coated papers were dried at room condition and calendered under 15 bar pressure at 100˚C. The physical and optical properties of the coated papers were investigated and compared with each other. The results show that using PCC as coating material increased the optical properties of the papers and gave better results than GCC. The breaking length was found to be higher with using GCC. In terms of surface roughness, there were differences between of GCC and PCC coated papers. As a result, the use of PCC instead of GCC as a coating material has been found to improve the optical properties and the surface roughness of paper. The improvement of optical properties is costly for papermakers and this problem can be solved with using PCC as a coating materials.