Abstract
Shotcrete is a key initial rock support component used in underground mining and civil projects. The strength of shotcrete plays a vital role in providing and deciding the support adequacy. The strength of shotcrete is evaluated by its uniaxial compressive strength (UCS) test that is usually conducted on extracted core samples. Shotcrete cores are commonly extracted from the test panels along the direction of its application; thus, its strength perpendicular to the direction of application is often neglected. The true bearing strength of shotcrete is thereby ignored despite the fact that higher stresses act normal to the direction of its application. Although the anisotropic behavior of shotcrete is well reported, no study has reported extensive testing of this scale and nature. This study reports extensive testing of shotcrete cores extracted from tunnels of a mega hydroelectric project in Pakistan. The study reports 7- and 28-days strength tests of shotcrete cores. The research also investigates the anisotropic behavior of steel fiber reinforced shotcrete and suggests that shotcrete exhibits higher strength perpendicular to the direction of its application.
Similar content being viewed by others
References
A820M-16 AA (2016) Standard specification for steel fibers for fiber-reinforced concrete. ASTM International, West Conshohocken, PA, www.astm.orghttps://doi.org/10.1520/A0820_A0820M-16
ACI-Committee (1994) Guide for the Evaluation of Shotcrete (ACI 506.4R-94) American Concrete Institute, Farmington Hills, MI
Aire C, Aguilar L (2021) Ensayos de control del concreto lanzado con fibras en el túnel de la línea 12 del metro de la CDMX. Revista ALCONPAT 11, no. 1 pp 73–87. https://revistaalconpat.org/index.php/RA/article/download/493/884
Babaie R, Abolfazli M, Fahimifar A (2019) Mechanical properties of steel and polymer fiber reinforced concrete. J Mech Behav Mater 28:119–134. https://doi.org/10.1515/jmbm-2019-0014
Bamonte P, Gambarova PG, Nafarieh A (2012) Hot and residual behavior of steel fiber-reinforced structural shotcrete exposed to high temperature. In high performance fiber reinforced cement composites 6. Springer, Dordrecht, pp 179–186. https://doi.org/10.1007/978-94-007-2436-5-22
Bernard ES (2009) Early-age re-entry under fresh fibre reinforced shotcrete. In: Knut F Garshol BCC, LLF, USA (ed) Shotcrete for underground support XI, ECI symposium series, Felix Amberg, SIA, Switzerland
Bernardo G, Guida A, Mecca I (2015) Advancements in shotcrete technology. WIT Transactions on The Built Environment 153:591–602. https://www.witpress.com/Secure/elibrary/papers/STR15/STR15049FU1.pdf
Boldini D, Lackner R, Mang Herbert A (2005) Ground-shotcrete interaction of natm tunnels with high overburden. J Geotech Geoenviron Eng 131:886–897. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:7(886)
Bryne LE, Ansell A, Holmgren J (2014) Laboratory testing of early age bond strength of shotcrete on hard rock. Tunnel Underground Space Technol 41:113–119. https://doi.org/10.1016/j.tust.2013.12.002
C42M-20 AC (2020) Standard test method for obtaining and testing drilled cores and sawed beams of concrete. ASTM International, West Conshohocken, PA, www.astm.orghttps://doi.org/10.1520/C0042_C0042M-20
C617M-15 AC (2015) Standard practice for capping cylindrical concrete specimens. ASTM International, West Conshohocken, www.astm.orghttps://doi.org/10.1520/C0617_C0617M-15
Celestino TB, Bortolucci AA, Re G, Ferreira A (2001) Diametral compression tests for determination of shotcrete anisotropic elastic constants. In: Shotcrete for Underground Support VIII. ASCE, pp 27–35
Celestino TB, de Castro GR, Vessaro P, Bortolucci AA, Santos OJ (2006) Strength and deformability anisotropy of fiber-reinforced shotcrete. In: Shotcrete for underground support X. pp 150–157. https://doi.org/10.1061/40885(215)13
De Belie N, Grosse CU, Kurz J, Reinhardt HW (2005) Ultrasound monitoring of the influence of different accelerating admixtures and cement types for shotcrete on setting and hardening behaviour. Cement Concrete Res 35:2087–2094. https://doi.org/10.1016/j.cemconres.2005.03.011
Fukui K, Okubo S, Yang Q, Ochi T (1996) Mechanical properties of steel fiber reinforced shotcrete in uniaxial tension. Journal-Mining and Materials Processing Institute of Japan 112:69–74. https://doi.org/10.2473/shigentosozai.112.69
Galan I, Baldermann A, Kusterle W, Dietzel M, Mittermayr F (2019) Durability of shotcrete for underground support– Review and update. Construct Build Mater 202:465–493. https://doi.org/10.1016/j.conbuildmat.2018.12.151
Galan I, Briendl L, Thumann M, Steindl F, Röck R, Kusterle W, Mittermayr F (2019) Filler effect in shotcrete. Materials. https://doi.org/10.3390/ma12193221
Ginouse N, Reny S, Jolin M (2015) Engineered fiber reinforced shotcrete for efficient and fast ground support installation. In: Shotcrete for underground support XII proceedings. https://dc.engconfintl.org/shotcrete_xii/16
Harrison JP, Hudson JA (2000) Engineering rock mechanics: questions 16.1–16.10: rock rein-forcement and rock support. In: Engineering rock mechanics part II. Pergamon, Oxford
Hubáček A, Brožovský J, Hela R (2013) Comparison of properties of shotcrete tested using destructive and non-destructive methods. Procedia Eng 65:63–68. https://doi.org/10.1016/j.proeng.2013.09.012
Hubacek A, Hela R, Helan T (2012) Research of properties of Sprayed Concrete prepared in Laboratory. 19th Concrete days. Czech Republic, Hradec Kralove, pp 575–579
Jiabin W, Ditao N, Zhanping S (2016) Damage layer thickness and formation mechanism of shotcrete with and without steel fiber under sulfate corrosion of dry–wet cycles by ultrasound plane testing method. Construct Build Materials 123:346–356. https://doi.org/10.1016/j.conbuildmat.2016.06.146
Keyter GJ, Drescher K (2001) Test results on compressive strength anisotropy in steel fibre reinforced shotcrete. J South Afr Inst Min Metall 101:183–187. https://doi.org/10.10520/AJA0038223X_2669
Lemay JD, Jolin M, Gagné R (2014) Ultra rapid strength development in dry-mix shotcrete for ultra rapid support in challenging mining conditions. In: deep mining 2014: proceedings of the seventh international conference on deep and high stress mining. Australian Centre for Geomechanics, pp 271–279. https://papers.acg.uwa.edu.au/p/1410_17_Lemay/
Leung CKY, Lai R, Lee AYF (2005) Properties of wet-mixed fiber reinforced shotcrete and fiber reinforced concrete with similar composition. Cement Concrete Res 35:788–795. https://doi.org/10.1016/j.cemconres.2004.05.033
Martin LA, Clark CC, Seymour JB, Stepan MA (2015) Shotcrete design and installation compliance testing: early strength, load capacity, toughness, adhesion strength, and applied quality centers for disease control and prevention. National Institute for Occupational Safety and Health, Spokane, WA
Pappas DM, Barton TM, Eric SW (2003) The long-term performance of surface support liners for ground control in a underground limestone mine. In: 3rd International seminar on surface support liners: thin spray-on liners, shotcrete and mesh, Quebec City, Canada. (Sect. 22). https://d1wqtxts1xzle7.cloudfront.net/76847111/tltpo-libre.pdf?1639936133=&response-contentdisposition=inline%3B+filename%3DThe_Long_Term_Performance_of_Surface_Sup.pdf&Expires=1671650058&Signature=KMTh0HaZbCx3cl3vpCTutoLDDXKUfzK-8P3eMUF7x0olGf59KJ0~xIp66zHs5JzzVse5vh08puyBUslP3KwtRG8RgkvtX~pPv~3sxoJ4xXy7JHNRw4SRBC7JCt4aY03bG1KYvC8XJIkVI93q7WvoAzgpRaNCNQKcanCwM~wHdguaywfcYH1YosK1Hl5fWRDZmTxi-2AXEOl2DjEMwD8zbWelHCNcey-aNE6RaOQL2e8mLH4frpOy5DkXnggNqmpUBDHvZgtvt25bpv86KlzvvoHELW6Xul0Y7AlApAd4C7gWhwzFYHzkuMf9jsmtBKDB2803RFUcyc0zIxqKIY42g__&Key-Pair-Id=APKAJLOHF5GGSLRBV4ZA
Reny S, Ginouse N (2014) Development of a rapid strength gain dry-mix shotcrete using calcium sulfo-aluminate cement for mining and tunnelling applications. In: deep mining 2014: Proceedings of the Seventh International Conference on Deep and High Stress Mining. Australian Centre for Geomechanics, pp 281–290
Yan X, Liu L-m, Zhang J-p, Li Y-h, Wang H (2018) Experimental study on basic mechanical properties of steel fiber-reinforced siliceous wet shotcrete. Adv Mater Sci Eng 2018:1637261. https://doi.org/10.1155/2018/1637261
Yu H, Wu L, Liu WV, Pourrahimian Y (2018) Effects of fibers on expansive shotcrete mixtures consisting of calcium sulfoaluminate cement, ordinary Portland cement, and calcium sulfate. J Rock Mechan Geotechn Eng 10:212–221. https://doi.org/10.1016/j.jrmge.2017.12.001
Yun K-K, Choi S, Ha T, Kim SK, Hossain MS, Han S (2021) Long-term compressive strength development of steel fiber shotcrete from cores based on accelerator types at tunnel site. Materials (Basel) 14:580. https://doi.org/10.3390/ma14030580
Zhang Y, Zhuang X, Lackner R (2018) Stability analysis of shotcrete supported crown of NATM tunnels with discontinuity layout optimization. Int J Numer Analyt Methods Geomechan 42:1199–1216. https://doi.org/10.1002/nag.2775
Zhao J, Meng X, Chen L, Liu G, Zhang Z, Xu Q (2021) Correlation between the mechanical properties and the fiber breaking morphology of fiber reinforced shotcrete (FRS). Compos Struct 277:114641. https://doi.org/10.1016/j.compstruct.2021.114641
Acknowledgements
The authors are very grateful for the contributions of all field engineers and laboratory staff who participated in data collection and other facilitation.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of Interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Khan, M.U., Tahir, M.U., Emad, M.Z. et al. Investigating Strength Anisotropy of Plain and Steel Fiber Reinforced Shotcrete. Mining, Metallurgy & Exploration 40, 291–303 (2023). https://doi.org/10.1007/s42461-022-00715-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42461-022-00715-9