CSS Multi-column Layout Module Level 1

1. Introduction

(This section is not normative.)

This module describes multi-column layout in CSS. By using functionality described in this document, style sheets can declare that the content of an element is to be laid out in multiple columns.

On the Web, tables have also been used to describe multi-column layouts. The main benefit of using CSS-based columns is flexibility; content can flow from one column to another, and the number of columns can vary depending on the size of the viewport. Removing presentation table markup from documents allows them to more easily be presented on various output devices including speech synthesizers and small mobile devices.

Multi-column layouts are easy to describe in CSS. Here is a simple example:

body { column-width: 12em }

The number of columns can also be set explicitly in the style sheet:

body { column-count: 2 }

The shorthand columns property can be used to set either, or both, properties in one declaration.

body { columns: 2 }
body { columns: 12em }
body { columns: 2 12em }

Another group of properties introduced in this module describe gaps and rules between columns.

body {
  column-gap: 1em;
  column-rule: thin solid black;
}

The values of the column-rule property are similar to those of the CSS border properties. Like border, column-rule is a shorthand property.

body {
  column-gap: 1em;
  column-rule-width: thin;
  column-rule-style: solid;
  column-rule-color: black;
}

The column-fill and column-span properties give style sheets a wider range of visual expressions in multi-column layouts.

div { column-fill: balance }
h2 { column-span: all }

This specification introduces ten new properties, all of which are used in the examples above.

If all column properties have their initial value, the layout of an element will be identical to a multi-column layout with only one column.

2. The multi-column model

A multi-column container (or multicol container for short) is an element whose column-width or column-count property is not auto and therefore acts as a container for multi-column layout.

In the traditional CSS box model, the content of an element is flowed into the content box of the corresponding element. Multi-column layout introduces a new type of container between the content box and the content, namely the column box (or column for short). The content of a multicol container is flowed into its column boxes.

Column boxes in a multi-column container are arranged into rows. Like table cells, the column boxes in a row are ordered in the inline direction of the multicol container. The column width is the length of the column box in the inline direction. The column height is the length of the column box in the block direction. All column boxes in a row have the same column width, and all column boxes in a row have the same column height. Within each row in the multi-column container, adjacent column boxes are separated by a column gap, which may contain a column rule. All column gaps in the same row are equal. All column rules in the same row are also equal, if they appear; column rules only appear between columns that both have content.

In the simplest case a multicol container will contain only one row of columns, and the height of each column will be equivalent to the used height of the multi-column container’s content box.

Column gaps (diagonal hatching) and column rules are shown in this sample rendition of a multi-column container with padding (cross hatching). The hatched areas are present for illustrational purposes only. In actual implementations these areas will be determined by the background, the second image shows a rendering of a multi-column container with column-rules.

If the multi-column container is paginated, the height of each row is constrained by the page and the content continues in a new row of column boxes on the next page; a column box never splits across pages.

The same effect occurs when a spanning element divides the multi-column container: the columns before the spanning element are balanced and shortened to fit their content. Content after the spanning element then flows into a new row of column boxes.

Column boxes are block container boxes. The multi-column container is the principal box, and column boxes are anonymous.

Note: Column boxes do not become the containing block for elements with position: fixed or position: absolute. The containing block is the multicol element, it being the principal box.

In this example, the multi-column container has position: relative thus becoming the containing block. The image is a direct child of the multi-column container and has position: absolute. It takes positioning from the multi-column container and not from the column box.

.container {
  position: relative;
  column-count: 3;
}
img {
  position: absolute;
  top: 20px;
  left: 40px;
}

In this example, the width of the image is set with these rules:

img { display: block; width: 100% }

Given that the width is calculated relative to the column box, the image will be as wide as the column box:

Floats that appear inside multi-column layouts are positioned with regard to the column box where the float appears.

In this example, this CSS fragment describes the presentation of the image:

img { display: block; float: right }

A multi-column container establishes a new block formatting context, as per CSS 2.1 section 9.4.1.

A top margin set on the first child element of a multicol container will not collapse with the margins of the multicol container.

Nested multi-column containers are allowed, but there may be implementation-specific limits.

Note: It is not possible to set properties/values on column boxes. For example, the background of a certain column box cannot be set and a column box has no concept of padding, margin or borders. Future specifications may add additional functionality. For example, columns of different widths and different backgrounds may be supported.

Note: Multicol containers with column heights larger than the viewport may pose accessibility issues.

3. The number and width of columns

Finding the number and width of columns is fundamental when laying out multi-column content. These properties are used to set the number and width of columns:

• column-count
• column-width

A third property, columns, is a shorthand property which sets both column-width and column-count.

Other factors, such as explicit column breaks, content, and height constraints, may influence the actual number and width of columns.

3.1. column-width

This property describes the width of columns in multicol containers.

auto

means that the column width will be determined by other properties (e.g., column-count, if it has a non-auto value).

<length>

describes the optimal column width. The actual column width may be wider (to fill the available space), or narrower (only if the available space is smaller than the specified column width). Negative values are not allowed. Used values will be clamped to a minimum of 1px.

div {
  width: 100px;
  column-width: 45px;
  column-gap: 0;
  column-rule: none;
}

div {
  width: 40px;
  column-width: 45px;
  column-gap: 0;
  column-rule: none;
}

To ensure that column-width can be used with vertical text, column width means the length of the line boxes inside the columns.

Note: The reason for making column-width somewhat flexible is to achieve scalable designs that can fit many screen sizes. To set an exact column width, the column gap and the width of the multicol element (assuming horizontal text) must also be specified.

3.2. column-count

This property describes the number of columns of a multicol container.

auto

means that the number of columns will be determined by other properties (e.g., column-width, if it has a non-auto value).

<integer>

describes the optimal number of columns into which the content of the element will be flowed. Values must be greater than 0. If both column-width and column-count have non-auto values, the integer value describes the maximum number of columns.

body { column-count: 3 }

3.3. columns

This is a shorthand property for setting column-width and column-count. Omitted values are set to their initial values.

columns: 12em;      /* column-width: 12em; column-count: auto */
columns: auto 12em; /* column-width: 12em; column-count: auto */
columns: 2;         /* column-width: auto; column-count: 2 */
columns: 2 auto;    /* column-width: auto; column-count: 2 */
columns: auto;      /* column-width: auto; column-count: auto */
columns: auto auto; /* column-width: auto; column-count: auto */

3.4. Pseudo-algorithm

The pseudo-algorithm below determines the used values for column-count (N) and column-width (W). There is one other variable in the pseudo-algorithm: U is the used width of the multi-column element.

Note: The used width U of the multi-column container can depend on the element’s contents, in which case it also depends on the computed values of the column-count and column-width properties. This specification does not define how U is calculated. Another module (probably the Basic Box Model [CSS3BOX] or the Intrinsic & Extrinsic Sizing Module [CSS3-SIZING]) is expected to define this.

The floor(X) function returns the largest integer Y ≤ X.

(01)  if ((column-width = auto) and (column-count = auto)) then
(02)      exit; /* not a multicol container */
(03)  if column-width = auto then
(04)      N := column-count
(05)  else if column-count = auto then
(06)      N := max(1,
(07)        floor((U + column-gap)/(column-width + column-gap)))
(08)  else
(09)      N := min(column-count, max(1,
(10)        floor((U + column-gap)/(column-width + column-gap))))

And:

(11)  W := max(0, ((U + column-gap)/N - column-gap))

For the purpose of finding the number of auto-repeated tracks, the UA must floor the track size to a UA-specified value to avoid division by zero. It is suggested that this floor be 1px or less.

In fragmented contexts such as in paged media, user agents may perform this calculation on a per-fragment basis.

The used value for column-count is calculated without regard for explicit column breaks or constrained column heights, while the actual value takes these into consideration.

In this example, the actual column-count is higher than the used column-count due to explicit column breaks:

div {
  width: 40em;
  columns: 20em;
  column-gap: 0;
}

p {
  break-after: column;
}

<div>
  <p>one
  <p>two
  <p>three
</div>

div {
  width: 80em;
  height: 10em;
  columns: 20em;
  column-gap: 0;
  column-fill: auto;
}

<div>foo</div>

3.5. Stacking context

All column boxes in a multi-column container are in the same stacking context and the drawing order of their contents is as specified in CSS 2.1. Column boxes do not establish new stacking contexts.

4. Column gaps and rules

Column gaps and rules are placed between columns in the same multicol container. The length of the column gaps and column rules is equal to the column height. Column gaps take up space. That is, column gaps will push apart content in adjacent columns (within the same multicol container).

A column rule is drawn in the middle of the column gap with the endpoints at opposing content edges of the multicol container. Column rules do not take up space. That is, the presence or thickness of a column rule will not alter the placement of anything else. If a column rule is wider than its gap, the adjacent column boxes will overlap the rule, and the rule may possibly extend outside the box of the multicol container. Column rules are painted just above the border of the multicol element. For scrollable multicol elements, note that while the border and background of the multicol element obviously aren’t scrolled, the rules need to scroll along with the columns. Column rules are only drawn between two columns that both have content.

4.1. column-gap

column-gap accepting <length-percentage> is at risk, and may be reverted to <length>.

<length-percentage>

Specifies the gap between columns. If there is a column rule between columns, it will appear in the middle of the gap.

The <length> or <percentage> cannot be negative.

normal

Identical to <length-percentage>, but with a used value of 1em.

4.2. column-rule-color

<color>

Specifies the color of the column rule.

4.3. column-rule-style

The column-rule-style property sets the style of the rule between columns of an element. The <line-style> values are interpreted as in the collapsing border model.

The none value forces the computed value of column-rule-width to be 0.

4.4. column-rule-width

This property sets the width of the rule between columns. Negative values are not allowed.

4.5. column-rule

This property is a shorthand for setting column-rule-width, column-rule-style, and column-rule-color at the same place in the style sheet. Omitted values are set to their initial values.

In this example, the column rule and the column gap have the same width. Therefore, they will occupy exactly the same space.

body {
  column-gap: 1em;
  column-rule-width: 1em;
  column-rule-style: solid;
  column-rule-color: black;
}

5. Column breaks

When content is laid out in multiple columns, the user agent must determine where column breaks are placed. The problem of breaking content into columns is similar to breaking content into pages, which is described in CSS 2.1, section 13.3.3 [CSS21].

Three new properties are introduced to allow column breaks to be described in the same properties as page breaks: break-before, break-after, and break-inside.

5.1. break-before, break-after, break-inside

break-before, break-after, and break-inside are defined in [CSS3-BREAK].

6. Spanning columns

The column-span property makes it possible for an element to span across several columns.

6.1. column-span

This property describes how many columns an element spans across. Values are:

none

The element does not span multiple columns.

all

The element spans across all columns of the nearest multicol ancestor in the same block formatting context. Content in the normal flow that appears before the element is automatically balanced across all columns in the immediately preceding column row before the element appears. The element establishes an independent formatting context.

Note: Whether the element establishes a new formatting context does not depend on whether the element is a descendent of a multicol or not. When column-span is all, it always does. This helps with robustness of designs to later revisions that remove the multicol, or when media queries turn the multicol off in some situations.

An element that spans more than one column is called a spanning element and the box it creates is called a spanner.

In this example, an h2 element has been added to the sample document after the sixth sentence (i.e., after the words "the leg of a"). This styling applies:

h2 { column-span: all; background: silver }

By setting column-span to all, all content that appears before the h2 element is shown before the h2 element.

A spanning element may be lower than the first level of descendants as long as they are part of the same formatting context. If the fragment before the spanner is empty, nothing special happens; the top margin/border/padding is above the spanning element, as an empty fragment.

In this example the multicol container is the article element. Inside this parent is a paragraph and then a section element. The section contains an h2 heading set to all this spans all three columns while the containing section remains inside the column boxes.

The h2 is the first child of the section. This means that the margin, border (shown in red in the diagram) and padding on this section appear before the spanning h2 as an empty fragment.

<article>
  <p>...</p>
  <section>
    <h2>An h2 element</h2>
    <p>...</p>
  </section>
</article>

section {
  border: 2px solid red;
  margin-top: 3em;
  padding-top: 2em;
}

h2 {
  column-span: all;
  background: silver
}

A spanning element takes up more space than the element would take up otherwise. When space is limited, it may be impossible to find room for the spanning element. In these cases, user agents may treat the element as if none had been specified on this property.

In this example, the H2 element appears later in the content, and the height of the multicol container is constrained. Therefore, the H2 element appears in the overflow and there is not room to make the element spanning. As a result, the element appears as if 'column-span: none' was specified.

This example is similar to the previous example, except that the H2 element appears naturally in the last column. Still, there is not enough room to make the element spanning.

In fragmented contexts spanning elements are honored in all fragments. In this example, we are in paged media, and the first three paragraphs have column breaks after them. An spanning H2 element appears after the fourth paragraph.

Spanners establish new formatting contexts, but their margins can be changed by their surroundings. In this example, two spanners naturally end up at the top of a page. The top margin of the first spanner is truncated due to adjoining an unforced break. The margins between the two spanners collapse with each other. However, the bottom margin of the second spanner does not collapse with the top margin of the subsequent element.

h2 {
  margin: 0.5em 0;
  column-span: all;
  background: silver
}
p { margin-top: 1em }

7. Filling columns

There are two strategies for filling columns: columns can either be balanced, or not. If columns are balanced, user agents should try to minimize variations in column height, while honoring forced breaks, widows and orphans, and other properties that may affect column heights. If columns are not balanced, they are filled sequentially; some columns may end up partially filled, or with no content at all.

7.1. column-fill

The values are:

balance

Balance content equally between columns, as far as possible. In fragmented contexts, only the last fragment is balanced.

balance-all

Balance content equally between columns, as far as possible. In fragmented contexts, all fragments are balanced.

auto

fill columns sequentially

In continuous contexts, this property does not have any effect when there are overflow columns.

In this example, an article only has one short paragraph which fits on three lines. The three lines are displayed in three different columns due to column balancing.

article {
  width: 60em;
  height: auto;
  columns: 4;
  column-fill: balance;
}

In this example, column balancing is turned off:

article {
  width: 60em;
  height: auto;
  columns: 4;
  column-fill: auto;
}

As a result, the first column is filled with all content:

In this example, an article has two paragraphs: first a long one, then a shorter one. This code is applied:

article {
  width: 60em;
  height: auto;
  columns: 4;
  column-fill: balance;
}

p {
  break-after: column;
}

The shortest column height possible contains five lines of text. After the column height has been established, columns are filled sequentially. As a result, the third column is as high as the first two columns, while the last column ends up being significantly shorter.

article {
  width: 60em;
  height: auto;
  columns: 4;
  column-fill: balance;
}

In this example, an article starts with an unbreakable figure which sets the column height. Subsequent content is filled sequentially into the remaining columns:

8. Overflow

8.1. Overflow inside multicol containers

Except for cases where this would cause a column break, content that extends outside column boxes visibly overflows and is not clipped to the column box.

Note: See §5 Column breaks for column breaks and §8.2 Pagination and overflow outside multicol containers for whether it is clipped to the multi-column container’s content box.

In this example, the image is wider than the column:

8.2. Pagination and overflow outside multicol containers

Content and column rules that extend outside column boxes at the edges of the multi-column container are clipped according to the overflow property.

A multicol container can have more columns than it has room for due to:

• a declaration that constrains the column height (e.g., using height or max-height). In this case, additional column boxes are created in the inline direction
• the size of the page. In this case, additional column boxes are moved to the next page(s).
• explicit column breaks. In this case, additional column boxes are created in the inline direction for continuous contexts, and additional column boxes are moved to the next fragment(s) for fragmented media.

Columns that appear outside the multicol container in continuous contexts are called overflow columns. Overflow columns can effect the height of the multicol container.

In this example, the height of the multi-column container has been constrained to a maximum height. Also, the style sheet specifies that overflowing content should be visible:

div {
  max-height: 5em;
  overflow: visible;
}

As a result, the number of columns is increased.

In continuous contexts overflow columns can effect the height of the multicol container. In this example a column appears in the overflow which has four lines of text. The multicol container is made tall enough to accomodate this column.

In fragmented contexts, the overflow content goes into columns in subsequent fragments. Given the same content as in the previous example and a page box that only has room for five lines of formatted text, this would appear on the first page:

Assuming column balancing, this would appear on the second page:

In this example, explicit column breaks are generated after paragraphs:

p {
  break-after: column;
}

As a result, the number of columns increases and the extra columns are added in the inline direction:

In paged media, extra columns are shown on the next page. Given the same code as the previous example, the last paragraph appears on the second page. This would appear on the first page:

This would appear on the second page:

Due to column balancing, the last paragraph is split across three columns.

Appendix B. Changes

This appendix is informative.

Changes from the Working Draft (WD) of 5 October 2017

• Changed references to paged media to refer to fragmented contexts. Resolved 12 Apr 2018.
• Changed a line regarding the column-fill property:
  In continuous media, this property does not have any effect in overflow columns.
  To:
  In continuous media, this property does not have any effect when there are overflow columns. Resolved: 12 Apr 2018
• Add a line of text plus an example to show that overflow columns can effect the multicol container height. Resolved: 12 Apr 2018
• Replaced the HTML mock-up examples with SVG versions, as the examples were unclear. Issue 1087.
• Changed the value of normal for column-gap to be 1em, rather than a UA-specified length with a suggestion of 1em. Resolved: 4 Apr 2018
• Clarified that negative values are not allowed for column-width, and that while 0 may be specified, used values will be clamped to a minimum of 1px. Resolved: 14 Mar 2018
• Clarified that where there is a spanning element content is automatically balanced across all columns in the immediately preceding column row before the element appears. Resolved: 9 Nov 2017
• Added clarification plus an additional example that spanning elements may be lower the the first level of descendents, and that in the case of margins, borders and padding on the element containing the spanning, this would be drawn above the spanner. Resolved: 8 Nov 2017
• Changed the sentence Column rules are painted in the inline content layer, but below all inline content inside the multicol element. to Column rules are painted just above the border of the multicol element. For scrollable multicol elements, note that while the border and background of the multicol element obviously aren’t scrolled, the rules need to scroll along with the columns. Resolved: 7 Nov 2017
• Under section The Multi-column Model, removed two sentences That is, column boxes behave like block-level, table cell, and inline-block boxes as per CSS 2.1, section 10.1, item 2 CSS21. However, column boxes do not establish block container boxes for elements with position: fixed or position: absolute.. THese were replaced with a clarification about the principal box and a new example showing how abspos elements refer to the multicol container. Resolved: 7 Nov 2017
• Removed the sentence "To indicate where column breaks should (or should not) appear, new keyword values are introduced." and following example (Example 7 in the WD published 5 Oct 2017) as the multicol specification no longer introduces these properties. Editorial
• Changed how we reference the element we have applied multicol to from multi-column or multicol element to multi-column or multicol container. Resolved: 22 November 2017
• Removed the example which stated "If a tall image is moved to a column on the next page to find room for it, its natural column may be left empty. If so, the column is still considered to have content for the purpose of deciding if the column rule should be drawn." Resolved: 7 September 2017

Changes from the Candidate Recommendation (CR) of 12 April 2011.

• Added July 2016 resolution to change the the track size floor to a required UA-specified value, consistent with the CSS Grid spec. Resolved: 7 Jan 2016
• Remove the restriction about overflow columns only being in continuous media in the statement that column-fill has no effect on overflow columns. Resolved: September 2013.
• Added keyword balance-all and examples to demonstrate how this should work. Resolved: September 2013.
• The pseudo-algorithm has been revised on a number of occasions. Latest change Feb 2013.
• Clarified that properties columns, column-width, column-count "apply to block containers". Ref: Feb 2013.
• Breaking properties have beeen moved from this specification to the CSS Fragmentation Module.
• Change to column-fill wording to clarify that column-fill is honored before page breaks. Ref: Jan 2012.
• Amended example and text to clarify what happens with margin collapsing and spanning elements. Ref: Oct 2013.
• Clarification that column-rule-width does not alter the size or placement of columns. Ref: Sep 2013.
• Added that each column spanning element establishes a separate BFC margins between them collapse. Ref: Dec 2011.
• Column rules are painted in the inline content layer, but below all inline content inside the multicol. Ref: Feb 2013.
• Clarify that column-span causes the element to establish a formatting context even if it is not in a multicol.
• Column spanners do not always establish a block formatting context.
• Allow column-gap to accept <length-percentage> instead of just <length>
• column-width and column-count applies to block containers except table wrapper boxes.
• Content that overflows columns is not clipped.

Acknowledgments

This document is based on several older proposals and comments on older proposals. Contributors include:

Alex Mogilevsky, Andy Clarke, Anton Prowse, Bert Bos, Björn Höhrmann, Cédric Savarese, Chris Lilley, Chris Wilson, Daniel Glazman and Dave Raggett, David Hyatt, David Singer, David Woolley, Elika Etemad, Giovanni Campagna, Ian Hickson. Joost de Valk, Kevin Lawver, L. David Baron, Markus Mielke, Melinda Grant, Michael Day, Øyvind Stenhaug, Peter Linss, Peter-Paul Koch, Robert O’Callahan, Robert Stevahn, Sergey Genkin, Shelby Moore, Steve Zilles, Sylvain Galineau, Tantek Çelik, Till Halbach,