Self Assembly

In this study, hydrogen sensing properties of nanoporous Pd films based on Anodic Aluminium Oxide (AAO) templates grown on a silicon substrate have been investigated at various temperatures (25–100°C) and hydrogen concentrations (100–1000 ppm) to determine the temperature-sensitivity relationship. For this purpose, a hexagonally shaped AAO template of approximately 50 nm in diameter and 700 nm in length with 80 nm interpore distances was fabricated using two-step anodization of an Al film deposited on an n-type (100) oriented oxidized Si substrate. Then, the nanoporous surface of the AAO template was used as a substrate for supporting a nanoporous Pd film of an approximately thickness of 60 nm. The morphologies of the AAO template and Pd film coated on the AAO template were studied mainly by Scanning Electron Microscopy (SEM). Hydrogen sensing properties of the nanoporous Pd film were measured using a resistance transient method. It was found that the sensor response of the nanoporous Pd films on the AAO template was better than the traditional Pd thin film sensors, the sensitivity of the sensor was approximately 1.8% for 1000 ppm H2, and the detection limit was lower than 100 ppm at room temperature. The highest sensitivity was measured at room temperature.

Dehydration/condensation reactions between organic molecules in the prebiotic environment increased the inventory and complexity of organic compounds available for self-assembly into primitive cellular organisms. As a model of such reactions and to demonstrate this principle, we have investigated the esterification reaction between glycerol and decanoic acid that forms glycerol monodecanoate (GMD). This amphiphile enhances robustness of self-assembled membranous structures of carboxylic acids to the potentially disruptive effects of pH, divalent cation binding and osmotic stress. Experimental variables included temperature, water activity and hydrolysis of the resulting ester product, providing insights into the environmental conditions that would favor the formation and stability of this more evolved amphiphile. At temperatures exceeding 50 degrees C, the ester product formed even in the presence of bulk water, suggesting that the reaction occurs at the liquid interface of the two reactants and that the products segregate in the two immiscible layers, thereby reducing hydrolytic back reactions. This implies that esterification reactions were likely to be common in the prebiotic environment as reactants underwent cycles of wetting and drying on rare early landmasses at elevated temperatures.

Amphiphilic gold nanoclusters with the diameter of 1.8 ± 0.2 nm were prepared by decomposition of organometallic gold precursor CH3AuPPh3 in the presence of mercaptoacids in o-xylene. Self-assembly of the 16-mercaptohexadecanoic acid protected gold clusters led to the formation of the nanosheets consisted of aligned gold clusters. The hydrogen bonding between the carboxylic groups attached on the adjacent gold clusters likely drives the self-assembly. This phenomenon was cross-verified by employing the preheated mercaptoacid-amine surfactant system where a part of the mercaptoacids and amines were converted into –NH3+–−OOC– ion pair and interrupting a part of the hydrogen bonding sites to lead to the reduction in the size of the structures from nanosheets to nanobelts. Interestingly, we found the dependency of the luminescent properties on the extent of maintaining the self-assembly of the clusters intern dictated by the surfactants.

The design of functional cyclodextrin (CD) nanoparticles is a developing area in the field of nanomedicine. CDs can not only help in the formation of drug carriers but also increase the local concentration of drugs at the site of action. CD monomers form aggregates by self-assembly, a tendency that increases upon formation of inclusion complexes with lipophilic drugs. However, the stability of such aggregates is not sufficient for parenteral administration. In this review CD polymers and CD containing nanoparticles are categorized, with focus on self-assembled CD nanoparticles. It is described how the nanoparticles can be stabilized and tuned to have specific properties.