Non Traditional Machining

The present study focuses on optimizing the process parameters during machining of NiTi (Nickel-Titanium) shape memory alloy by wire electric discharge machining (Wire EDM) for simultaneously maximizing material removal rate and minimizing tool wear rate u sing brass wire as electrode. Taguchi's design with utility and modified utility optimization techniques have been used for simultaneous multi-response optimization. Different analyses were performed to determine the optimal settings in both utility and mo dified utility concepts. The optimal results of both methods disclose that the pulse on time of 115µsec and pulse off time of 40µsec with spark gap set voltage of 20V are useful for maximizing material removal rate and minimizing tool wear rate. The optimization results indicate that the spark gap set voltage is the majority significant parameter that affects the tool wear rate and material removal rate.

Ultrasonic Machining is the oldest form of machining process which can be used to machine brittle materials such as glass and ceramics. The paper says about Parametric Optimization of Ultrasonic Machining Process Using Gravitational Search, Latest Machining Technologies of Hard to Cut Materials by Ultrasonic Machining Process, Ultrasonic assisted milling of reinforced plastics, recent advancements in USM, Recent developments in micro USM. The parameters involved in it are MRR and Tool Feed Mechanism.

Non-traditional machining (NTM) processes are now being widely used to generate intricate and accurate shapes in materials, like titanium, stainless steel, high strength temperature resistant (HSTR) alloys, fiber-reinforced composites, ceramics, refractories and other difficult-to-machine alloys having higher strength, hardness, toughness and other diverse material properties. Generation of complex shapes in such materials by the traditional machining processes is experienced to be difficult. Selection of the most suitable nonconventional machining process (NCMP) for a given machining application can be viewed as multi-criteria decision making (MCDM) problem with many conflicting and diverse criteria. To aid these selection processes, different MCDM methods have been proposed. This paper introduces the use of an almost unexplored MCDM,OCRA and NCMP selection problems.

Ultrasonic Machining is a mechanical material removal process that makes use of ultrasonic waves and abrasive slurry to remove the material from the workpiece. Ultrasonic Machining is mainly used to machine hard and brittle materials with low ductility. USM is generally used to machine materials with hardness above 40 HRC (Rockwell Hardness Number). Ultrasonic Machining came into prominence due to the development of new materials that were harder than most available materials and these include high strength, stainless and heat resistant steels, and alloys, titanium, ceramics, glasses, etc. Using Traditional machining processes on these materials proved to be ineffective as even harder materials are required to make tools to machine them and chipping or fracturing of these materials occur and results in poor surface finish. Hence, to overcome the ineffectiveness of traditional machining processes nontraditional machining processes were developed and ultrasonic machining is one of them. USM makes use of microcracking mechanics to machine these hard and brittle materials. To optimize this machining process, it is important to understand how different output parameters like material removal rate, surface finish, tool wear, and accuracy are affected by different process parameters like amplitude and frequency of vibrations, grain diameter, static load, etc. Proper optimization is very important as it affects machining time, product cost, and other process characteristics. The following report gives an overview of these parameters and how this affects the different process characteristics of the Ultrasonic machining process.

Newly developed metals and non-metals with extraordinary properties make traditional machining difficult or impossible leading to the development of non-traditional machining (NTM) processes. Large number of available alternatives, conflicting process criteria, limitations for processing different materials and shape applications and insufficiency of expert decision makers make NTM process selection problems complex. In this paper, the weighted utility additive (WUTA) method is proposed for solving the NTM selection problems. In order to validate the method one problem with previously published data is solved and obtained results are compared to the previous results. It is observed that the proposed WUTA method is quite proficient to solve such type of complex multi-criteria decision making (MCDM) problems with conflicting criteria. Furthermore, the proposed method is applied to find out the best suitable NTM process to generate a through cavity on ceramics with (t/w) <10. 1. Introduction Non-traditional machining (NTM) processes also known as non-conventional processes is a group of processes which uses mechanical, electrical, chemical or thermal energy or combination of these energies, but do not use sharp cutting tools in the conventional sense for removal of superfluous materials from the work piece. Requirement of advanced geometric designs on newly developed exotic work materials create intricate challenges on conventional manufacturing processes to attain the expected quality of work. This led to the development and establishment of NTM processes in the industry as efficient alternatives to conventional ones. Processing capabilities of NTM processes for required work material and shape feature combination is a key decision factor in NTM process selection [1]. Nowadays, different NTM processes with numerous highly developed capabilities are available and modernized recurrently [2, 3]. The selection of a non-traditional machining (NTM) process is often observed to be a multi-criteria decision-making problem with conflicting and diverse objectives. The past researchers using different MCDM methods in last few years have already successfully solved the NTM selection problems for different applications. Yurdakul and Çoğun [4] developed combined technique for order preference by similarity to ideal solution (TOPSIS) and an analytical hierarchy process (AHP) methods for NTM processes selection and proved the effectiveness of process through numerous examples. Chakraborty and Dey [5,6] have presented an AHP-based method for NTM process selection and also developed a QFD-based expert system for NTM processes selection, where a score value developed through prioritized comparison matrix is used to sequence the processes. Das Chakladar and Chakraborty [7] developed an automated expert system based on combined TOPSIS and AHP methods for automated NTM processes selection. In this paper, a modified UTA method considering the criteria weight values is proposed for NTM process selection and this novel approach is called as weighted UTA (WUTA) method.

Non-traditional machining (NTM) processes are now being widely used to generate intricate and accurate shapes in materials, like titanium, stainless steel, high strength temperature resistant (HSTR) alloys, fiber-reinforced composites, ceramics, refractories and other difficult-to-machine alloys having higher strength, hardness, toughness and other diverse material properties. Generation of complex shapes in such materials by the traditional machining processes is experienced to be difficult. Selection of the most suitable nonconventional machining process (NCMP) for a given machining application can be viewed as multi-criteria decision making (MCDM) problem with many conflicting and diverse criteria. To aid these selection processes, different MCDM methods have been proposed. This paper introduces the use of an almost unexplored MCDM,OCRA and NCMP selection problems.

Intricate metallurgical properties of newly developed materials and alloys as well as requirement of machining complex shape geometries for modern industrial applications boost demand for use of non-traditional machining (NTM) processes. Scarcity of expert manpower, conflicting multiple criteria as well as large number of alternatives with vastly different specifications and capabilities, make the NTM process selection a complex task. Therefore, selection of the most appropriate NTM process for a particular application needs the use of a systematic methodology. Even though, few multi-criteria decision-making methods have already been employed by the past researchers to select NTM processes, the need for a simple and sound mathematical approach still exists. In this paper, a simple mathematical model, i.e. reference point approach is applied to select the most suitable NTM processes for generating through cavities on ceramics and cylindrical through holes on titanium.

Electric discharge machining (EDM), sometimes colloquially also
referred to as spark machining, spark eroding, burning, die sinking or
wire erosion, is a manufacturing process whereby a desired shape is
obtained using electrical discharges (sparks). Material is removed
from the workpiece by a series of rapidly recurring current discharges
between two electrodes, separated by a dielectric liquid and subject
to an electric voltage. One of the electrodes is called the toolelectrode, or simply the ‘tool’ or ‘electrode’, while the other is called
the workpiece-electrode, or ‘workpiece’. EDM will help and support
the drive to quality cost and delivery. Knowledge of EDM will provide
the ability to design parts that are not possible or cost effective to
produce by any other method. The prospect of machining complex
shapes in hardened or exotic materials will continue to attract
engineers and designers to produce more challenging parts and
profile.

Non-traditional machining processes are widely used to manufacture geometrically complex and precision parts for aerospace, electronics and automotive industries There are different geometrically designed parts, such as deep internal cavities, miniaturized microelectronics and fine quality components may only be produced by non-traditional machining processes. This article discusses the principal process steps, specifications, defects, applications, of chemical blanking and chemical milling process in manufacturing industry. The process steps include precleaning, masking, scribing, etching, final cleaning, stripping, and mechanical finishing. The article describes the variables that affect undercut and surface finish obtained by CM. The mechanical properties of chemically milled parts are also discussed. Paper describes the chemical machining process, industrial application, applied chemical etchants and machined materials.

This paper reports the effects of machining parameters on surface roughness in cylindrical wire electrical discharge grinding (WEDG) process. In this research tungsten carbide is used as workpiece. A rotary axis spindle is set up in the electric discharge machine in a submerged dielectric environment so as to machine cylindrical parts. The speed of the spindle is maintained constant at 200 rpm. Experiments have been under different process conditions like peak current, voltage, pulse off time and number of passes. Number of passes in the wire electric discharge grinding decreases the surface roughness.

This article highlights and focuses on laser beam machining (LBM) of aluminum and its alloys. It begins by providing a brief overview of various conventional (chip forming) and nonconventional machining techniques employed for aluminum-based materials. Later, it explicitly provides features of LBM techniques employed for aluminum and its alloys for different types of machining.

Abrasive waterjet machining (AWJM) is a new machining process, the advantages of which include low cutting temperatures, no heat damage to the material being cut, minimal dust, and low cutting forces. This paper presents a state of the art review of research in this new process. The main topics discussed are mechanics of material removal, productivity, cutting forces, surface quality and nozzle wear.

The ultrasonic machining is the technique generally used in the machining of the brittle workpiece material by the repeated impact of the abrasive particle on the workpiece material. Unlike the other non-traditional machining process such as the electric discharge machining, chemical machining, electrochemical machining it will not thermally damage the workpiece nor it chemically damages the workpiece and also it will not appear to introduce the significant amount of the stress.The material removal rate and the surface finish of the USM have been influencing by many parameters which include the property of the workpiece material, size of the abrasive particle amplitude and frequency of the vibration tool, slurry concentration, tool material,and the static load. In this article, a review has been reported on the parameter such as the abrasive grain size, slurry concentration, amplitude and frequency of the tool vibration and the static load on the machining parameter of the ultrasonic machining such as the majorly discuss is the material removal rate and the surface finish these parameters are definitely would influence the selection of the different non-traditional machining process and also it will influence the selection of the various parameter that is desirable for their product in the industries.

Abrasive Jet Machine is the device used to remove material by means of high velocity carrier gas and Abrasive mixture. It is a non-traditional machining process where there is no physical contact between tool and work-piece. The Abrasive Jet machining can be employed for machining super alloys and refractory from materials. This process is based on surface erosion process. The process parameters that control metal removal rate are air quality and pressure, Abrasive grain size, nozzle material, nozzle diameter, stand of distance between nozzle tip and work surface.

9th International Conference on Advances in Mechanical Engineering (AME 2023) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications impacts and challenges of Mechanical Engineering. The conference documents practical and theoretical results which make a fundamental contribution for the development of Mechanical Engineering. The aim of the conference is to provide a platform to the researchers and practitioners from both academia as well as industry to meet and share cutting-edge development in the field.

Authors are solicited to contribute to the conference by submitting articles that illustrate research results, projects, surveying works and industrial experiences that describe significant advances in the following areas, but are not limited to:

Conventional machining of polymeric composite materials is often both technically and economically less effective because the structural characteristics inherent in fibre reinforcement promote excessive tool wear. In recent years, abrasive waterjet machining (AWJM) has been proving to be successful in the machining of such materials. This paper presents a state of the art review of research in AWJM of polymeric composite materials. Among the main topics discussed are mechanisms of material removal, productivity and surface quality

This paper gives an Insight on various research and activities carried out on the process of Abrasive Water Jet Machining (AWJM). AWJM process is briefly explained in the introduction section of the paper. This whole research is based on the process of material removal in AWJM as researched by various scholars. The last part of the paper gives the conclusion framed by us after reviewing the research papers on AWJM.

This report reviews the effect of process parameters in AJM on the MRR of the process. The report also discusses various ongoing researches and developments in AJM process parameters. Report compiles several research papers presented by various researchers and their findings. It is identified from the available literature Gas pressure, Nozzle tip distance, grain size of the Abrasive.

This paper provides a review on numerous research activities carried out on process variables of Abrasive Jet Machining. Operation, applications and a few limitations of AJM are briefly explained in the introduction section of the paper. The core of the paper identifies and explains process variables of AJM as researched by various scholars. The last part of the paper gives the conclusion drawn by us after reviewing research papers on process variables of AJM.

Despite the large number of abrasive waterjet machining (AWJM) models developed so far, there still has been confusion about the nature by which workpiece surfaces are eroded. The finite element method (FEM) could provide both qualitative and quantitative means in order to explain the AWJ erosion process. This paper presents an attempt to model the AWJM process using the powerful tool of the finite element method. The main objective is to develop an FE model which would enable to predict the depth of cut without any cutting experiments. The new model takes into account the precise representation of the constitutive behaviour of the workpiece material under AWJ dynamic loading conditions. Interaction of the abrasive particle with the workpiece material is traced at small time increments. The model accurately predicts the depth of cut as a result of AWJ impact and the results are in good agreement with experimental results.

In order to realize the manufacturing/machining demands thrived by newer, hard and difficult-to-machine materials being utilized in the present day industries, an assortment of non-traditional machining (NTM) processes has been developed over the past few decades. These processes are capable of generating intricate and complex shapes with high degree of accuracy, close dimensional tolerance and better surface finish. In this paper, a decision guidance framework is developed in Visual BASIC 6.0 to help the process engineers in selecting the most appropriate NTM process for a specific work material and shape feature combination. It also assists in identifying the ideal process parameter combinations for the most suitable NTM process. The derived results highly corroborate with the opinions of the experts in the related field, demonstrating the acceptability of the developed system.

Understanding the exact nature of erosion of workpiece materials by abrasive waterjet machining (AWJM) is still confused, although it is important for successful modeling of this promising process. This paper presents a first attempt to model the AWJM process using the powerful tool of the finite element method (FEM) in order to explain the abrasive particle-workpiece interaction. Also the model predicts the behaviour of the process. The main objective is to develop an FE model which would enable to predict the depth of cut without any cutting experiments. The new model takes into account the precise representation of the constitutive behaviour of the workpiece material under AWJ dynamic loading conditions which was ignored in previous AWJM models in which the flow stress was represented by a constant value. Additionally, deformations, stresses and strains occurring in the workpiece material in the vicinity of the cutting interface as a result of the erosion impact by AWJ, could be obtained. In the present model, forces acting on the abrasive particle need not be initially determined, as in previous AWJM studies, as they are automatically calculated at each time step. The results show that the finite element method is a useful tool in predicting abrasive-material interaction and AWJ depth of cut.

Despite the large number of abrasive waterjet machining (AWJM) models developed so far, there still has been confusion about the nature by which workpiece surfaces are eroded. It is believed that analysis of stresses generated at the AWJ cutting interafce could provide deeper insight to explain such an erosion behavior. This paper presents a stress analysis of AWJM using a nonlinear dynamic finite element (FE) code in order to explain the behaviour of the process. The main objective is to develop an erosion mechanism which would correctly describe the abrasive-material interaction. The new model considers both AWJ dynamic loading conditions and nonlinear material behavior. The results show that the workpiece material fails due to highly localized plastic deformation caused by compressive stresses, specially at the AWJ cutting interface. Also AWJM causes residual stresses to remain in the workpiece material after machining.

The main functions which feature the developed wire vibration detection and analysis system are: To be able to measure the wire position and displacement during machine idling as well as during EDM cutting. To perform a vibration analysis, based on the gathered data during the wire vibration measurements. This also in both modes, machining and idling. The vibration analysis includes, graphical output of the wire displacement data in a 2-D plane, Past Fourier Transform calculation (PFT), calculation of wire damping ratios, and frequency spectrum analysis.

Erosion of ductile materials by abrasive waterjet machining (AWJM) is still a complex phenomenon. This paper presents a first attempt to simulate the abrasive waterjet machining (AWJM) process using the finite element method (FEM) in order to determine the workpiece response in this erosive wear process. Additionally, deformations occurring in the workpiece material in the vicinity of the cutting interface as a result of the high speed AWJ impact could be obtained. The results indicate that the finite element method is a useful tool in the prediction of the AWJ deformations.

Abrasive waterjet cutting is one of the unconventional cutting processes capable of cutting extensive range of difficult-to-cut materials. This paper assesses the impact of process parameters on surface roughness which is a significant machining performance measure in abrasive waterjet cutting of hastelloy. The experimental parameters were selected based on Taguch's design of experiments. Experiments were conducted in varying nozzle traverse speed, abrasive mass flow rate and standoff distance for cutting hastelloy using abrasive waterjet cutting process. The effects of these parameters on surface roughness have been discussed.

Aim of the experimental investigation was to determine the
effect of electric discharge machining parameters on surface
roughness of oil hardened non shrinkable (O6) steel. Though
vast research has been done to improve the surface finish of hard
metal machined by EDM, optimal choice of parameters for best
performance measures is still challenge. The experiments were
carried out on adequate range of machining parameters. Selected
input parameters for this study were peak current, pulse-on-time,
and pulse-off-time. Pure copper electrode with positive polarity
in dielectric medium was used to perform the investigation. The
optimal machining parameters peak current (8 Amp), pulse on (45
μs) and pulse off (9 μs) were originated by using Taguchi method
and ANOVA analysis. Design of experiment approach was used to
model the experimental data. It is found that interactions between
Peak current, pulse on, Voltage Gap and Flushing Pressure have
significant effect on the surface roughness.

Modeling of abrasive waterjet machining (AWJM) has been finding widespread interest for the past twenty years. Due to the complex interaction of several AWJM parameters, combined with the nonlinear dynamic high speed impact of several thousands of small abrasive particles on the workpiece surface, the mechanism of material removal has not yet been fully understood. The current paper presents an attempt to explain the mechanism of material removal in AWJ, as a result of abrasive particle impact through step by step tracing of the abrasive particle as it is interacting with the workpiece material. The new model considers the elastic-plastic behavior of the workpiece material. Also the non linear dynamic loading conditions which are characteristic feautres of AWJM are accounted for in the pesent study. The failure of the workpiece material is examined analytically, by means of a virtual finite element (FE) AWJ experiment, and experimentally, by means of scanning electron microscopy (SEM) and surface topographies. Stress results indicate that the workpiece material is subject to severe highly localized plastic deformation and as a result, small overlapping craters are generated. These craters are formed by high compressive stresses at the cutting interface. The finite element results indicate a good agreement with experimental results.

Although several theoretical and experimental models have been developed for abrasive waterjet machining #AWJM), the exact nature of
erosion is not yet understood. This paper presents an attempt to model AWJM using the ®nite element method #FEM) in order to explain the
abrasive particle±workpiece interaction process. Also, the model predicts the depth of deformation as a result of abrasive particle impact.
The main objective is to develop an FE model which would enable the prediction of the depth of cut without any cutting experiments. The
new model takes into account the precise representation of the constitutive behavior of the workpiece material under AWJ dynamic loading
conditions which was ignored in the previous AWJM models. In the present model, forces acting on the abrasive particle need not be
initially determined, as in previous AWJM studies, as they are automatically calculated at each time step. The results show that plastic
deformation is very localized. Finally, the present FE results are consistent with experimental results.

This paper aims to develop a finite element (FE) model precisely simulating the multi-particle impact in the radial mode abrasive waterjet turning (AWJT). An explicit dynamic analysis was carried out to predict the crater profile resulting from the impact of the abrasive particles along a limited segment of the jet pass over the workpiece surface. The effect of both momentum transfer loss and abrasive load ratio was taken into consideration while calculating the impact velocity of the abrasive particles. To build a user-friendly model, the scripting feature of ABAQUS was involved to automatically perform all the repetitive modeling procedures. The presented FE model considers four variable turning parameters tested at five levels each, including impact velocity, abrasive mass flow rate, traverse rate, and workpiece speed. The obtained crater profile from the simulation process was utilized to calculate the depth of cut (DOC) at different parameter combinations. A comparison between ...

Abrasive Jet Machine is the device used to remove material by means of high velocity carrier gas and Abrasive mixture. It is a non-traditional machining process where there is no physical contact between tool and work-piece. The Abrasive Jet machining can be employed for machining super alloys and refractory from materials. This process is based on surface erosion process. The process parameters that control metal removal rate are air quality and pressure, Abrasive grain size, nozzle material, nozzle diameter, stand of distance between nozzle tip and work surface.

Nickel-based superalloy Inconel 718 is one of the hardest materials owing to its high hardness and additional physical properties. It is the most commonly used superalloy in gas turbine, aerospace, and automobile sectors. Micro-milling is generally employed for precision manufacturing of tiny structures, but it is difficult to obtain good surface quality with micro-milling Inconel 718 because of its excellent mechanical properties like high strength and hardness. Atmospheric pressure cold plasma jet can effectively improve surface wettability without changing surface micromorphology, which is expected to have positive lubricating effects in micro-machining of difficult-to-cut materials. In addition, minimum quantity lubrication can induce coolants into the machining area more efficiently, and is especially appropriate for micro-machining. In this paper, we propose a composite micro-milling method combining plasma jet and minimum quantity lubrication to machine Inconel 718. The effect of plasma jet on machinability is investigated by performing micro-milling experiments under different atmospheres (dry, nitrogen jet, plasma jet, minimum quantity lubrication, and plasma + minimum quantity lubrication). Surface roughness, cutting forces, and residual stress are the measures using corresponding techniques. The results indicate that the atmospheric pressure cold plasma jet can efficiently improve surface quality and reduce cutting forces of Inconel 718.

ABSTRACT Nickel alloys possess the excellent potential at high temperature and resistance to oxidation/corrosion owing to its high nickel content. These materials necessitate non-traditional machining methods. The rotary ultrasonic machining (RUM) process comes into existence as a superior alternative to the conventional machining of nickel alloys. The processing of these alloys using RUM needs attention. This article details the multi-response optimization in RUM of nickel alloy using the desirability concept. The present work is carried out with two shapes of the tool: (i) Plain tool and (ii) lateral slotted tool. During RUM, the process parameters—power rating tool rotation, abrasive diamond grit size and feed rate are varied. Compared with the plain tool, the lateral slotted tool shows the more efficient machining rate (MR) with less tool wear (TW). The micro-graphs disclose the mechanism of MR and TW during RUM.

Nickel alloys possess the excellent potential at high temperature and resistance to oxidation/corrosion owing to its high nickel content. These materials necessitate non-traditional machining methods. The rotary ultrasonic machining (RUM) process comes into existence as a superior alternative to the conventional machining of nickel alloys. The processing of these alloys using RUM needs attention. This article details the multi-response optimization in RUM of nickel alloy using the desirability concept. The present work is carried out with two shapes of the tool: (i) Plain tool and (ii) lateral slotted tool. During RUM, the process parameters-power rating tool rotation, abrasive diamond grit size and feed rate are varied. Compared with the plain tool, the lateral slotted tool shows the more efficient machining rate (MR) with less tool wear (TW). The micro-graphs disclose the mechanism of MR and TW during RUM.

In this paper, the effect of chromium powder mixed dielectric fluid on machining characteristics of AISI D2 die steel has been studied. Peak current, pulse on time, pulse off time, concentration of powder are the process parameters. The process performance is measured in terms of material removal rate (MRR), tool wear rate (TWR) and surface roughness (SR). The research outcome will identify the important process parameters that maximize MRR, minimize TWR and SR. The design of experiment has been undertaken using Taguchi method. ANOVA analysis has been used to investigate the percentage contribution of each process parameter for optimizing the performance. The study indicates that all the selected parameters except pulse off time have a significant effect on MRR. Current is found to be the most significant factor for MRR and TWR. With increase in current, TWR increases. Also, surface roughness increases with increase in pulse off time.

The abrasive waterjet machining (AWJM) process is so complex, due to the interaction of several working parameters, that its micro erosion mechanisms have not yet been completely understood. Understanding the interaction of a single abrasive particle with the workpiece material constitutes the basic step in understanding the occuring complex erosion phenomena. This paper presents the results of an extensive program of AWJ experimentation, which was recently carried out at the department of Machine Technology.

Erosion of ductile materials by waterjet machining is still a complex phenomenon. This paper presents a finite element model of the waterjet machining (WJM) process. Cutting forces, deformations and stresses occurring in the workpiece material in the vicinity of the cutting interface as a result of erosion impact by the waterjet could be obtained. The results indicate that the finite element method is a useful tool in the analysis of  this process. Further research work is currently being conducted by the authors.

The energy demands of world are increasing rapidly due to continuous economic development and population growth in developed as well as developing countries. Coal makes up around 27% of global primary energy and 37% of global electricity. Like other developing countries, India’s energy demands are also increasing. In India, Coal is the bulk primary energy contributor and demand of more than 70% of electricity is fulfilled by coal. Due to increasing energy demands, limited coal reserves and rapid increase in economic development, lots of question arises regarding life and qualities of the coal reserves. The aim of this research is to focus on availability of proved coal reserves, production and consumption of coal by different countries and regions of the world. The proved, indicated and inferred coal reserves available in different states of India have been discussed with production and consumption of coal by different states of India. Also, an attempt has been made to know the qualities of coal available in coal reserves of India. At last, life of coal of world as well as India has been estimated. The management policies that may be adopted to use coal in better ways considering environment pollutions have been discussed.

The experimental investigation of material removal rate, and micro hardness during machining of OHNS steel using
EDM machine was study in this paper. The input parameters include peak current, pulse on time; voltage gap and
flushing pressure were used for experimental work. Mean effect plot and S/N ratio graphs have been used to
optimize the machining parameters of EDM on OHNS steel using the Taguchi method and ANOVA methods. It can
be observed that Current has the largest effect on the material removal rate of OHNS steel by machining. It can be
observed that flushing pressure has the largest effect on the hardness of OHNS steel by machining. The optimum
machining condition for material removal rate (MRR) with positive polarity are Current (30 A), Pulse-on (100 µs)
Voltage Gap (10 v) and flushing pressure (20 lb/in2). The optimum machining condition for with positive polarity
for hardness are, Current (10 amp.), Pulse-on (100 µs), voltage gap (20 volt) and flushing pressure (10 lb/in2).

Nickel-based superalloy Inconel 718 is one of the hardest materials owing to its high hardness and additional physical properties. It is the most commonly used superalloy in gas turbine, aerospace, and automobile sectors. Micro-milling is generally employed for precision manufacturing of tiny structures, but it is difficult to obtain good surface quality with micro-milling Inconel 718 because of its excellent mechanical properties like high strength and hardness. Atmospheric pressure cold plasma jet can effectively improve surface wettability without changing surface micromorphology, which is expected to have positive lubricating effects in micro-machining of difficult-to-cut materials. In addition, minimum quantity lubrication can induce coolants into the machining area more efficiently, and is especially appropriate for micro-machining. In this paper, we propose a composite micro-milling method combining plasma jet and minimum quantity lubrication to machine Inconel 718. The effec...

Deviation in machining process due to the temperature influence, cutting force, tool wear leads to highly inferior quality of finished product, especially in high speed machining operations where product quality and physical dimensions seems to be meticulous. Moreover, temperature is a significant noise parameter which directly affects the cutting tool and work piece. Hence the aim of this project work is to study the machining effect on 6063 Aluminium alloy at varies combinations of process parameters such as speed, feed rate and depth of cut; and also to determine the effect of those parameters over the quality of finished product. A L 27 Orthogonal Array (OA) based Design of Experiments (DOE) approach and Response Surface Methodology (RSM) was used to analyse the machining effect on work material in this study. Using the practical data obtained, a mathematical model was developed to predict the temperature influence and surface quality of finished product. The ultimate goal of the study is to optimize the machining parameters for temperature minimization in machining zone and improvement in surface finish.