The Engine is powered by burning the air-fuel mixture inside the combustion chamber and the power is delivered to run the Vehicle. The mixture of air-fuel is required in the correct quantity to attain maximum efficiency. There are two...
moreThe Engine is powered by burning the air-fuel mixture inside the combustion chamber and the power is delivered to run the Vehicle. The mixture of air-fuel is required in the correct quantity to attain maximum efficiency. There are two valves present in the Engine cylinder head which is inlet and exhaust valve. This two valve will have different parameters, in which the exhaust valve is small and the inlet is big compared to the exhaust valve. Valve Guides and valve seats are very important for the continuous proper working of the inlet and exhaust valves. The valve guide is helpful for the valve to sit in the correct position with respect to the valve seat. Valve Guide is a cylindrical piece which is manually loaded in the machine and pressed into the cylinder head during the cylinder head machining process. Since the valve guide is inserted in the valve guide press machine manually there is a chance of inserting in the wrong direction inside the cylinder head. This problem leads to a drastic amount of scrap and increases in material cost. The solution to this problem can be solved by adding an airline and pressure sensor in the valve guide holder in valve guide press machine. This can eliminate the problem and also improves in the quality time and in the reduction of the amount of scrap.
