Distribution Power Flow

62 Followers

Recent papers in Distribution Power Flow

Top Papers
Most Cited Papers
Most Downloaded Papers
Newest Papers
People

Hydraulic and thermal design of a gas microchannel heat exchanger

Bookmark
Download
- by Gian Morini and +1
  J. Brandner
- •
- 15
  Engineering, Heat Transfer, Heat Exchanger, Numerical Simulation

Implementation of Three-Phase Transformer Model in Radial Load-Flow Analysis” Ain Shams Engineering journal

This paper presents an efficient approach for developing three-phase transformer admittance matrices in the radial power-flow analysis. The proposed transformer model overcomes the singularity problem of the nodal admittance submatrices of ungrounded transformer configurations. This has been achieved by applying symmetrical components modeling. The classical (6 × 6) transformer nodal admittance matrix written in phase components is converted to sequence components instead of the (3 × 3) admittance submatrices. In this model, the phase shifts accompanied with special transformer connections are included in the radial power-flow solution process without any convergence problems. The final model of the transformer is represented by a generalized power-flow equation written in phase components. The developed equation is applicable for all transformer connections. The transformer model is integrated into the radial power-flow and tested using the IEEE radial feeders. The results have shown that the developed transformer model is very efficient and the radial power-flow has robust convergence characteristics.

Bookmark
Download

Adaptive Power Flow Method for Distribution Systems with Dispersed Generation 1

Bookmark
Download
- by Jin Min
- •
- 3
  Electrical Engineering, Adaptive, Distribution Power Flow

Dec07kodad

Bookmark
Download

Implementation of three-phase transformer model in radial load-flow analysis

Bookmark
Download

Efficient SPF approach based on regression and correction models for active distribution systems

This study proposes efficient methods for sequential power flow (SPF) analysis of distribution systems with intermittent photovoltaic (PV) units and fluctuated loads. The proposed methods are based on machine learning techniques; more specifically, they use a regression trees (RTs) algorithm to construct a model for voltage estimation. This model is trained using synthetic data generated by a number of PV generation and load demand scenarios. The SPF methods that utilise iterative techniques have a high computational burden. In turn, the proposed method, which is called SPF-RT, is fast and accurate. Furthermore, the authors combine SPF-RT with a correction method to develop a new method, called SPF-RTC, which significantly reduces the estimation error of the RT model. The proposed methods are tested using a 33-bus distribution test system interconnected with two PV units. To assess the performance of the proposed methods, they conducted several experiments at different resolutions of day/year data. The proposed methods are compared with the iterative SPF methods and validated using the OpenDSS software. The simulation results demonstrate that the proposed methods outperform the other methods in terms of the computational speed. The SPF-RT and SPF-RTC methods are useful for real-time assessment of distribution systems with PV units.

Bookmark
Download
- by Karar Al-Nagar and +1
  Mohamed Naser
- •
- 6
  Photovoltaics, Power System, Electrical Power Distribution Systems, Distribution Power Flow

A Power Flow Method for Radial Distribution Feeders with DER Penetration

This paper presents a novel power flow method suitable for radial distribution feeders, which consists a modification of the simplified power flow concept known as the DistFlow method, already available in the literature. The proposed method relies upon a differentiated manipulation of power losses, which are taken into account in voltage calculations, unlike other simplified methods, where losses are totally neglected. As a result, calculation accuracy is greatly improved, in terms of node voltages, losses and overall active & reactive power flows. In addition, the proposed method is non-iterative and entirely linear, being easily implementable and fast in execution. The method is particularly suited for feeders with a high penetration of Distributed Energy Resources (DER), providing results that closely match those of a full non-linear power flow and are considerably more accurate than the traditional linearized distribution power flow methods, without any increase in computational burden. The new method is applied to a variety of case studies in the paper, to demonstrate its accuracy and effectiveness, comparing its performance with the simplified (linearized) DistFlow and a conventional non-linear power flow method.

Bookmark
Download

A comparative study of Pareto optimal approaches for distribution system reconfiguration

Reconfiguration of a power distribution system consists in changing the functional links among its elements and represents one of the most important actions for the improvement of system performance in operation. In the last few years, some authors have proposed approaches based on Pareto optimality for problem formulation of reconfiguration, with active power losses and reliability indices as objectives. The study highlights the optimization importance of reliability indices which refer to the interruption frequency, especially because, in the context of smart grids, the fastness of the reconfiguration method contributes, by itself, to reduce the duration of interruptions. There is no unique recognition concerning which approach is the most suitable to be used in order to solve the reconfiguration as a Pareto-optimal problem. The most important aspect is the way in which the specific information of the problem field is modelled in the implementation. Also, the dimension of a Pareto-front can vary widely from a test system to another.

Bookmark
Download

Distribution Power Flow

Log In