Pharmaceutical Science

Recently, statistical techniques such as design of experiments are being applied for efficient optimization of oral formulations. To use these statistical techniques for inhalation formulations, efficient methods for rapid determination of the aerodynamic particle size distribution of many samples are needed. Therefore, we aimed to develop a simple method to measure aerodynamic particle size distribution that closely agrees with the results of inhalation characteristic tests. We added attachments for dispersion to the aerodynamic particle sizer (APS) so that formulations could be dispersed under the same condition as for multi-stage liquid impinger (MSLI) measurement. Then, we examined the correlation between MSLI and APS using lyophilizate for dry powder inhalation formulations that generate porous particles just on inhalation. It is difficult to obtain the accurate aerodynamic particle size distribution of porous particles by APS because the particle density is difficult to estima...

Ghrelin is the peptide that increases the hunger sensation and food intake and is expected to be clinically applied for treatment of diseases such as cachexia and anorexia nervosa. In the clinical application of ghrelin, injections are problematic in that they are invasive and inconvenient. Thus, we aimed to develop a formulation that can eliminate the need for injections and can be applied clinically. We prepared formulations of an hGhrelin derivative, in which the octanoyl group essential for expression of activity is modified to avoid rapid des-acylation, using lyophilizate for a dry powder inhalation (LDPI) system. The formulation of hGhrelin derivative was optimized by the addition of phenylalanine, of which the fine particle fraction of 5 µm or less was 41.7 ± 3.8%. We also performed pharmacokinetic/pharmacodynamic tests in monkeys using the optimum formulation that can be applied clinically. The absolute bioavailability of inhaled hGhrelin derivative with respect to that intr...

It has been previously reported that active vitamin D3 (VD3) is a candidate drug that can repair alveolar damage in chronic obstructive pulmonary disease at a very low dose. We herein report the optimization of a very low-dose formulation of VD3 for dry powder inhalation by a simple method based on time-of-flight (TOF) theory. As the preparation content of VD3 is very low, aerodynamic particle size distribution cannot be measured by pharmacopeial methods that require quantification of the main drug. Thus, a simple method based on TOF theory, which can measure aerodynamic particle size distribution without quantification, was used. The optimized formulation for an inhalation system using a lyophilized cake contained phenylalanine as the excipient (VD3 1 μg/vial + phenylalanine 0.3 mg/vial) and showed high performance with fine particle fraction ≤ 3 μm = 47.2 ± 4.4%. The difference between the results of pharmacopeial methods and simple method was examined using the formulation contai...

Inhalation of proteins/peptides has recently received attention as various biopharmaceuticals have emerged on the market. Novel lyophilisates for dry powder inhalation (LDPIs), which are aerosolized by air impact, have been reported and LDPIs are considered an attractive option for the pulmonary administration of biopharmaceuticals. However, desirable disintegration and aerosolization properties have been unavailable in high-dose formulations, which has been a critical issue. This study aimed to investigate high-dose LDPIs and their optimization. In the present study, lysozyme (Lysoz) was used as a stable model protein and formulated with various amino acids. Furthermore, response surface methodology (RSM) and time-of-flight measurement were applied for efficient optimization. Superior disintegration and aerosolization properties were confirmed in the LDPIs with phenylalanine and leucine. RSM results revealed that 0.5 mg/vial of phenylalanine and 1.0 mg/vial of leucine are the optimal quantities for high-dose formulation. Accordingly, high-dose LDPI formulations were prepared and the maximum formulable quantity of Lysoz with acceptable inhalation performance was confirmed to be 3.0 mg/vial. The results suggest that LDPI can cover the milligram-order pulmonary administration of proteins/peptides. LDPIs are expected to have biopharmaceutical applications.

Human lung deposition data is non-mandatory for drug approval but very useful for the development of orally inhaled drug products. Lung deposition of inhaled drugs can be quantified by radionuclide imaging, for which one of the first considerations is the method used to radiolabel formulations. In this study, we report the development of a radiolabeling method for lyophilizate for dry powder inhalation (LDPI) formulations. TechneCoatTM is one method that can radiolabel drug particles without using solvents. In this method, particles are radiolabeled with a dispersion of 99mTc-labeled nanoparticles called TechnegasTM. Because a LDPI formulation is not comprised of particles but is a lyophilized cake aerosolized by air impact, the TechneCoat method cannot be used for the radiolabeling of LDPI formulations. We therefore modified the TechneCoat apparatus so that LDPI formulations were not aerosolized by the Technegas flow. Radiolabeling using a modified TechneCoat apparatus was validate...