Thanks for the quick reply! I tried using the neon fx again using the unofficial v3.0.2 build, however, im still having the same issues, the whole canvas is painted white.
I’ve tested with the same version of Aseprite, OS and the extension and wasn’t able to reproduce the issue. You might want to try the v4.0.0 update and see if this one helps.
The newest Aseprite version (v1.3.8) changed how Magic Wand works and the implementation that I used for selecting image mask stopped working. I just pushed an update to v3.0.1 for this extension that should fix it ✌️
It’s a specific algorithm for a cheap, non-destructive rotation of an image. It’s a fairly old algorithm, I added it as it produces rather unique results.
Just wanted to say that I really appreciate all of the scripts you've made and distributed for free - as well as continue to update over time. I especially use the brush transformation script a TON, and I'm excited to try out your other scripts like this FX one! People like you make the community more awesome! :)
Hi, I'm using v1.3.6 on linux and after adding this plugins to the script folder I cannot get it working. I just click on the script and nothing happens, I'm not really sure if I need to do anything else or if its just an issue with this version
first of all thanks for making such a perfect plugin! could you post the details of the maths behind the parallax layer speeds please? im trying to figure out how to balance layers so everything comes back to the same starting point, but ive not worked out how the speeds and the image size need to divide to make this happen.
It works exactly as you described, I’m working on an update that’s going to introduce an alternate mode where you can input speed of a layer directly - it looks like I overcomplicated it a bit with the “distance”. ✌
Sure, for the start you’ll need an Aseprite file with multiple layers, it can have multiple frames as well if you want some (or all) of your layers to be animated.
Then you got to the Edit > FX > Parallax and a new window pops up, there you can see a list of all of your layers. Each one of them has a Distance value specified, just as in real life - layers that are further away (higher distance value) move slower than the layers that are closer (smaller distance value).
Note that layers with their Distance set to 0 will stay static and won’t move at all.
To change how fast, and in what directions the layers will move in the generated animation, there are two values for Speed in the Movement section.
You can see how layers will align in motion by moving the Shift slider in the Preview section.
Finally, you can specify how many frames do you want to generate in the output animation, currently, there’s no option to generate perfect loops automatically but it is planned for the future.
All of this is shown in the last image from the description, if you’d have any further questions - let me know. ✌️
I have a problem with Parallax. I made a drawing with several layers and tested the effect to see how it looked. I closed the new sprite without saving and made some changes to the drawings and recreated the effect. When I run the effect, the layers it shows me are two different (the changed one and the one before the change) making it look weird, like for example one of the layers gives a jump (I lowered it a little to make it look better) or a mountain looks without shadows (previous version) and continues with the shadows and starts again. What do I do?
"5. Generate the Parallax FX (incorrectly, the result uses old version of layers from the original sprite)"
Uses the old and new version of the layer. Both two. It puts it one after the other. I believe the rest of the steps are correct.
In fact, I close Aseprite, open it again, try again and I get the same error. Restarting the PC as well.
Also, I copy the layers into a new document and try the effect and I still get the same error. It is as if the layers themselves keep a history of changes.
If someone has the same problem, just trimming the canvas, checking "Trim content outside the canvas", will solve it. It seems that in the process something similar to the "tiles" option was created (or maybe I did it unintentionally).
anytime i try to open up the aseprite extension file. it gives me an error. can you please help me? (this is my first time trying to import one of your tools)
the error just says it can't load the path of where the aseprite extension file is, idk if you're supposed to put the file in the scripts folder and run it
You shouldn’t need to put the file in the scripts folder.
It does sound like a file access issue, can you load any other files into Aseprite that are on the same drive or in the same folder as the extension file?
Just routinely I’ll ask as well - what Aseprite version and OS version are you running?
If I understand correctly, you cannot access any other file in the same place as the extension file. This would point to this definitely being a file access/permissions issue.
You should try moving it to a different place, or change the permissions of the file so it’s executable by the current user.
Of course, could you provide some more information? What are the steps that you’re trying? Does the extension appear in the Extensions tab in Preferences? Do you get any kind of error message?
Hello!
I tried out v1.0.0, and it didn’t seem to work.
When I disabled and enabled the extension, it said that there was a unexpected < in the extension.lua file at line 6. So I removed the <const> from both lines and that made it work.
I’m running aseprite 1.3-beta6. Maybe it has a different lua version?
← Return to extension
Comments
Log in with itch.io to leave a comment.
Hello! With the new Aseprite v1.3.9, the neon effect fills the entire canvas with a solid white colour. Does anyone know a fix around this? Thanks!
You can try the unofficial v3.0.2 build of the extension. It should help, especially if you’re running Aseprite on macOS.
Thanks for the quick reply! I tried using the neon fx again using the unofficial v3.0.2 build, however, im still having the same issues, the whole canvas is painted white.
I’ll need to check the build again, what OS are you using?
Im using windows 11, and im running aseprite through steam
I’ve tested with the same version of Aseprite, OS and the extension and wasn’t able to reproduce the issue. You might want to try the v4.0.0 update and see if this one helps.
Hi, it appear that the latest aseprite update broke the neon effect, the color fill the entire screen when applied..
Does anyone has the same issue?
The newest Aseprite version (v1.3.8) changed how Magic Wand works and the implementation that I used for selecting image mask stopped working. I just pushed an update to v3.0.1 for this extension that should fix it ✌️
How exactly do I use the LCD effect? The scanlines don't really look like scanlines, and I have to manually move the overlays
Nvm I figured it out, but what is "three shear rotation"?
It’s a specific algorithm for a cheap, non-destructive rotation of an image. It’s a fairly old algorithm, I added it as it produces rather unique results.
the idea was shared somewhat recently in indie/low-rez gamedev circles! https://cohost.org/tomforsyth/post/891823-rotation-with-three
Hi, what's the license?
Hi, all of my extensions are under CC0, though I don’t think it’s specified anywhere publicly and I need to fix that. ✌️
Hello, I was wondering how to activate the glow?
The glow is the Neon effect that can be found under the Edit > FX > Neon, after installing the extension.
Just wanted to say that I really appreciate all of the scripts you've made and distributed for free - as well as continue to update over time. I especially use the brush transformation script a TON, and I'm excited to try out your other scripts like this FX one! People like you make the community more awesome! :)
Hi, I'm using v1.3.6 on linux and after adding this plugins to the script folder I cannot get it working. I just click on the script and nothing happens, I'm not really sure if I need to do anything else or if its just an issue with this version
Aseprite should install these into the ‘extensions’ directory that it’s using. Running these as scripts won’t work.
You can try opening the extension files using Aseprite, this should make it install the extension correctly.
Thanks a lot, now it works.
Great, I’m glad! ✌️
¡Muchas gracias por estos plugins¡ Son de mucha ayuda y de verdad se agradece.
✌️
first of all thanks for making such a perfect plugin! could you post the details of the maths behind the parallax layer speeds please? im trying to figure out how to balance layers so everything comes back to the same starting point, but ive not worked out how the speeds and the image size need to divide to make this happen.
i think ive got it. is it: (global speed) ÷ (local speed) = pixels moved per frame?
It works exactly as you described, I’m working on an update that’s going to introduce an alternate mode where you can input speed of a layer directly - it looks like I overcomplicated it a bit with the “distance”. ✌
I'm a bit confused about using parallax. Can you explain it a bit more?
Sure, for the start you’ll need an Aseprite file with multiple layers, it can have multiple frames as well if you want some (or all) of your layers to be animated.
Then you got to the Edit > FX > Parallax and a new window pops up, there you can see a list of all of your layers. Each one of them has a Distance value specified, just as in real life - layers that are further away (higher distance value) move slower than the layers that are closer (smaller distance value). Note that layers with their Distance set to 0 will stay static and won’t move at all.
To change how fast, and in what directions the layers will move in the generated animation, there are two values for Speed in the Movement section.
You can see how layers will align in motion by moving the Shift slider in the Preview section.
Finally, you can specify how many frames do you want to generate in the output animation, currently, there’s no option to generate perfect loops automatically but it is planned for the future.
All of this is shown in the last image from the description, if you’d have any further questions - let me know. ✌️
Hi! I have a problem with installing. I use Steam the last version and a Windows 10. This appears when I doubleclick the extension file.
I have a problem with Parallax. I made a drawing with several layers and tested the effect to see how it looked. I closed the new sprite without saving and made some changes to the drawings and recreated the effect. When I run the effect, the layers it shows me are two different (the changed one and the one before the change) making it look weird, like for example one of the layers gives a jump (I lowered it a little to make it look better) or a mountain looks without shadows (previous version) and continues with the shadows and starts again. What do I do?
I’ll investigate this issue, sounds odd as Parallax doesn’t hold any data, especially not previous versions of the sprite. 🤔
I’ll see if I can reproduce this, could you confirm the steps are:
"5. Generate the Parallax FX (incorrectly, the result uses old version of layers from the original sprite)"
Uses the old and new version of the layer. Both two. It puts it one after the other. I believe the rest of the steps are correct.
In fact, I close Aseprite, open it again, try again and I get the same error. Restarting the PC as well.
Also, I copy the layers into a new document and try the effect and I still get the same error. It is as if the layers themselves keep a history of changes.
(Maybe I can send you both documents? The Aseprite one and the parallax effect one)
That would be very helpful, you can DM me on Twitter or email me at kac.wozniak[at]gmail.com.
PROBLEM SOLVED! (Thanks Kacper =D)
If someone has the same problem, just trimming the canvas, checking "Trim content outside the canvas", will solve it. It seems that in the process something similar to the "tiles" option was created (or maybe I did it unintentionally).
You're a living legend Kacper!
That’s way too kind, thank you ✌️
anytime i try to open up the aseprite extension file. it gives me an error. can you please help me? (this is my first time trying to import one of your tools)
Could you provide what the text of the error is? Or perhaps a screenshot of it?
the error just says it can't load the path of where the aseprite extension file is, idk if you're supposed to put the file in the scripts folder and run it
You shouldn’t need to put the file in the scripts folder.
It does sound like a file access issue, can you load any other files into Aseprite that are on the same drive or in the same folder as the extension file?
Just routinely I’ll ask as well - what Aseprite version and OS version are you running?
1. No, I cannot
2. I think i run on the newest version of aseprite and I'm on windows 11.
If I understand correctly, you cannot access any other file in the same place as the extension file. This would point to this definitely being a file access/permissions issue.
You should try moving it to a different place, or change the permissions of the file so it’s executable by the current user.
LCD Screen saves me a lot of work. Thank you so much for creating such cool extensions.
Hello! I can't add this plugin. I've already tried everything, but it doesn't install. Can you help me?
Of course, could you provide some more information? What are the steps that you’re trying? Does the extension appear in the Extensions tab in Preferences? Do you get any kind of error message?
I duble clicked icon FX.aseprite-extension and select Install and click OK and after that I restart Aseprite, but it doesn't appear.
Yes, it appears in the Extensions, but it doesn't appear in Edit > FX so that I can use it.
It sounds similar to an issue that others reported, you might find some help in this thread, summarised in this tweet, as well as this one.
Let me know if any of these help your situation.
Awesome stuff as always 🙂
Thank you, that means a lot! ✌️
You rock Kacper.
I second that. :)
Thank you both! 🥲
Hello! I tried out v1.0.0, and it didn’t seem to work. When I disabled and enabled the extension, it said that there was a unexpected < in the extension.lua file at line 6. So I removed the <const> from both lines and that made it work. I’m running aseprite 1.3-beta6. Maybe it has a different lua version?
The extension was tested with version 1.2.35, that’s interesting that the beta branch doesn’t support the const tag.
Thank you for reporting this issue, I’ll look into it as I don’t currently know if and how the beta branch differs in it’s Lua interpretation.
more super cool and nifty tools!
thank you for making and sharing all of these!
You’re welcome ✌️