Module: MINIO

Pigsty has built-in MinIO support. MinIO is an S3 OSS alternative which is used as an optional PostgreSQL backup repo

Module:

MINIO

Categories:

Min.IO: S3-Compatible Open-Source Multi-Cloud Object Storage

Configuration | Administration | Playbook | Dashboard | Parameter

MinIO is an S3-compatible object storage server. It’s designed to be scalable, secure, and easy to use. It has native multi-node multi-driver HA support and can store documents, pictures, videos, and backups.

Pigsty uses MinIO as an optional PostgreSQL backup storage repo, in addition to the default local posix FS repo. If the MinIO repo is used, the MINIO module should be installed before any PGSQL modules.

MinIO requires a trusted CA to work, so you have to install it in addition to NODE module.

Beware than MinIO mandates HTTPS access, so please ensure that the MinIO service domain (default to sss.pigsty) correctly points to the MinIO server node:

You can ask your SA to add a DNS record in the intranet DNS server
If you enable the DNS server on the Infra node, you can add records in dns_records
You can also add static resolution records to all nodes in node_etc_hosts

Example: prod.yml

Configuration

You have to define a MinIO cluster before deploying it. There are some parameters for MinIO.

Single-Node Single-Drive

Reference: deploy-minio-single-node-single-drive

To define a singleton MinIO instance, it’s straightforward:

# 1 Node 1 Driver (DEFAULT)
minio: { hosts: { 10.10.10.10: { minio_seq: 1 } }, vars: { minio_cluster: minio } }

The only required params are minio_seq and minio_cluster, which generate a unique identity for each MinIO instance.

Single-Node Single-Driver mode is for development purposes, so you can use a common dir as the data dir, which is /data/minio by default. Beware that in multi-driver or multi-node mode, MinIO will refuse to start if using a common dir as the data dir rather than a mount point.

Single-Node Multi-Drive

Reference: deploy-minio-single-node-multi-drive

To use multiple disks on a single node, you have to specify the minio_data in the format of {{ prefix }}{x...y}, which defines a series of disk mount points.

minio:
  hosts: { 10.10.10.10: { minio_seq: 1 } }
  vars:
    minio_cluster: minio         # minio cluster name, minio by default
    minio_data: '/data{1...4}'   # minio data dir(s), use {x...y} to specify multi drivers

This example defines a single-node MinIO cluster with 4 drivers: /data1, /data2, /data3, /data4. You have to mount them properly before launching MinIO:

mkfs.xfs /dev/sdb; mkdir /data1; mount -t xfs /dev/sdb /data1;   # mount 1st driver, ...

Multi-Node Multi-Drive

Reference: deploy-minio-multi-node-multi-drive

The extra minio_node param will be used for a multi-node deployment:

minio:
  hosts:
    10.10.10.10: { minio_seq: 1 }
    10.10.10.11: { minio_seq: 2 }
    10.10.10.12: { minio_seq: 3 }
  vars:
    minio_cluster: minio
    minio_data: '/data{1...2}'                         # use two disk per node
    minio_node: '${minio_cluster}-${minio_seq}.pigsty' # minio node name pattern

The ${minio_cluster} and ${minio_seq} will be replaced with the value of minio_cluster and minio_seq respectively and used as MinIO nodename.

Expose Service

MinIO will serve on port 9000 by default. If a multi-node MinIO cluster is deployed, you can access its service via any node. It would be better to expose MinIO service via a load balancer, such as the default haproxy on NODE, or use the L2 vip.

To expose MinIO service with haproxy, you have to define an extra service with haproxy_services:

minio:
  hosts:
    10.10.10.10: { minio_seq: 1 , nodename: minio-1 }
    10.10.10.11: { minio_seq: 2 , nodename: minio-2 }
    10.10.10.12: { minio_seq: 3 , nodename: minio-3 }
  vars:
    minio_cluster: minio
    node_cluster: minio
    minio_data: '/data{1...2}'         # use two disk per node
    minio_node: '${minio_cluster}-${minio_seq}.pigsty' # minio node name pattern
    haproxy_services:                  # EXPOSING MINIO SERVICE WITH HAPROXY
      - name: minio                    # [REQUIRED] service name, unique
        port: 9002                     # [REQUIRED] service port, unique
        options:                       # [OPTIONAL] minio health check
          - option httpchk
          - option http-keep-alive
          - http-check send meth OPTIONS uri /minio/health/live
          - http-check expect status 200
        servers:
          - { name: minio-1 ,ip: 10.10.10.10 ,port: 9000 ,options: 'check-ssl ca-file /etc/pki/ca.crt check port 9000' }
          - { name: minio-2 ,ip: 10.10.10.11 ,port: 9000 ,options: 'check-ssl ca-file /etc/pki/ca.crt check port 9000' }
          - { name: minio-3 ,ip: 10.10.10.12 ,port: 9000 ,options: 'check-ssl ca-file /etc/pki/ca.crt check port 9000' }

Access Service

To use the exposed service, you have to update/append the MinIO credential in the pgbackrest_repo section:

# This is the newly added HA MinIO Repo definition, USE THIS INSTEAD!
minio_ha:
  type: s3
  s3_endpoint: minio-1.pigsty   # s3_endpoint could be any load balancer: 10.10.10.1{0,1,2}, or domain names point to any of the 3 nodes
  s3_region: us-east-1          # you could use external domain name: sss.pigsty , which resolve to any members  (`minio_domain`)
  s3_bucket: pgsql              # instance & nodename can be used : minio-1.pigsty minio-1.pigsty minio-1.pigsty minio-1 minio-2 minio-3
  s3_key: pgbackrest            # Better using a new password for MinIO pgbackrest user
  s3_key_secret: S3User.SomeNewPassWord
  s3_uri_style: path
  path: /pgbackrest
  storage_port: 9002            # Use the load balancer port 9002 instead of default 9000 (direct access)
  storage_ca_file: /etc/pki/ca.crt
  bundle: y
  cipher_type: aes-256-cbc      # Better using a new cipher password for your production environment
  cipher_pass: pgBackRest.With.Some.Extra.PassWord.And.Salt.${pg_cluster}
  retention_full_type: time
  retention_full: 14

Expose Admin

MinIO will serve an admin web portal on port 9001 by default.

It’s not wise to expose the admin portal to the public, but if you wish to do so, add MinIO to the infra_portal and refresh the nginx server:

infra_portal:   # domain names and upstream servers
  # ...         # MinIO admin page require HTTPS / Websocket to work
  minio1       : { domain: sss.pigsty  ,endpoint: 10.10.10.10:9001 ,scheme: https ,websocket: true }
  minio2       : { domain: sss2.pigsty ,endpoint: 10.10.10.11:9001 ,scheme: https ,websocket: true }
  minio3       : { domain: sss3.pigsty ,endpoint: 10.10.10.12:9001 ,scheme: https ,websocket: true }

Check the MinIO demo config and special Vagrantfile for more details.

Administration

Here are some common MinIO mcli commands for reference, check MinIO Client for more details.

Create Cluster

To create a defined minio cluster, run the minio.yml playbook on minio group:

./minio.yml -l minio   # install minio cluster on group 'minio'

Client Setup

To access MinIO servers, you have to configure client mcli alias first:

mcli alias ls  # list minio alias (there's a sss by default)
mcli alias set sss https://sss.pigsty:9000 minioadmin minioadmin              # root user
mcli alias set pgbackrest https://sss.pigsty:9000 pgbackrest S3User.Backup    # backup user

You can manage business users with mcli as well:

mcli admin user list sss     # list all users on sss
set +o history # hide password in history and create minio user
mcli admin user add sss dba S3User.DBA
mcli admin user add sss pgbackrest S3User.Backup
set -o history

CRUD

You can CRUD minio bucket with mcli:

mcli ls sss/          # list buckets of alias 'sss'
mcli mb --ignore-existing sss/hello  # create a bucket named 'hello'
mcli rb --force sss/hello            # remove bucket 'hello' with force

Or perform object CRUD:

mcli cp -r /www/pigsty/*.rpm sss/infra/repo/         # upload files to bucket 'infra' with prefix 'repo'
mcli cp sss/infra/repo/pg_exporter-0.5.0.x86_64.rpm /tmp/  # download file from minio to local

Playbook

There’s a built-in playbook: minio.yml for installing the MinIO cluster. But you have to define it first.

`minio.yml`

minio.yml

minio-id : generate minio identity
minio_os_user : create os user minio
minio_install : install minio/mcli rpm
minio_clean : remove minio data (not default)
minio_dir : create minio directories
minio_config : generate minio config
- minio_conf : minio main config
- minio_cert : minio ssl cert
- minio_dns : write minio dns records
minio_launch : launch minio service
minio_register : register minio to prometheus
minio_provision : create minio aliases/buckets/users
- minio_alias : create minio client alias
- minio_bucket : create minio buckets
- minio_user : create minio biz users

Trusted ca file: /etc/pki/ca.crt should exist on all nodes already. which is generated in role: ca and loaded & trusted by default in role: node.

You should install MINIO module on Pigsty-managed nodes (i.e., Install NODE first)

Dashboard

There are two dashboards for MINIO module.

MinIO Overview: Overview of one single MinIO cluster

MinIO Instance: Detail information about one single MinIO instance

Parameter

There are 15 parameters in MINIO module.

Parameter	Type	Level	Comment
`minio_seq`	int	I	minio instance identifier, REQUIRED
`minio_cluster`	string	C	minio cluster name, minio by default
`minio_clean`	bool	G/C/A	cleanup minio during init?, false by default
`minio_user`	username	C	minio os user, `minio` by default
`minio_node`	string	C	minio node name pattern
`minio_data`	path	C	minio data dir(s), use {x…y} to specify multi drivers
`minio_domain`	string	G	minio external domain name, `sss.pigsty` by default
`minio_port`	port	C	minio service port, 9000 by default
`minio_admin_port`	port	C	minio console port, 9001 by default
`minio_access_key`	username	C	root access key, `minioadmin` by default
`minio_secret_key`	password	C	root secret key, `minioadmin` by default
`minio_extra_vars`	string	C	extra environment variables for minio server
`minio_alias`	string	G	alias name for local minio deployment
`minio_buckets`	bucket[]	C	list of minio bucket to be created
`minio_users`	user[]	C	list of minio user to be created

#minio_seq: 1                     # minio instance identifier, REQUIRED
minio_cluster: minio              # minio cluster name, minio by default
minio_clean: false                # cleanup minio during init?, false by default
minio_user: minio                 # minio os user, `minio` by default
minio_node: '${minio_cluster}-${minio_seq}.pigsty' # minio node name pattern
minio_data: '/data/minio'         # minio data dir(s), use {x...y} to specify multi drivers
minio_domain: sss.pigsty          # minio external domain name, `sss.pigsty` by default
minio_port: 9000                  # minio service port, 9000 by default
minio_admin_port: 9001            # minio console port, 9001 by default
minio_access_key: minioadmin      # root access key, `minioadmin` by default
minio_secret_key: minioadmin      # root secret key, `minioadmin` by default
minio_extra_vars: ''              # extra environment variables
minio_alias: sss                  # alias name for local minio deployment
minio_buckets: [ { name: pgsql }, { name: infra },  { name: redis } ]
minio_users:
  - { access_key: dba , secret_key: S3User.DBA, policy: consoleAdmin }
  - { access_key: pgbackrest , secret_key: S3User.Backup, policy: readwrite }

Metrics

Pigsty MINIO module metric list

FAQ

Pigsty MINIO module frequently asked questions

Feedback

Was this page helpful?

Glad to hear it! Please tell us how we can improve.

Sorry to hear that. Please tell us how we can improve.

Last modified 2024-08-13: adjust config template links (dd2cb5b0)