[go: up one dir, main page]

Ding et al., 2008 - Google Patents

Slip casting combined with colloidal spray coating in fabrication of tubular anode-supported solid oxide fuel cells

Ding et al., 2008

Document ID
392394324989457971
Author
Ding J
Liu J
Yuan W
Zhang Y
Publication year
Publication venue
Journal of the European Ceramic Society

External Links

Snippet

A simple and cost-effective slip casting technique was successfully developed to fabricate NiO–YSZ anode substrates for tubular anode-supported single SOFCs. An YSZ electrolyte film was coated on the anode substrates by colloidal spray coating technique. A single cell …
Continue reading at www.sciencedirect.com (other versions)

Classifications

    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02E—REDUCTION OF GREENHOUSE GASES [GHG] EMISSION, RELATED TO ENERGY GENERATION, TRANSMISSION OR DISTRIBUTION
    • Y02E60/00—Enabling technologies or technologies with a potential or indirect contribution to GHG emissions mitigation
    • Y02E60/50—Fuel cells
    • Y02E60/52—Fuel cells characterised by type or design
    • Y02E60/521—Proton Exchange Membrane Fuel Cells [PEMFC]
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02E—REDUCTION OF GREENHOUSE GASES [GHG] EMISSION, RELATED TO ENERGY GENERATION, TRANSMISSION OR DISTRIBUTION
    • Y02E60/00—Enabling technologies or technologies with a potential or indirect contribution to GHG emissions mitigation
    • Y02E60/50—Fuel cells
    • Y02E60/52—Fuel cells characterised by type or design
    • Y02E60/525—Solid Oxide Fuel Cells [SOFC]
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M4/00—Electrodes
    • H01M4/86—Inert electrodes with catalytic activity, e.g. for fuel cells
    • H01M4/88—Processes of manufacture
    • H01M4/8878—Treatment steps after deposition of the catalytic active composition or after shaping of the electrode being free-standing body
    • H01M4/8882—Heat treatment, e.g. drying, baking
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M8/00—Fuel cells; Manufacture thereof
    • H01M8/10—Fuel cells with solid electrolytes
    • H01M8/12—Fuel cells with solid electrolytes operating at high temperature, e.g. with stabilised ZrO2 electrolyte
    • H01M8/1213—Fuel cells with solid electrolytes operating at high temperature, e.g. with stabilised ZrO2 electrolyte characterised by the electrode/electrolyte combination or the supporting material
    • H01M8/1226—Fuel cells with solid electrolytes operating at high temperature, e.g. with stabilised ZrO2 electrolyte characterised by the electrode/electrolyte combination or the supporting material characterised by the supporting layer
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02E—REDUCTION OF GREENHOUSE GASES [GHG] EMISSION, RELATED TO ENERGY GENERATION, TRANSMISSION OR DISTRIBUTION
    • Y02E60/00—Enabling technologies or technologies with a potential or indirect contribution to GHG emissions mitigation
    • Y02E60/10—Energy storage
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M8/00—Fuel cells; Manufacture thereof
    • H01M8/10—Fuel cells with solid electrolytes
    • H01M8/12—Fuel cells with solid electrolytes operating at high temperature, e.g. with stabilised ZrO2 electrolyte
    • H01M8/124—Fuel cells with solid electrolytes operating at high temperature, e.g. with stabilised ZrO2 electrolyte characterised by the process of manufacturing or by the material of the electrolyte
    • H01M8/1246—Fuel cells with solid electrolytes operating at high temperature, e.g. with stabilised ZrO2 electrolyte characterised by the process of manufacturing or by the material of the electrolyte the electrolyte consisting of oxides
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M8/00—Fuel cells; Manufacture thereof
    • H01M8/02—Details
    • H01M8/0202—Collectors; Separators, e.g. bipolar separators; Interconnectors
    • H01M8/023—Porous and characterised by the material
    • H01M8/0241—Composites
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M4/00—Electrodes
    • H01M4/86—Inert electrodes with catalytic activity, e.g. for fuel cells
    • H01M4/8605—Porous electrodes
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M4/00—Electrodes
    • H01M4/86—Inert electrodes with catalytic activity, e.g. for fuel cells
    • H01M4/90—Selection of catalytic material
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02E—REDUCTION OF GREENHOUSE GASES [GHG] EMISSION, RELATED TO ENERGY GENERATION, TRANSMISSION OR DISTRIBUTION
    • Y02E10/00—Energy generation through renewable energy sources
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M8/00—Fuel cells; Manufacture thereof
    • H01M8/24—Grouping of fuel cells, e.g. stacking of fuel cells
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M2300/00—Electrolytes
    • H01M2300/0017—Non-aqueous electrolytes

Similar Documents

Publication Publication Date Title
Xu et al. YSZ thin films deposited by spin-coating for IT-SOFCs
Yoon et al. Performance of anode-supported solid oxide fuel cell with La0. 85Sr0. 15MnO3 cathode modified by sol–gel coating technique
Ding et al. An anode-supported solid oxide fuel cell with spray-coated yttria-stabilized zirconia (YSZ) electrolyte film
Chen et al. Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells
Chen et al. Fabrication and performance of anode-supported YSZ films by slurry spin coating
Jin et al. Electrochemical properties analysis of tubular NiO–YSZ anode-supported SOFCs fabricated by the phase-inversion method
Bao et al. Effect of NiO/YSZ compositions on the co-sintering process of anode-supported fuel cell
Liu et al. Fabrication and characterization of micro-tubular cathode-supported SOFC for intermediate temperature operation
Yamaguchi et al. Fabrication and characterization of high performance cathode supported small-scale SOFC for intermediate temperature operation
Ding et al. Slip casting combined with colloidal spray coating in fabrication of tubular anode-supported solid oxide fuel cells
Zunic et al. Anode supported protonic solid oxide fuel cells fabricated using electrophoretic deposition
Heo et al. Redox-induced performance degradation of anode-supported tubular solid oxide fuel cells
Han et al. Electrochemical properties of tubular SOFC based on a porous ceramic support fabricated by phase-inversion method
Bai et al. Dip coating technique in fabrication of cone-shaped anode-supported solid oxide fuel cells
Zhou et al. Microstructure and electrochemical characterization of solid oxide fuel cells fabricated by co-tape casting
Ding et al. Fabrication and characterization of low-temperature SOFC stack based on GDC electrolyte membrane
Ai et al. Preparation of Sm0. 2Ce0. 8O1. 9 membranes on porous substrates by a slurry spin coating method and its application in IT-SOFC
Zunic et al. Electrophoretic deposition of dense BaCe0. 9Y0. 1O3− x electrolyte thick-films on Ni-based anodes for intermediate temperature solid oxide fuel cells
KR101179130B1 (en) Segment-in-series type sofc sub-module, preparation method thereof and segment-in-series type sofc module using the same
Liu et al. Dip-coating and co-sintering technologies for fabricating tubular solid oxide fuel cells
Zhang et al. Production of dense yttria-stabilized zirconia thin films by dip-coating for IT-SOFC application
Kim et al. Fabrication and operating characteristics of a flat tubular segmented-in-series solid oxide fuel cell unit bundle
Mushtaq et al. Effect of cathode geometry on the electrochemical performance of flat tubular segmented-in-series (SIS) solid oxide fuel cell
Shi et al. High performance tubular solid oxide fuel cells with BSCF cathode
Xue et al. Fabrication of porous anode-support for planar solid oxide fuel cell using fish oil as a pore former