[go: up one dir, main page]

Horne et al., 1960 - Google Patents

Studies of the retardation force developed on an aircraft tire rolling in slush or water

Horne et al., 1960

View HTML
Document ID
11482293970419345186
Author
Horne W
Joyner U
Leland T
Publication year

External Links

Snippet

SUMMARY A series of unbraked (freely rolling) taxi tests were conducted at the Langley landing-loads track with a 32 x 8.8, type VII, 22-ply-rating ribbed-tread aircraft tire to obtain data on tire retardation forces developed during rolling in both slush and water. The forward …
Continue reading at books.google.com (HTML) (other versions)

Similar Documents

Publication Publication Date Title
Horne et al. Studies of the retardation force developed on an aircraft tire rolling in slush or water
Sugano et al. Full-scale aircraft impact test for evaluation of impact force
Horne Influence of the Tire Tread Pattern and Runway Surface Condition on Breaking Friction and Rolling Resistance of a Modern Aircraft Tire: Walter B. Horne and Trafford JW Leland
Leland et al. Effects of pavement texture on wet-runway braking performance
Makkonen et al. Experiments on the cloud droplet collision efficiency of cylinders
Vergeiner et al. The dynamic structure of lee wave flow as obtained from balloon and airplane observations
Farmer A two-degree-of-freedom flutter mount system with low damping for testing rigid wings at different angles of attack
Von Riesemann et al. Full-scale aircraft impact test for evaluation of impact forces: Part 1, Test plan, test method, and test results
Leland et al. An investigation of the influence of aircraft tire-tread wear on wet-runway braking
Dreher et al. Ground-run tests with a bogie landing gear in water and slush
Yager et al. Friction characteristics of three 30 by 11.5-14.5, type 8, aircraft tires with various tread groove patterns and rubber compounds
Dreher et al. Coefficients of friction and wear characteristics for skids made of various metals on concrete, asphalt, and lakebed surfaces
Pytka et al. Soil stress and deformation determination under a landing airplane on an unsurfaced airfield
Byrdsong et al. Investigation of Aircraft Tire Damage Resulting From Touchdown on Grooved Runway Surfaces
Daugherty et al. Spin-up studies of the space shuttle orbiter main gear tire
Bidwell State-of-the-Art—Vehicle Control and Road Holding
Merritt Concorde landing requirement evaluation tests
Torda et al. Aerodynamic design of a Land Speed Record car
McCarty Effects of runway grooving on aircraft tire spin-up behavior
Leland An evaluation of some unbraked tire cornering force characteristics
Horne Experimental investigation of spin-up friction coefficients on concrete and nonskid carrier-deck surfaces
Heffelfinger et al. Full-Scale Aircraft Impact Test for Evaluation of Impact Forces Part 1: Test Plan, Test Method, and Test Results
Matheny Comparison between calculated and measured loads on wing and horizontal tail in pull-up maneuvers
Larson Statistical analysis of landing contact conditions for three lifting body research vehicles
Yager et al. Traction Characteristics of a 30 by 11.5-14.5, Type 8, Aircraft Tire on Dry, Wet and Flooded Surfaces