【物品用途】;本創作係為一彎管器之新式樣設計。【創作特點】;如圖所示，本創作係為一安裝於彎管器之對柄造型設計，而由所附參考圖、立體圖、前、左側視圖觀之，該對柄大體上係呈八字狀之上下微彎曲之長柄形狀，並依序呈前後上下平行排列地啣接於彎管器之前上(簡稱上柄)及右側下(簡稱下柄)方處，而該上柄左側嵌接一呈略似半圓凹槽狀之軸承部件，而該部件頂部呈凹口狀設計，而上柄右側尾部呈現出向上微彎形狀，並於尾端套接一長形鞘柄，另下柄左側前端較右側尾部粗，並嵌接一方體部件，而該部件前側向上延伸形成輪軸狀，並與上柄銜接之軸承部件呈疊置設計，而尾部呈向下微彎形狀，且亦於尾端套接一長形鞘柄，並與上柄呈相互對應，具立體層次感。整體而言，本創作造型簡潔美觀且式樣新穎具獨創性，實為一特殊且實用之新式樣設計。;上述說明僅供輔助瞭解本創作而非用以限制其內容；理應明瞭，新式樣係就其整體形狀、花紋或色彩指定之，且係以申請專利範圍所界定者為準。[Item Usage]: This creation is a new style design of a tube bender. [Creation Features]: As shown in the figure, this creation is a pair of handles designed to be installed on the tube bender. From the attached reference diagram, three-dimensional diagram, front and left side views, the pair of handles are generally in the shape of long handles that are slightly bent up and down in an eight-shaped shape, and are connected to the front upper (referred to as the upper handle) and the lower right side (referred to as the lower handle) of the tube bender in a parallel arrangement in sequence. The left side of the upper handle is embedded with a bearing component that is slightly like a semicircular groove. , and the top of the component is designed in a notch shape, and the right tail of the upper handle is slightly bent upward, and a long sheath handle is sleeved at the tail end. The front end of the left side of the lower handle is thicker than the right tail, and is embedded with a square component. The front side of the component extends upward to form an axle shape, and the bearing component connected to the upper handle is designed in a stacked design, and the tail is slightly bent downward, and a long sheath handle is also sleeved at the tail end, and it corresponds to the upper handle, with a three-dimensional sense of hierarchy. Overall, this creation is simple and beautiful in shape, novel in style and original, and is indeed a special and practical new style design. ;The above description is only used to assist in understanding the present creation and is not intended to limit its content; it should be understood that the new style is specified in terms of its overall shape, pattern or color, and is subject to the scope of the patent application.