411314 五、發明說明（υ 本發明係 使其塑膠製品 法者。 - 有關於一種令塑膠製品可產 之顏色為同一色系或不同色 生多色 系的漸 彩表現， 層色之製 氺本發 由 看之下 視為裝 令使用 鑑 系使用 明人對 設計， ，於是 氺本發 明之背景技俩 一眼望去到處 覺得它 的話， 看，根 之說明 本 第 ，並不 飾用品 者只能 於上述 ，未能 目前單 盼能將 有本發 明之目 發明之 本發明 攪拌、 機之噴 出一有 完時， 塑料， 入模具 與（Β (A ) 及其所產 所林立的 的顏色太 實在配不 本不能派 ，可以得 完全使用在一系 色系的塑膠製 調之塑膠 生。 顏色單 明之產 的 主要目 其係以 加熱， 頭裝置 色塑膠 即更換 再經由 内時， )色之 色塑膠 的、 定量 使（ ， 而 製品 與（ 攪拌 新塑 塑料 塑膠 特點 定色 A ) (A ，然 A ) 、-加 料則 容積 製品 生之問題點 塑膠製品全 單調，但若 上，甚者更 上用場，難 知現行塑膠 列的漸層色 品之缺點， 製品不盡理 功效， 之（A 色塑料 )色塑 當定量 色塑料 熱后， 流動在 比率逐 之另一 於下 )色 炼融 料進 (A 不同 使混 中間 漸改 漸層 是單一 色系，乍 塑膠製品 體美感， 欲將其 破壞整 以具有實用性。 製品均是單一色 系中，故，本發 乃潛心研究改良 想之處加以排除 列詳細 塑料為 ，進入 入模具 )色塑 之（B 合后之 ，並使 變，則 色之塑 說明： 主，經由 射出成型 中，注塑 料接近用 )色定量 塑料再注 (A )色 注塑出與 膠製品。411314 V. Description of the invention (υ This invention refers to the law of making plastic products.-Regarding a kind of gradual color expression that makes the colors that plastic products can produce be the same color system or different colors and multi-color systems, the production of layer color From the point of view, it is regarded as a pretend use of the design system, so if you look at the background techniques of the present invention at a glance and feel it everywhere, look at the roots to explain the basics, and those who do not decorate can only Based on the above, it is not currently hoped that the present invention, which has the purpose of the present invention, can be stirred and sprayed out. When the plastic is poured into the mold and the color of (B (A) and its production is too solid) If you do n’t match it, you can use it completely. It can be used in a series of plastics made of plastic. The main purpose of the color is to heat it. When the head device is replaced with plastic, it is colored. Plastic, quantitative make (, and products and (stirring new plastic plastic characteristics fixed color A) (A, then A)),-feeding is the problem of volume products, plastic products are monotonous, but If it is above, it is even more useful. It is difficult to know the shortcomings of the gradual color of the current plastic column, and the product does not do its best. The (A color plastic) color plastic, when the quantitative color plastic is hot, flows at different rates. (1 in the next) Color smelting and melting materials (A is different, the mixing center gradually changes to a single color system. At first, plastic products have a beautiful body. I want to destroy it to have practicality. The products are in a single color system, so, This hair is the focus of research and improvement to exclude the detailed plastics, enter the mold) color plastic (after B combination, and change, then the color plastic description: Main, through injection molding, injection plastic is close to use ) Color quantitative plastic injection (A) color injection molding and plastic products.
五、發明說明（2) 第二：本發明利用漸層色的製法製出塑膠製品，令塑膠製 品解決以前單一色系的單調顏色，令塑膠製品可產 生多色彩之表現。 第三：本發明利用同一色系之不同顏色注塑出完成，使外 觀呈現漸層色調，令不同顏色之塑膠製品經由漸層 色彩之層次美飾，又可作為裝飾品。 有關本發明之其他目的及功能經配合下列圖式予以作 進一步之說明後，期能使貴審查委員有更詳細的瞭解，惟 以下所述者僅為用以解釋本發明之較佳實施例，並非企圖 據以對本發明作任何形式上之限制，是以，凡有在相同之 發明精神下所作有關本發明之任何修飾或變更，皆仍應包 括在本發明意圖保護之範疇，其中： <圖式說明> 第一圖：係本發明之製法流程表。 第二圖：係本發明射出成型機之喷頭裝置内注入（A )色與（B )色塑料混合結構示意圖。 〈圖號說明〉 1 ·喷頭裝置 2 · ( B )色塑料 1 0 * ( A )色塑料 <本發明之製法> 首先，請參閱圖一所示，本發明製法之步驟為 (一） 定量定色： 將所需之（A)色塑料10定量定色； (二） 攪拌、加熱：V. Description of the invention (2) Second: The present invention uses a gradual color manufacturing method to produce plastic products, so that the plastic products can solve the monotonous colors of a single color system in the past, so that the plastic products can produce multi-color performance. Third: The present invention uses different colors of the same color system to complete injection molding, so that the appearance of the gradation color tone, so that plastic products of different colors can be beautifully decorated through the gradation of the gradation color, and can also be used as decorations. The other objects and functions of the present invention will be further explained in conjunction with the following drawings, so as to enable your review committee to have a more detailed understanding, but the following are only used to explain the preferred embodiments of the present invention, It is not intended to limit the present invention in any form, so that any modification or change related to the present invention made in the same spirit of the invention should still be included in the scope of the present invention, in which: < Description of the drawings > The first diagram is a flow chart of the manufacturing method of the present invention. The second figure is a schematic diagram of a mixed structure of injecting (A) color and (B) color plastic into a nozzle device of an injection molding machine of the present invention. <Explanation of Drawing Numbers> 1 · Nozzle device 2 · (B) colored plastic 1 0 * (A) colored plastic < Manufacturing method of the present invention > First, please refer to FIG. 1, the steps of the manufacturing method of the present invention are as follows: ) Quantitative color fixing: Quantitative color fixing of the required (A) color plastic 10; (two) stirring and heating:
_411314_ 五、發明說明（3) 將已定量定色之（A)色塑料10經由攪拌、加熱 ，使（A)色塑料1 0熔融，進入射出成型機之喷 頭裝置1内； (三） 注塑： 將射出成型機噴頭裝置1内之（A)色塑料1 0注 入模具中，注塑出一有色塑膠製品； (四） 成品： 注塑出一有色塑膠製品； (五） 待（A )色塑料1 〇近用完； (六） 換色定量塑料： 更換與（A)色塑料10不同之（B)色塑料2 ; (七） 攪拌、加熱（B )色塑料： 再將更換與（A)色塑料10不同之（B)色塑料 2，經由攪拌、加熱，使（B )色塑料2熔融，注 入射出成型機之喷頭裝置1内，令新塑料流動在中 間； (八） （A )色與（B )色塑料混合： 使注入新的（B )色塑料2與剩餘之（A )色塑料 1 0混合至其容積比率逐漸改變（如圖二）； (九） 注塑： 將（A )色與（B )色塑料1 ◦、2混合改變后再 注入模具内，則又可注塑出與（A )色塑膠製品之 另一漸層色之塑膠製品； (十）成品：_411314_ V. Description of the invention (3) The (A) color plastic 10 that has been quantitatively fixed is stirred and heated to melt the (A) color plastic 10 and enter the nozzle device 1 of the injection molding machine; (3) injection molding : Inject the (A) colored plastic 10 in the nozzle device 1 of the injection molding machine into the mold to inject a colored plastic product; (4) Finished product: Injected a colored plastic product; (5) Wait for (A) colored plastic 1 〇 Nearly used up; (6) Color-changing quantitative plastic: Replace (B) color plastic 2 with (A) color plastic 10; (7) Stir and heat (B) color plastic: Change the color with (A) Plastic 10 is different from (B) color plastic 2. After stirring and heating, the (B) color plastic 2 is melted and injected into the nozzle device 1 of the injection molding machine so that the new plastic flows in the middle; (8) (A) color Mixing with (B) color plastic: Mix the injected new (B) color plastic 2 with the remaining (A) color plastic 10 until the volume ratio gradually changes (see Figure 2); (9) Injection: (A) Color and (B) color plastic 1 ◦, 2 are mixed and changed and then injected into the mold, and then can be injection molded with (A) color plastic products Another color gradient of the plastic products; (x) Finished:
411314 五、發明說明（4) 注塑出一與（A)色塑膠製品之另一漸層色之塑膠 製品，令塑膠製品可產生多色彩表現者。 由上述之製法依此類推，本發明將可注塑出使用者所 需同一色系或不同色系之漸.層色塑膠製品，從而其具有產 業上利用價值已無庸置疑，且該項製法研發又為前所未見 ，爰依法提出發明專利申請，謹請早曰賜准專利是所至盼411314 V. Description of the invention (4) Injection molding of plastic products of one and (A) color plastic products with another gradient color, so that plastic products can produce multi-color expression. From the above-mentioned manufacturing method and so on, the present invention can inject injection of the same color system or different color systems required by the user. Layered plastic products, so that it has industrial use value is no doubt, and the development of As never before, Ji Yi has filed an application for an invention patent according to law.
第7頁Page 7