Claims (1)
ข้อถือสิทธฺ์ (ทั้งหมด) ซึ่งจะไม่ปรากฏบนหน้าประกาศโฆษณา :Disclaimers (all) that will not appear on the advertisement page:
1.ฝาปิดขวดที่มีกลไกป้องกันการเติมซ้ำของเหลวแบบช่องไหลปรับทิศทางพร้อมร่องบังคับวาล์ว ที่มีลักษณะประกอบด้วยฝาปิด(1)และกลไกป้องกันการเติมซ้ำของเหลวอยู่ภายในฝาปิด โดยฝาปิด(1)มี ลักษณะเป็นฝาปิดครอบที่มีผนังด้านข้างยาวระยะหนึ่ง ส่วนใกล้ปลายล่างมีแนวรอยปรุ(2)โดยรอบที่ สามารถฉีกขาดได้สำหรับแยกฝาปิด(1)ออกจากส่วนของล่างที่ถูกรีดรัดยึดตรึงกับปากขวดเมื่อเปิดฝาปิด ออกจากขวดบรรจุ ส่วนเหนือแนวรอยปรุ(2)ระยะหนึ่งเป็นส่วนสำหรับรีดเกลียวเข้ากับเกลียวของปากขวด และส่วนใกล้ปลายบนมีลักษณะรีดร่อง(3)ให้เป็นส่วนยื่นเข้าด้านในสำหรับบังคับยึดชิ้นส่วนประเก็นให้ยึด ติดอยู่ด้านในของฝาปิด(1)และบริเวณด้านข้างเหนือแนวรีดร่อง(3)โดยรอบมีลักษณะเป็นพื้นผิวที่ไม่เรียบ (4)สำหรับป้องกันการลื่นขณะใช้มือจับหมุนปิดหมุนเพื่อเปิดฝาขวด กลไกป้องกันการเติมซ้ำของเหลวมีลักษณะด้วย ชิ้นส่วนตัวจุก(5)เป็นชิ้นส่วนหลักที่ใช้ประกอบชุดกลไกนี้โดยส่วนกลางภายในประกอบด้วย ชิ้นส่วนช่องไหลผ่านของของเหลวจากปลายด้านล่างออกสู่ปลายด้านบนที่ประกอบยึดอยู่กับภายในคอขวด โดยผนังส่วนนอกของชิ้นส่วนตัวจุก(5)โดยรอบมีครีบ(6)หรือแถววงแหวนจำนวนหนึ่งต่อยื่นเป็นระยะ โดยอย่างน้อยหนึ่งแถบมีความยาวแตกต่างจากความยาวของแถบอื่นๆ สำหรับเป็นแถบผนึกยึดกับผนังด้าน ในของคอขวด ซึ่งภายในของชิ้นส่วนตัวจุก(5)มีชิ้นส่วนช่องไหล(7)ที่ขึ้นรูปมีลักษณะพอดีสอดเข้ายึดกับ ผนังดันในของตัวจุก ชิ้นส่วนตัววาล์ว(8)ขึ้นรูปมีลักษณะวาล์วแกน และสามารถเคลื่อนที่อิสระภายในห้องวาล์วได้ เมื่อ ประกอบอยู่ภายในชิ้นส่วนตัวจุก(5)และสามารถปิดขวางช่องเปิดปลายด้านล่างของชิ้นส่วนตัวจุก(5)ที่ เชื่อมต่อกับภายในขวดขณะขวดตั้งขึ้น ชิ้นส่วนประเก็น(9)เป็นชิ้นส่วนที่ใช้ยึดชุดกลไกให้ติดอยู่กับฝาปิด(1)ก่อนการบรรจุขวด และยัง เป็นชิ้นส่วนที่ใช้ป้องกันการรั่วซึมของฝาขวดเมื่อปิดผนึกฝาแล้ว มีลักษณะพิเศษคือ ชิ้นส่วนช่องไหล(7)ด้านในมีลักษณะเป็นผนัง(14)จำนวนหนึ่งยื่นตรงเข้าด้าน ในตามแนวรัศมีรอบแนวแกนชิ้นส่วนช่องไหล และเรียงตัวขนานแนวแกนในทิศทางเดียวกันที่มีระยะห่าง ระหว่างกันเท่าๆกัน ตามแนวดิ่ง หรือตามแนวทำมุมกับแนวแกนของฝาปิดขวด สำหรับบังคับทิศทางการ ไหลของเหลวที่ไหลผ่าน โดยส่วนปลายแต่ละอันของผนัง(14)ยื่นเข้าด้านในสู่แนวแกนของชิ้นส่วนช่อง ไหล(7)ข้างต้นมีระยะเว้นระหว่างปลายผนัง(14)แต่ละอันเป็นช่องว่าง และและบริเวณส่วนปลายผนัง(14) ยื่นแต่ละอันที่เชื่อมต่อกับช่องว่างบริเวณกึ่งกลางตำแหน่งเหนือชิ้นส่วนตัววาล์วมีลักษณะเป็นส่วนโค้ง(16) ทำให้บริเวณกึ่งกลางรอบช่องว่างบริเวณกึ่งกลางดังกล่าวมีลักษณะเป็นส่วนเว้า สำหรับรับตัววาล์วทรงกลม ภายในห้องวาล์วให้อยู่ในตำแหน่งเปิด ขณะผู้ใช้เทของเหลวภายในขวดบรรจุออก1.Cap of a bottle with a directional double filling prevention mechanism with valve groove. Its feature consists of a cap (1) and a mechanism to prevent the re-filling of the liquid inside the cap. With cap (1) available The appearance is a cover with a long side wall. Near the lower end, there is a perforation line (2) surrounding that Tearable for separating the cap (1) from the rolled bottom, fastened to the mouth of the bottle when the cap is opened. Out of the bottle The part above the perforation line (2) is for rolling the thread into the thread of the bottle mouth. And the part near the upper end is rolled into a groove (3) to be an inward protrusion for force fixing the gasket parts to be fixed Affixed to the inside of the cover (1) and on the side above the rolling groove (3), all around it is a uneven surface. (4) For preventing slippage while using the handle, turn and turn to open the bottle cap. The mechanism for preventing replenishment of the liquid is also characterized by The spigot body (5) is the main part used to assemble this mechanism. The fluid-flow part from the bottom end to the upper end mounted on the inside of the bottle neck. By the outer wall of the spigot part (5) around, there are fins (6) or a number of ring rows per extension. Where at least one strip is different in length from the other bar. As a seal strip attached to the inner wall of the bottleneck, the inside of the cork body (5) has a flow piece (7), molded, fitted to Built-in pressure wall of the stopper Valve body (8), molded with core valve style And can move freely inside the valve chamber when assembled inside the spigot body (5) and can block the openings at the bottom end of the spigot body (5) at Connected to the inside of the bottle while the bottle is upright The gasket piece (9) is the part used to secure the mechanism to the cap (1) prior to filling the bottle and is also used to prevent leakage of the bottle cap once the cap is sealed. There is a special feature The flow part (7), the inside of which is a number of walls (14), protruding straight inward. In the radial, around the axial part, the flow channel And arranged parallel to the axes in the same direction with distance Between evenly, vertically or at an angle to the axis of the bottle cap. For steering Flowing liquid that flows through With each end of the wall (14) extending inward to the axis of the channel element Flow (7) above the spacing between each end of the wall (14) is a gap. And and at the end of the wall (14), each protrusion connected to the center gap above the valve body is curved (16), making the center area around the gap in the shape of a concave. For receiving spherical valve bodies Inside the valve chamber to be in the open position While the user empties the liquid inside the bottle