Claims (8)
1. เครื่องเก็บสำหรับหูกทอผ้า ประกอบด้วย รางที่มีหวีประกอบครบชุดติดตั้งอยู่ ร่องทำขึ้นบนผิวบนของรางดังกล่าว เครื่องสำหรับกำเนิดแรงแม่เหล็ก ซึ่งเคลื่อนที่ตามร่อง และ กระสวยดูดด้วยแรงแม่เหล็กดังกล่าวให้วิ่งไปมาในร่องดังกล่าว ที่ซึ่งในรางมีช่องเจาะไว้ตามร่องและกระสวยดังกล่าวมีรูยึดสลัก เครื่องกำเนิดแรงแม่เหล็กดังกล่าวมีความสามารถจะยืดหรือหดสลักยึด ซึ่งสามารถจะเข้าไปในรูปยึดของกระสวยดังกล่าวทันทีหลังจากการเก็บได้สิ้นสุดลง1. The collector for the loom consists of a rail with a complete set of combs installed. A groove is made on the top surface of the rail. Machine for generating magnetic force Which moves along the groove and the shuttle is sucked with such magnetic force to run back and forth in the groove Where in the rails there are holes drilled along the grooves and the bobbin has holes for fixing the bolts. Such a magnet generator is capable of extending or shrinking the mounting bolts. Which can go into the holder of the bobbin immediately after the collection has ended.
2. เครื่องเก็บดังได้ขอถือสิทธิตามข้อถือสิทธิ 1 ซึ่งรางดังกล่าวมีร่องนำอยู่บนนั้น ร่องนำดังกล่าวมีส่วนระดับต่ำนำเครื่องกำเนิดแรงแม่เหล็กดังกล่าวเคลื่อนไปในลักษณะที่กระสวยจะสามารถเคลื่อนที่เก็บได้ มีส่วนระดับสูงสองส่วนตั้งอยู่สองข้างของส่วนระดับต่ำดังกล่าว และส่วนลาดสองส่วนต่อส่วนระดับต่ำและส่วนระดับสูงดังกล่าว เครื่องกำเนิดแรงแม่เหล็กดังกล่าว มีลูกล้อนำทางเคลื่อนไปตามร่องนำ เพื่อจะยืดและหดสลักยึดดังกล่าว2. The collector holds the rights according to claim 1 which the track has a guide on it. The guide channel has a low profile, leading the magnet generator to move in such a way that the bobbin can move around. There are two high-level segments on either side of the low-level segment. And two slopes per section of the lower and the high level. Such a magnetic force generator With guide castors moving along the guide groove In order to extend and retract the mounting bolts
3. เครื่องเก็บดังได้ขอถือสิทธิตามข้อถือสิทธิ 1 ซึ่งมีแรงแม่เหล็กเคลื่อนไปมาตามร่องของรางดังกล่าว รวมถึงบ่ายึดตายตัวซึ่งยึดแน่นใกล้กับสองปลายของร่องดังกล่าวอุปกรณ์หมอนรับสองตัวยึดอยู่กับบ่ายึดตายตัวดังกล่าวตามลำดับเพื่อดูดกลืนแรงเฉื่อยของกระสวยเมื่อกระสวยเริ่มและหยุดที่ปลายของร่องดังกล่าว และมีก้านสองก้านตามลำดับถูกรองรับอยู่บนบ่ายึดตายตัวและเลื่อนไปตามร่องดังกล่าว แต่ละตัวของก้านดังกล่าวรวมถึงตัวหยุดมีแผ่นหมอนรองรับติดกับผิวปลายด้านหนึ่งของตัวหยุดดังกล่าวและตัวยืดหยุ่นอยู่ระหว่างบ่ายึดตายตัวและตัวหยุดดังกล่าว3. The collector holds the rights according to claim 1 which has a magnetic force moving along the groove of the said track. This includes the fixed shoulder which is firmly fixed near the two ends of the groove. The two support cushions are attached to the fixed shoulder respectively to absorb the shuttle inertia when the shuttle starts and stops at the ends of the groove. And two rods, respectively, are supported on the fixed shoulder and slide along the groove. Each of these shank, including a stop, has a support pad attached to the surface of one end of the stop and an elastic reside between the fixed shoulder and the stop.
4. เครื่องเก็บดังได้ขอถือสิทธิตามข้อถือสิทธิ 1 ซึ่งเครื่องกำเนิดแรงแม่เหล็กถึงเชือกไร้ปลายดึงให้ตึงที่มีส่วนซึ่งเคลื่อนที่ใต้ร่องดังกล่าว แม่เหล็กยึดติดกับเชือกไร้ปลายดังกล่าวและกลไกขับขับเชือกไร้ปลายดังกล่าว ให้หมุนเวียนเคลื่อนที่ไปมาในทิศทางตามเข็มนาฬิกาและทวนเข็มนาฬิกาสลับกัน4. The collector hereby holds the rights under claim 1, in which the magnet generator reaches the endless rope with a tension member moving under the groove. The magnet is attached to the endless rope and the drive mechanism for the endless rope. To cycle, move in a clockwise and counterclockwise direction alternately.
5. เครื่องเก็บดังได้ขอถือสิทธิตามข้อถือสิทธิ 4 ซึ่งหูกดังกล่าวมีแกนหมุนหลักติดตั้งหมุนอยู่ กลไกขับรวมถึงหน่วยเปลี่ยนความเร็วยึดติดกับหูกดังกล่าวและมีแผ่นรับกำลังหมุนเข้าและแกนส่งกำลังหมุนออก ลูกรอกเชือกสวมปลอกตรึงแน่นบนแกนส่งกำลังหมุนออกและก้านต่อด้วยจุดหมุนและต่างศูนย์กับแผ่นรับกำลังหมุนเข้าดังกล่าวที่ปลายหนึ่ง และจากนั้นไปยังแกนหมุนหลักของอีกปลายหนึ่ง เชือกไร้ปลายดังกล่าวได้พันหลายรอบบนลูกรอกเชือกดังกล่าว ซึ่งแผ่นรับกำลังหมุนเข้าจะสามารถแกว่งไกวได้ในระยะที่ได้เลือกกำหนดไว้ เพื่อให้หมุนรอกเชือกในอัตราเร็วกว่าของแกนหมุนหลัก ในทิศทางตามเข็มนาฬิกาและทวนเข็มนาฬิกาสลับกันโดยหน่วยตัวเปลี่ยนความเร็วดังกล่าว5. The collector holds the rights according to claim 4, which has the main spindle installed to rotate. The drive mechanism, including the speed change unit, is attached to the spindle and has an inlet and pivot plate. The sheathed pulley is tightly fixed on the pivot rod and the shaft is connected with a pivot point and off the shaft at one end. And then onto the main spindle on the other end The endless rope was wrapped many times on the pulley. Which the receiving plate is rotated into will be able to swing in the chosen distance In order to turn the rope pulley at a faster rate than that of the main spindle In the clockwise and counterclockwise directions alternately by the a speed changer unit.
6. เครื่องเก็บดังได้ขอถือสิทธิตามข้อถือสิทธิ 5 ซึ่งหูกดังกล่าวรวมถึงวิถีทางตีที่มีแกนแกว่งสองแกน กลไกขับดังกล่าวรวมถึงรอกปรับ ยึดติดกับหูกในระยะใกล้เคียงของแกนแกว่ง เพื่อให้เชือกไร้ปลายดังกล่าวยื่นรอบลูกรอกปรับลูกรอกปรับดังกล่าวได้จัดให้อยู่ในลักษณะต่างศูนย์บนสองด้านของแกนแกว่งดังกล่าว ดังนั้น เมื่อแกว่งตำแหน่งของแกนของลูกรอกปรับจะเปลี่ยนแปลงไป เพื่อให้แปรเปลี่ยนระยะระหว่างลูกรอกเชือกดังกล่าวและลูกรอกปรับดังกล่าว ดังนั้น จะชดเชยความยาวของเชือกดังกล่าว6. The collector hereby holds the rights under claim 5, which includes a two-axis swinging-axle. The drive mechanism includes an adjusting pulley. Attached to the loom at close distance of the swing axis. In order for the said endless rope to protrude around the adjusting pulley, the adjustment pulley is aligned in a displacement position on both sides of the shaft, so when swinging the axis of the adjusting pulley will change. To vary the distance between the pulley of the rope and the pulley, therefore, the length of the said rope will be compensated.
7. เครื่องเก็บดังได้ขอถือสิทธิตามข้อถือสิทธิ 5 ที่ซึ่งเครื่องกำเนิดแรงแม่เหล็กมีตัวยืด และตัวยืดดังกล่าวรวมถึงลูกรอกดึงให้ดึงสองอันติดอยู่ใต้รางดังกล่าว มีสปริงออกกำลังดึงต่อลูกรอกดึงให้ตึงดังกล่าว และตัวหยุดสองตัวตั้งอยู่ด้านนอกของลูกรอกดึงดังกล่าว7. The collector holds the rights according to claim 5, where the magnetic force generator has a stretch And the extenders, including the two pull pulley, are attached under the rail. There is an exercise spring to pull the pulley to keep it taut. And two stops are located outside the pulley.
8. เครื่องเก็บดังได้ขอถือสิทธิตามข้อถือสิทธิ 5 ซึ่งหน่วยเปลี่ยนความเร็วดังกล่าว รวมถึงกรอบยึดติดกับหูกดังกล่าวและมีเฟืองวงแหวนยึดติดอยู่บนผิวด้านใน ท่อแกนรับกำลังเข้ารองรับด้วยแบริ่งอยู่ภายในกรอบดังกล่าว มีแกนส่งกำลังออกรองรับด้วยแบริ่งภายในแกนรับกำลังเข้าดังกล่าวเฟืองดวงอาทิตย์สวมปลอกอยู่บนแกนส่งกำลังออกดังกล่าวเฟืองดาวเคราะห์หลายตัวขบกับทั้งเฟืองดวงอาทิตย์และเฟืองวงแหวนดังกล่าวและเฟืองส่งกำลังออกสวมปลอกยึดตายตัวบนแกนส่งกำลังออกดังกล่าว ลูกรอกเชือกดังกล่าวติดอย่างแน่นกับปลายนอกของแกนส่งกำลังออกดังกล่าว8. The collector has requested the rights according to claim 5, which the speed change unit Including the frame attached to the aforementioned hoop and there is a ring gear attached on the inner surface The input rod tube is supported by a bearing inside the frame. The output shaft is supported by a bearing inside the input shaft, the sun gear is sheathed on the shaft.Many planetary gears engage both the sun gear and the ring gear and the output gear. Wear a fixed sleeve on the output shaft. The pulley is firmly attached to the outer end of the PTO shaft.