(54) УСТРОЙСТВО ПРИЕМА И ПЕРЕДАЧИ ИНФОРМАЦИИ(54) DEVICE FOR RECEPTION AND TRANSFER OF INFORMATION
Изобретение относитс к св зи и может использоватьс при проектировании с стем управпени энергетическим режимом радиолинии с многостанционным доступом к ретрансл тору. Известно устройство приема и передачи информации, содержащее приемный бпок выход которого подключен к блоку управлени , блок коррекции, подключенный к входу передатчика, другой вход которого соединен с выходом блока управПени pj. Однако известное устройство имеет сравнительно невысокую помехоустойчивость . Цель изобретени - повышение помехоустойчивости . Поставленна цель достигаетс тем, что в устройство введены два блока вычи тани и блок задержки, при этом выход блока коррекции подключен к входам пер- вого блока вычитани и блока задержки, выход которого подключен к другому входу первого блока вычитани , выход которого подключен к входу второго блока вычитани , другой вход которого соединен с выходом блока управлени , а выход второго блока вычитани подключен к входу блока коррекции. На чертеже приведена структурна алектрическа схема предлагаемого устройства. Устройство приема и передачи информации содержит приемный блок 1, блок 2 управлени , передатчик 3, блок 4 уплотнени , два блока 5 в 6 вычитани , блок 7 коррекции и 8 задержки. Устройство работает следующим образом . В различных подстволах приемного блока 1 выдел ютс сигналы ведущей станции (на чертеже не показана) и собственный сигнал, поступающие через ретрансл тор (на чертеже не показан), и подаютс в блок 2. Эти сигналы сравниваютс в блоке 2 либо по амплитуде при частотном уплотненчн, либо по частоте и фазе при временном уплотнении. Ошибка рассогласовани проходит через блох 6 и блок 7 на передатчик 3 дл управлени The invention relates to communications and can be used in the design with a control system for the power mode of a radio link with multiple access to a repeater. A device for receiving and transmitting information is known, which contains the receiving output of which is connected to the control unit, a correction unit connected to the input of the transmitter, the other input of which is connected to the output of the control unit Pj. However, the known device has a relatively low noise immunity. The purpose of the invention is to improve noise immunity. The goal is achieved by introducing two deduction blocks and a delay block into the device, while the output of the correction block is connected to the inputs of the first subtraction block and the delay block whose output is connected to another input of the first subtraction block, the output of which is connected to the second a subtraction unit, another input of which is connected to the output of the control unit, and the output of the second subtraction unit is connected to the input of the correction unit. The drawing shows the structural electrical scheme of the device. The device for receiving and transmitting information contains a receiving unit 1, a control unit 2, a transmitter 3, a compacting unit 4, two 5-to-6 subtracting units, a correction unit 7, and 8 delays. The device works as follows. The various sub-gates of the receiving unit 1 allocate signals from the master station (not shown) and their own signals coming through the repeater (not shown), and are fed to block 2. These signals are compared in block 2 or in amplitude with frequency compressed , or in frequency and phase with a temporary seal. The error of the error passes through the flea 6 and block 7 to the transmitter 3 to control
ei4j режимом работы. При частотном уплотнении управл ет мощность излучени или индекс моаул ции в передатчике 3, а при временном - частота и фаза передаваемых импульсов с цепью синхрониза ции соойцёний от всех станций св зи . Дл получени устойчивой работы спужит блок 7.ei4j mode of operation. With frequency multiplexing, it controls the radiation power or the oscillation index in transmitter 3, and for time frequency, the frequency and phase of the transmitted pulses with the synchronization circuit from all communication stations. In order to obtain steady operation, block 7 will lower.
Дл уменьшени вли ни запапывани используютс блоки 5, 6 и бпок 8. При &ТОМ выходной сигнал блока 7 поступает на соответствукдцие вхооы блока 5 непосредственно и чррез бпок 8. Поскольку статический коэффициент передачи блока 8 равен единице, то в установившемс режиме , поступак цие в блок 5 сигналы компенсчруют друг друга. При изменении по каким-либо причинам сигнала на выходе блока 2, сигнал на выходе блока 7 измен етс до тех пор, пока выходной сигнал блока 5 не скомпенсирует это изменение . При атом приращение сигнала бпока 7 вызывает изменение регулируемого параметра передатчика 3 (мощности, индекса модул ции, времени включени и т.д.) и с запаздыванием - обратное изменение сигнала на выходе блока 2. Кроме того, сигнал ни выходе блока 5 становитс равным нулю, поскольку приращение сигнала блока 7 на выходе блока 8 компенсирует аналогичный сигнал на другом входе блока 6.Blocks 5, 6, and bpoc 8 are used to reduce the impact of deposition. With & TOM, the output signal of block 7 is fed to the corresponding inputs of block 5 directly and bpoc 8. As the static transfer coefficient of block 8 is equal to one, in steady state in block 5, the signals compensate each other. When a signal at the output of block 2 changes for some reason, the signal at the output of block 7 changes until the output signal of block 5 compensates for this change. With an atom, the signal increment of the signal 7 causes a change in the adjustable parameter of the transmitter 3 (power, modulation index, turn-on time, etc.) and with a delay the reverse change of the signal at the output of block 2. Moreover, the signal of the output of block 5 becomes zero since the increment of the signal of block 7 at the output of block 8 compensates for a similar signal at the other input of block 6.
Предлагаемое устройство позвол ет регулировать параметры передаваемого сигнала с учетом оптимизации режима работы сети св зи.The proposed device allows adjusting the parameters of the transmitted signal with regard to optimization of the operating mode of the communication network.