(54) ЭЛЕКТРИЧЕСКИЙ СЕПАРАТОР(54) ELECTRIC SEPARATOR
Электрический сепаратор работает следующим образом.The electric separator works as follows.
Исходньлх материал из бункера .1 поступает на верхний лоток 2, по которому он перемещаетс в направлении высоковольтного электрода 20,The original material from the hopper .1 enters the upper tray 2, through which it moves in the direction of the high voltage electrode 20,
Под действием электрического пол образованного между высоковольтным 2U и заземленным 2 электродами происходит разделение частиц материала в зависимости от Их электрофизических свойств. Частицы, имеющие большую диэлектрическую проницаемость и частицы,имеющие удлиненную или плоскую форму, в зоне разделени ориентируютс вдоль силовых линий электрического пол , перемещаютс к верхнему углу высоковольтного эЛектрода 20, перелетают через него и разгружаютс в приемник 27, Частицы материала с большой диэлектрической проницаемостью, плоской формой, имеющие большую массу, долетев до высоковольтного электрода, получают избыточный зар д, отталкиваютс от электрода и попадгиот в приемник 25. Частицы материала с низкой диэлектрической проницаемостью и частицы,имеющее округлую форму, незначительно отклон ютс к высоковольтному электроду и по плоскости скольжени 13 перемещаютс на нижерасположенный лоток 3, В нижеразмещенных секци х сепаратора осуществл етс многократна перечистка материала. При разделении руды крупных классов рекомендуетс производить отсос воздуха из зоны сепарации через патрубки 28,29,30,31, что способствует транспортировке крупных плоских или быстроперезар жающихс частиц в приемник 27.Under the action of an electric field formed between a high-voltage 2U and a grounded 2 electrode, material particles are separated depending on their electro-physical properties. Particles having a large dielectric constant and particles having an elongated or flat shape, in the separation zone, orient themselves along the electric field lines, move to the upper angle of the high voltage electrode 20, fly over it and unload into the receiver 27. Particles of a material with a high dielectric constant, flat form, having a large mass, reaching the high-voltage electrode, receive an excess charge, are repelled from the electrode and get into the receiver 25. Particles with a low dielectric permeability and particles, having a rounded shape, slightly deviate to the high voltage electrode and move along the slip plane 13 to the lower tray 3. In the downstream sections of the separator, the material is repeatedly cleaned. In the separation of ores of large classes, it is recommended to extract air from the separation zone through nozzles 28, 29, 30, 31, which facilitates the transportation of large flat or quickly reloading particles to the receiver 27.
Выполнение коронирующего электрода в виде швеллера и с возможностью перемещени по вертикгипи, а заземленного электрода - с возможностью поворота относительно горизонтальной оси позвол ет создать электрическое поле повышенной напр женности у верхнего угла высоковольтного электрода и регулировать напр жен-. ность электрического пол в зоне сепарации и, следовательно, повысить эффективность процесса разделени .Making the discharge electrode in the form of a channel and with the ability to move vertically, and a grounded electrode with the ability to rotate about a horizontal axis, allows you to create an increased electric field at the upper corner of the high voltage electrode and adjust the voltage. electric field in the separation zone and, consequently, increase the efficiency of the separation process.