ющей 7 и установленной на горизонтальной направл ющей с возможностью перемещени посредством привода 8 кареткой 9 с захватом 10. Захват 10 выполнен из двух шарнирных челюстей 11 с приводом 12.7 and mounted on a horizontal rail that can be moved by means of an actuator 8 by a carriage 9 with a gripper 10. The gripper 10 is made of two hinged jaws 11 with an actuator 12.
Привод 8 перемещени каретки 9 может быть выполнен, например, из электродвигател 13, черв чной пары 14, зубчатой пары 15, ходового винта 16 и ходовой гайки 17, а привод 12 захвата 10 может быть выполнен, например, из электродвигател 18, черв чной пары 19, ходового винта 20 с правой и левой резьбой, ходовых гаек 21 и соединенных с ними и шарнирными челюст ми 11 звеньев 22.The drive 8 for moving the carriage 9 can be made, for example, of an electric motor 13, a worm gear pair 14, a gear pair 15, a lead screw 16 and a running nut 17, and the drive 12 of the gripper 10 can be made, for example, of an electric motor 18, a worm gear pair 19, the lead screw 20 with the right and left threads, the running nuts 21 and 11 links 22 connected to them and the hinged jaws.
Погружение сваи 23 производ т следующим образом. Крюком 4 устанавливают сваю в полость раскрытых челюстей И захвата 10 и приводом 12 закрывают челюсти. Затем подвешенную сваю на крюке 4 и закрытую в полости захвата поворотом стрелы базовой машины и приводом 8 каретки 9 перемещают вместе с кареткой вдоль направл ющей к месту погружени . На месте погружени сваю опирают на грунт и освобождают крюк 4. Опертую на грунт сваю удерлшвают в вертикальном положении захватом 10. Затем на крюк 4 подвешивают погружающее устройство 2 с автоматическим наголовником 3 и одевают на голову сваи, приспускают тросы подвески и включают погружающее устройство, которое погружает сваю до уровн захвата 10. После чего захват 10 раскрывают и отвод т от сваи, затем погрул ;ение продолжают на полную глубину.The immersion of the pile 23 is as follows. Hook 4 install a pile in the cavity of the opened jaws And the grip 10 and the drive 12 closes the jaws. Then the suspended pile on hook 4 and closed in the grip cavity by rotation of the boom of the base machine and drive 8, the carriage 9 is moved along with the carriage along the guide to the dive site. At the dive site, the pile is supported on the ground and the hook 4 is released. The pile supported on the ground is held upright by the grip 10. Then the submersible device 2 with the automatic headrest 3 is suspended on the hook 4 and put on the pile head, the suspension cables are lowered and the submersible device is inserted submerges the pile to the level of grip 10. After that, the grip 10 is opened and retracted from the pile, then the plunging is continued to its full depth.
Наличие выносной опоры с горизонтальной направл ющей и установленной на ней с возможностью перемещени посредством привода кареткой с захватом дает возможность ускорить и облегчить наведение сваи на место погружени , а также с одной остановки базовой машины дает возможность погружать несколько свай с пр молинейным их расположением на ноле и использоватьThe presence of the outrigger support with a horizontal guide and mounted on it with the possibility of movement by means of a drive with a gripping carriage makes it possible to accelerate and facilitate the guidance of the pile to the dive site, and also from one stop of the base machine makes it possible to immerse several piles with a straight line position use
базовую машину дл вспомогательных операций (разгрузка и установка свай на место погружени и др.) независимо от погружаюших и направл ющих устройств, что значительно повышает производительность труда .base machine for auxiliary operations (unloading and installation of piles to the dive site, etc.) regardless of the immersing and guiding devices, which significantly increases labor productivity.