нени с валом / со шлицами, параллельными оси вала /. Так как сухарики 6 наход тс в вырезах 8 звездочки 7, они тоже поворачиваютс со звездочкой 7 и прижимаютс к бараб&иу 2, обеспечива этим сцепление полумуфт. Поверхность сухарика 6, которой он контактирует с внутренней поверхностью барабана 2, така же, как и поверхность барабана 2 в этом месте, что обеспечивает большую площадь сцеплени сухариков 6 с барабаном 2. Дл расцеплени полумуфт валу / придаетс поступательное движение в обратном направлении . Звездочка 7 тоже вращаетс в обратном направлении. Сухарики 6 поворачиваютс , и их коптакт с барабаном 2 нарушаетс .with the shaft / with slots parallel to the shaft axis /. Since the crunches 6 are located in the notches 8 of the asterisk 7, they also rotate with the asterisk 7 and are pressed against the drum & 2, thereby ensuring the coupling of the coupling halves. The surface of the rusk 6, which it contacts with the inner surface of the drum 2, is the same as the surface of the drum 2 at this place, which provides a large area of adhesion of the rusks 6 to the drum 2. To release the coupling halves to the shaft / attached to the forward movement in the opposite direction. Star 7 also rotates in the opposite direction. The crunches 6 are rotated and their contact with the drum 2 is disturbed.
не вл етс реверсивной. При вра-. щении вала / по направлению стрелки (фиг. 2) и барабана 2 против направлени стрелки (фиг. 2), когда каждый из них вл етс ведущим , крут щий момент с вала / на барабан 2 и наоборот передаетс через сухарики 6, оси 5, диски 4 и щлицевое соединение. Это обеспечивает увеличение силы прижати сухариков 6 к барабану 2 при увеличении передаваемого крут щего момепта. Если вращение ведущих иолумуфт обратно вышеуказанному , крут щий момент передаетс через паз 10, выступ 9, звездочку 7 и сухарики 6. Это приводит к уменьшению силы прижати сухариков 6 к барабану 2 при увеличении передаваемого момента. not reversible. When vra-. shaft in the direction of the arrow (fig. 2) and drum 2 against the direction of the arrow (fig. 2), when each of them is the master, the torque from the shaft / to the drum 2 and vice versa is transmitted through the crunches 6, axis 5, disks 4 and shlitsevy connection. This provides an increase in the force of pressing the crackers 6 against the drum 2 with an increase in the transmitted torque. If the rotation of the lead iolumuffs is back to the above, the torque is transmitted through the groove 10, the protrusion 9, the sprocket 7 and the crackers 6. This leads to a decrease in the pressing force of the crackers 6 against the drum 2 with an increase in the transmitted moment.
Сцепление полумуфт, когда сила ирижати сухариков 6 с увеличением передаваемого крут щего момента увеличиваетс , ироисходит при незначительном поступательномCoupling of the half couplings, when the force of the croutons of the croutons 6 increases with the transmitted torque, and occurs with an insignificant translational
Зсилии на вал /, а расцепление требует значительно больщего усили . Дл того, чтобы уменьшить поступательное усилие на вал / при расцеплении муфты, винтообразный изгиб паза 10 при одном и том же угле поворота звездочки 7 делают более выт нутым, кроме того, увеличивают соотношение рассто ний от звездочки 7 до оси 5 и от оси 5 до барабана 2.Force on the shaft /, and disengagement requires much more effort. In order to reduce the translational force on the shaft / when disengaging the coupling, the helical bend of the groove 10 at the same angle of rotation of the sprocket 7 is made more elongated, moreover, the ratio of the distances from the sprocket 7 to the axis 5 and from axis 5 to drum 2.
Применение предложенной муфты позвол ет иметь муфту сцеплени с надежной работой на больших и малых скорост х вращени ведущей полумуфты.The use of the proposed coupling allows a clutch to be operated with reliable operation at high and low speeds of rotation of the drive coupling half.