Claims (2)
регулируемого усилител 2 этого канала и выходу эталонного усилител . Предложенное многоканальное усилительное устройство работает следующим образом. Многоканальное усилительное устройство с автоматической стабилизацией коэффициента усилени реализует алгоритм следующего вида t/BXo и,. вых. вх. 0,(1) где 6вх„ и ,-значени сигналов на входе и выходе эталонного усилител 1, и L Bux/-значение сигналов на входе и выходе регулируемого усилител г-го канала, г - пор дковый номер регулируемого канала, , 2, 3, ... N. После элементарных преобразований уравнени (1) можно получить Кг Ко, где Ко к Кг - коэффициенты усилени эталонного усилител 1 и регулируемого усилител 2 i-ro канала. При невыполнении услови (3) в любом из каналов усилени на выходе щычитател 3 данного канала образуетс , согласно выражению (1), разностное напр жение AC/i, пропорциональное изменению коэффициента усилени регулируемого усилител 2 данного канала относительно эталонного усилител 1, равное Ш, . - f/выхо- f/BX.(4) Это напр жение поступает на управл ющий вход регулируемого усилител 2 соответствующего канала и под его воздействием коэффициент усилени данного канала измен етс до тех пор, пока не будет выполнено равенство (3). В этом случаеАf/i 0. Предложенное многоканальное усилительное устройство обеспечивает поддержание идентичности коэффициентов усилени регулируемых каналов одновременно с выполнением основной работы. В качестве эталонного усилител может быть использован любой усилительный канал системы. Формула изобретени Многоканальное усилительное устройство с автоматической стабилизацией коэффициента усилени , содержащее эталонный усилитель и tN, где , 2, 3 и т. д., каналов усилени , в каждом из которых включены регулируемый усилитель и вычитатель, подключенный к управл ющему входу регулируемого усилител , отличающеес тем, что, с целью повыщени стабильности коэффициента усилени , в каждом канале входы вычитател соединены с выходами двух введенных перемножителей, входы одного из которых подключены к входу эталонного усилител и выходу канального регулируемого усилител , а входы другого - к входу канального регулируемого усилител и выходу эталонного усилител . Источники информации, прин тые во внимание при экспертизе: 1. Крисилов Ю. Д. Автоматическа регулировка и стабилизаци усилени транзисторных схем, М., «Советское радио, 1972 г., стр. 187, рис. 4, 19 (аналог). adjustable amplifier 2 of this channel and the output of the reference amplifier. The proposed multi-channel amplifying device operates as follows. A multichannel amplifying device with automatic stabilization of the gain factor implements the algorithm of the following type t / BXo and ,. out in 0, (1) where 6in and, are the values of the signals at the input and output of the reference amplifier 1, and L Bux / is the value of the signals at the input and output of the adjustable amplifier of the rth channel, r is the sequence number of the adjustable channel,, 2, 3, ... N. After the elementary transformations of equation (1), you can get Cg Co, where K o K Kg are the gain factors of the reference amplifier 1 and the adjustable amplifier 2 of the i-ro channel. If the condition (3) is not fulfilled in any of the amplification channels at the output of switch 3 of this channel, the differential voltage AC / i proportional to the change in the gain of adjustable amplifier 2 of this channel relative to the reference amplifier 1, equal to Ш, is formed according to expression (1). - f / output f / BX. (4) This voltage is applied to the control input of the adjustable amplifier 2 of the corresponding channel and under its influence the gain of this channel changes until equality (3) is satisfied. In this case, AF / i 0. The proposed multi-channel amplifying device ensures that the gains of the adjustable channels are identical simultaneously with the execution of the main work. As a reference amplifier, any amplifying channel of the system can be used. Claims of the Invention A multichannel amplifying device with automatic stabilization of the gain, containing a reference amplifier and tN, where, 2, 3, etc., are amplification channels, each of which includes an adjustable amplifier and a subtractor connected to the control input of an adjustable amplifier, different so that, in order to increase the stability of the gain, in each channel the inputs of the subtractor are connected to the outputs of two entered multipliers, the inputs of one of which are connected to the input of the reference amplifier and the output of the channel adjustable amplifier, and the inputs of the other to the input of the channel adjustable amplifier and the output of the reference amplifier. Sources of information taken into account in the examination: 1. Yu. D. Krisilov. Automatic adjustment and stabilization of amplification of transistor circuits, M., “Soviet Radio, 1972, p. 187, fig. 4, 19 (analog).
2. Крисилов Ю. Д. Автоматическа регулировка и стабилизаци усилени транзисторных схем, М., «Советское радио, 1972 г, стр. 172, рис. 4, 6 (прототип).2. Yu. D. Krisilov. Automatic adjustment and stabilization of amplification of transistor circuits, M., “Soviet Radio, 1972, p. 172, fig. 4, 6 (prototype).
«„“„