(54) УСТРОЙСТВО ДЛЯ ПОПЕРЕЧНО-СТРОЧНОЙ ЗАПИСИ И ВОСПРОИЗВЕДЕНИЯ(54) DEVICE FOR TRANSVERSE-LINE RECORDING AND PLAYBACK
нут переключатель 25, а в режиме «Воспроизведение - переключатель 24. При прохождепии полюса магнитопровода 9 под выступом 27 полюса 3 в обмотке 5 воспроизведени наводитс э.д. с. Из паведенпого сигнала в блоке 26 формируетс сипхроимпульс, поступаюш,ий через переключатель 25 па линию 14 задержки, с отводов которой управл ютс ключи 13 включепи информационных сигналов. Выходы всех ключей 13 объедин ютс па входе усилител 12 записи, с которого сигнал информации через обмотку 8 записи и полюса магнитопровода 9 записываетс на носитель 2.The switch is 25, and in the Playback mode, the switch 24. When the pole of the magnetic circuit 9 passes, under the ledge 27, the pole 3 in the winding 5 of the reproduction is induced by the ed. with. From the pededen signal in block 26, a sync pulse is generated, coming through a switch 25 on the delay line 14, the tapes of which control the keys 13 on the information signals. The outputs of all the keys 13 are combined on the input of the recording amplifier 12, from which the information signal through the recording winding 8 and the poles of the magnetic circuit 9 is recorded on the carrier 2.
В режиме «Воспроизведение при перемещении носител 2 и вращении ротора 4 магнитный поток с носител 2, пропорциональный записанному сигналу, измен ет магнитное состо ние ферритового магнитопровода 16, св занного с ротором 4 магнитной и механической (через подшипник 6) св з ми, и магнитное состо ние сердечника 28, вход щего в магнитомодул циопный узел 17. В узел 17, кроме сердечника 28, вход т сердечник 29, резисторы 30, генератор 31 и магнит 32 смещени . На выходе узла 17 по вл етс сигнал, который после детектировани фазовым детектором 18 поступает на ключи 22 воспроизведени и выделитель 20 управл ющих сигналов . Управл ющий сигнал выделител открывает ключ 21, и синхроимпульсы блока 26 через триггер 19 поступают на линию 23 задержки , с отводов которой устанавливаетс в исходное состо ние триггер 19 и управл ютс ключи 22 воспроизведени , разрешающие прохождение информации с детектора 18 на выход 33 устройства.In the Playback mode when the carrier 2 is moved and the rotor 4 rotates, the magnetic flux from the carrier 2 proportional to the recorded signal changes the magnetic state of the ferrite magnetic circuit 16 connected to the magnetic and mechanical rotor 4 (through the bearing 6) and the magnetic the state of the core 28 entering the magnet module node 17. The node 17, in addition to the core 28, includes a core 29, resistors 30, a generator 31, and a bias magnet 32. At the output of the node 17, a signal appears which, after detection by the phase detector 18, arrives at the keys 22 of the reproduction and the selector 20 of the control signals. The selector control signal opens the key 21, and the sync pulses of the block 26, via trigger 19, arrive at a delay line 23, from whose outlets the trigger 19 is reset, and the play keys 22 are controlled, permitting the passage of information from the detector 18 to the output 33 of the device.