SU34742A1 - Hand-operated motor debarking plow - Google Patents

Description

TonopHasf is the business forest's wilderness; no less labor intensive; what and clean debarking balances. The hatchet ham of propy, miner racks and other things long in terms of Scope of Work, by assignments to a much significant person; than the clean debarking of balances, so the mechanization of this equally labor-intensive work is of tremendous importance. To communicate rotation of the cutter when moving the plow along it and pressing the cutter on the cutting edge of the proposed manual control rod and rotating from motor chisel cartridge last performed; in the form of a conventional, incisal disc, the axis of which is provided with blunt cutting.

In the drawing of Fig 1 depicts a view

side of the motor. pork leg with

manual control; FIG. 2-view erQ

on top.,

Okorochny strug has the form of manual

cars on two wheels, body and

which are made of angular IU;

tgglla in average h, asti, over the axle of the wheels,

is set to /, and on the bottom,

several, unbent, ends of a wheelbarrow,

ball bearings installed

axle, on one end, mounted

pin 2, and on the other fastened the same way

 circular saw chisel 5,

 In the form of ordinary pesj pvoogo disk with slots for knives. Bent outwardly, the angle with an angle approximately to the part of the cut serves to fasten with screws the knives protruding from the other side of the disk having a somewhat conical shape. The middle part of the chuck axis 5, between the bearings, has a sharp screw thread 4. By means of a belt transmission to the pulley 2, the motor / causes the axis of the chuck chuck 3 to rotate. During the debarking, a part of the axis with screw thread 4 lies at the same angle and leads fero to slow rotation around its axis. In order to facilitate rotation, the flames are laid on two pairs of rollers 5.

The axis of the cartridge 3, besides the rotation of the log, drags the plow forward, and the worker has only to slightly help this movement Or even restrain erd in the required, beam x. In order to ensure reliable rotation, the rigidity of the motor should lie more on the axis of the cartridge 3, so that the latter press more firmly on the edge. The screw cutting of the axis of the cartridge 3, in addition, will always keep the disk with knives pressed to the edge, as the axis will tend to move to the left, and the disk will serve as a permanent obstacle to this displacement, as a result, the edge will rotate. Krles cars are moving on

two dienes, live parallel to the cr. The degree of debarking, i.e., coarse or clean, depends on the speed of the plow; what the car would go by-. more quickly, the flow of the skin is more fine, superficial, that is, coarse than the slower, the more deep, that is, pure, without remnants of the cortex. Work, see. Tr according to the needs and the task, leads with the speed, which corresponds to the speed of the plow and regulates it, guides the debarking. With coarse debarking, the groove of the plow will be, BW more, and with clean debarking, the production will be -. The value decreases accordingly.

It comes from the bottom.

Manually controlled motor debarking plank / equipped with lolu-. rotation of the cutting tool from the motor, characterized in that the axis of the cutting chuck J, made in the conventional cutting disk, is equipped with screws with a cut in order to inform the rotation of the axis of the axis when moving the plow along it and the shafts on the cut surface. -.

  Fig2