SU33763A1 - Irrigation device for greenhouses, etc. - Google Patents

Description

The proposed irrigation device for greenhouses is designed to avoid the need for a complex irrigation system of pipes and corresponding fittings, replacing it with a single chute and an instrument that moves water through the entire greenhouse and during this movement producing irrigation.

In FIG. 1 shows a view of a greenhouse consisting of several blocks; FIG. 2 is a cross-section of one block; FIG. 3 is a side view of it; FIG. 4- greenhouse plan; FIG. 5-cross-section of the greenhouse block with an irrigation device installed in it; FIG. 6 is a vertical section of the irrigation device; FIG. 7 view it from above.

The irrigation device is intended for greenhouses consisting of several blocks running across the total length of the greenhouse (Fig. 1-3). Irrigation water from any pumping installation or water supply system flows through the chol, reinforced under the roof of the greenhouse on the brackets (Fig. 5, 6). Zholob from one block comes out, describes a semicircle with a diameter equal to shi396

This is a block and it enters a neighboring block, as shown by the dotted line in FIG. four.

The irrigation device consists of a wheel a (fig. 6, 7) with an annular reservoir b and a vertical axis installed in frame g, which is rigidly connected to the axis of the traveling wheel e, placed in the water supply system. The annular tank b is equipped with spray nozzles in, folded in one direction, like Segnzrova wheels, with meshes placed at the ends. In the upper part of the tank b there are vanes like turbine blades. To supply water from the chute to the tank b, siphons are installed on the frame. The pressure of the water coming from the siphons on the vanes, and the reaction of the outflow of the jets from the nozzles into the wheel a with the reservoir b, is set in rotation to spray water (Fig. 5). Using the known gears mounted on the frame, not shown in the drawing, the rotation of the wheel and the running wheel e is used to communicate the translational movement to the device along the chute on the greenhouse block.

Pre, inventions.

An irrigation device for greenhouses and t, n., Characterized by the use of a wheel rotatably mounted in a frame g and an annular reservoir b equipped with spraying nozzles s bent to one side, like Segner's wheel, and vanes like turbine ones, which frame is rigidly connected with the e-wheel axle, placed in a watering gutter under the roof of a greenhouse, and equipped with a siphon for supplying water to the blades of the tank for spraying it and for communicating the rotational movement to the tank tupatelnogo entire device by using known Zholobov gear; gears from the wheel to the running wheel e.

..,. J

-Y, / .--, xxl f- (fnir.d

- - - - G7 ST h at h7

Fpl.)

7