SU27310A1 - Shoe wrapping pliers - Google Patents

Description

The proposed ticks are assigned to tension the top of the RBVU on the block and, at the same time, to secure it for one odd reception of the dachshunds; With this last goal, it is FROM the handles of the ticks, the keset, the spring drummer enclosed in the box with the ARMING PART and the trigger, the TSSS distributor in the form of a drum and of the same type.

. In FIG. Figure 1 shows a side view of ticks with one box steak removed; FIG. 2-VIEW on top of one of the parts.

Handles 1 to 2 ticks - one of them. the first one can be called a fixed one, and the second one - they stretch between themselves with a spring 3. The fixed handle / carries the box in which the mechanism for feeding clogging of the texts is enclosed. This mechanism consists, first of all, of a hammer 4 in the form of a rod, when a blow is passed through the vertical channel 5 to the box out of the box near the gripping jaws 24 and the upper end of the striker 6 slandered with the LONG shoulder, the latter is turned on the AXIS 7 lever loaded with a two-pointed spring 8; the short arm of the firing pin is exposed to the end of the 9th cranked (platoon) lever 9-U, pivoting on the axis 11 and located, in turn, by the end 10 under the action of the lever 12 connected with a link / 5 with a handle

2 ticks. At the end of the long arm of the firing pin 6 there is a spring pin 18 that falls when the firing pin of the firing pin is up (when it is cocked) into the hole in the box wall, made for fuse 79, connected to the hook 21 of the flexible TENSION 20 passing into the sleeve 22 handles / ticks.

The second part of the mechanism is a teck dispenser 14, representing (fig. 2) a drum equipped with a conical gear J, in the walls of which there are seven vertical holes 16 with channels 17 to them from the inner, between the walls and the hub, the cavity 35 of the drum, which includes the end of the inclined chute 23, supplying texes. The distributor 14 can be rotated on the AID 75 when the rod 25 stops (Fig. 1) connected to the cock-in lever 9-10 in ONE OF the seven teeth 26 (Fig. 2) placed on the end of the drum 14 hub.

The composition of the feeding mechanism of the mechanism ENTRIES, finally, the drum 27, filled with texes, which, with the help of the scoops rotating in it on the axis 28, are shifted to the receiving end of the above-mentioned tray 25, which enters the drum. connected by an endless chain:; (, with another star-wheel 31 on axis 32, on which the bevel gear sits

33, which engages with the toothed rim 34 of the distribution drum 14.

In order to tension the top of the shoe placed on the shoe, the edge of the skin is caught by the tongs 24 of the tongs during the compression of their handles. From the turn for this purpose of the movable handle 2, in addition to grasping the skin, the following occurs. The earring 13, acting through the arms of the arms 12, 10-9 and the short arm of the drummer 6, turns the long arm of the latter upwards (cocks the drummer), while compressing the spring 8, and brings up the box 4 from its vertical channel 5 in the box and from the drum the distributor 14. The pin-18 of the striker, having reached the corresponding guide on the wall of the box to the opening of the fuse 19, will enter this hole and, thus, will stop the striker 6 BG in the cocked position.

At the same time, from the rotation of the crank arm 9-10, the rod 25 associated with it, abutted against one of the teeth 26 on. the end of the hub of the distributor drum l4, will turn it to the seventh part of the circle. This rotation through the bevel gear coupling 34-33 and through the chain-connected star gears 31 and 29 is transmitted to the axle 28 If seated on it inside the tesco, drum 27 to the scoops, which, turning into the inner cavity of the drum distributor J4, pour the tekes into an inclined chute 23, and along it the texas are standing upright, heads up, where when the mouths of the channels / 7 approaching the end of the tray 23/7 (Fig. 2), the teks are transferred to them, one for each, using the flat sharp teksootdeliteli located at each channel . Transmitted in such a way, every second tex at the next turns of the drum J4 first falls through the channel / 7 into the hole / 6,

and then, when this hole of the drum becomes above the vertical channel 5, through which the hammer 4 passes in the tongs, the text falls into this channel, stopping at the bottom of it on the skin caught by the jaws of the tongs.

So, turning the movable handle 2 ticks, their compression, together with the capture of the skin, and the whole driving mechanism is alerted (cocked). When the skin is sufficiently tensioned, t is not unclasping the ticks, for the start it is a howl hook 2 /, which is why the fuse / 9 connected with it pushes the locking pin 18 of the striker 6 out of the hole, and the force of the pin The hammer 4, which stands at the bottom of the channel 5, tex and fixes the skin tightened on it.

The subject matter of the invention.

1. Pliers for dressing the top of the shoe, characterized in that they are provided with a text drum 27 connected by means of a tray 23 to the text dispenser 74, which is intended to supply tex to the hammer 4.

2. The form of execution of the ticks described in Clause 1, characterized by using the hammer 6 loaded with the spring 8, which is articulated by means of the lever 9-10 with the handle of the ticks 2,

3. the form of the implementation of the ticks described in paragraph 1, characterized in that for activating, the firing pin 6 is provided with a trigger 21, coupled by a pull 20 with a fuse 19.

4. The shape of the ticks described in Clause 1, characterized in that the text dispenser 14 is provided with channels 17 and holes 16.

to the author's testimony A. I.

Smirnova

3Sg 27310