Известны устройства дл измерени модул коэффициента отражени , содержащие генератор СВЧ, который через аттенюатор подключен к направленному ответвителю, снабл-:енному измерителем глубины модул ции СВЧ сигнала. Недостатком подобных устройств вл етс трудоемкость процесса измерени параметров элементов СВЧ-тракта.There are known devices for measuring a reflection coefficient modulus, comprising a microwave generator, which is connected via an attenuator to a directional coupler equipped with: a microwave modulation depth gauge. The disadvantage of such devices is the laboriousness of the process of measuring the parameters of the elements of the microwave path.
В предлагаемом устройстве этот недостаток устранен применением тройника, снабженного периодически поджигаемым разр дником, служащим дл получени короткого замыкани в двух сечени х измерительного тракта.In the proposed device, this disadvantage is eliminated by the use of a tee equipped with a periodically fired discharge unit, which serves to obtain a short circuit in two sections of the measuring path.
Пр моугольные импульсы с СВЧ-заполнением от генератора / СВЧ (см. блок-схему) через аттенюатор 2, включенный на его выходе, поступают на вход направленного ответвител 3. СВЧ-сигналы, прощедшие через ответвитель 3, достигают тройника 4 в плоскости Е. К выходному плечу тройника подключен исследуемый элемент 5. В плече Е тройника, нагруженном на линию 6, включен разр дник 7, периодически поджигаемый генератором импульсов 8. При поджиге разр дника его сопротивление падает. Малое сопротивление разр дника 7 трансформируетс к точке разветвлени тройника и обеспечивает прохождение сигнала к нагрузке. Сигнал, отраженный от нагрузки, достигает направленного ответвител 5 и поступает на вход детекторной головки Я выход которой соединен-с измерителем W глубины модул ции. При.холодном разр днйке его.1 сопротивление резко, возрастает. Это сопротивление трансформируетс к точке разветвлени тройника 4 и обеспечивает полное отражение СВЧ-сигнала, который через ответвитель поступает на вход детекторной головки -5. В результате поступлени на головку 9 сигналов , отраженнььЧ .от..исследуемого элемента 5 и тройника 4, на выходе детекторной головки будет получен сигнал с частотой, равной частоте повторени импульсов генератора. 7, гл.убина модул ции которых будет пропорциональна модулю коэффициента отражени исследуемого элемента 5. Значени модул определ ют по показани м измерител 0 глубины модул ции, выходной прибор которого может быть проградукрован непосредственно в единицах модул коэффициента отражени . Погрешность измерений в полосе частот пор дка 7% не превышает 10%.Rectangular pulses with microwave filling from the generator / microwave (see block diagram) through the attenuator 2 turned on at its output are fed to the input of the directional coupler 3. The microwave signals that have passed through the coupler 3 reach the tee 4 in the plane E. The test element 5 is connected to the output shoulder of the tee. In the shoulder E of the tee, loaded on line 6, the pattern 7 is turned on, periodically ignited by the pulse generator 8. When the pattern is ignited, its resistance drops. The low resistance of the arrester 7 transforms to the branch point of the tee and provides a signal to the load. The signal reflected from the load reaches the directional coupler 5 and enters the input of the detector head I, the output of which is connected to the meter W of the modulation depth. At the cold discharge of his. 1 resistance dramatically increases. This resistance is transformed to the branch point of the tee 4 and provides a full reflection of the microwave signal, which is fed through the coupler to the input of the detector head -5. As a result of signals arriving at the head 9, the reflection of CH. From the element under study 5 and the tee 4, a signal with a frequency equal to the pulse repetition frequency of the generator will be received at the output of the detector head. 7, the modulus of the modulation will be proportional to the module of the reflection coefficient of the element under study 5. The values of the module are determined by the readings of the modulation depth gauge 0, the output device of which can be graduated directly in units of the module of the coefficient of reflection. The measurement error in the frequency band in the order of 7% does not exceed 10%.
Предмет изобретени Subject invention
Устройство дл измерени модул коэффициента отражени , содержащее генератор СВЧ с аттенюатором на выходе, подключенным к направленному ответвителю, снабженному измерителем глубины модул ции , отличаюшеес тем, что, с целью автоматизации процесса измерений , направленный ответвитель соединен с исследуемой нагрузкой при помощи тройника, в плече Е которого, нагруженном на линию, включен периодически поджигаемый разр дник.A device for measuring a reflectance modulus module containing a microwave generator with an output attenuator connected to a directional coupler equipped with a modulation depth meter, characterized in that, in order to automate the measurement process, the directional coupler is connected to the test load using a tee in arm E which is loaded on the line, a periodically ignited arrester is switched on.