SU135019A1 - Label perforator - Google Patents

Description

A device is known for applying a perforated date on a label, including a nerforator, a non-distributor and a vacuum carriage with 1M vacuum pumps for feeding eth- ketki to the punch.

In the proposed device, in addition to the well-known, two vertically mounted butt-mounted cassette perforators are used, inside of which are mounted the pushers fixed on the pin of the central cylinder, which are equipped with shoe blocks. Such a constructive implementation of the device provides single-piece perforation of labels and prevents sticking of n.x other} tons to a friend.

FIG. I shows a diagram of the device; in fig. 2-device, type 3 plan; in fig. 3-system of pivot distributor, treadmill along arrow A in FIG. 2; pas figs. 4 is a section along BB in FIG. 3; in fig. 5-section but bb in FIG. 2

On the column / mounted pneumatic distributor, consisting of fixed disks 2 n 3 n of the movable disk 4, driven into rotation from the electric motor 5 through the belt irregular, reducer, gear 6 n toothed crown of the disk 4. Vacuum is supplied to the disk} 2 through fitting 7; through fittings 8 and 9, compressed air is supplied to disks 2 and 3. The movable disk 4 has two end channels 0 for distributing compressed air and one end channel // for vacuum distribution, the channels are closed by plugs J2 at the end of the disks, and holes are drilled from the side of the flat connector for these ports in these bodies; laid out against the corresponding grooves, Nsvodviz, V 135019-: 2

The discs 2 and 3. The vacuum inlets are connected to a vacuum pump (not shown), and the compressed air inlets are connected by a pipeline to the table 13, on which the air is located: filter 14, lubricator / L controller - Avlepi compressed air. A punch 77 is fastened on the U column, below and on the sides of which a vertical label supplying cassette 18 is installed; vertical cassette 18 is inserted for label labels with perforated dates; The tape cartridge / 5 and the short cassette / 9 have a similar design. On the bracket 20 attached to the column /, the nnevmonilpnd |) 21 is mounted, of which there is a pusher 23.

In Bepxnei, the body part is 1 mm, the cylinder 21 is located on the deck brake, switches on the cylinder 24, into which compressed air is inserted according to the cycle diagram; in the United States 24 rasno.yuzh nodnruzhinennp stock, nesun1nn na end of the block 2.7. The two side straps 26 and 21 of the preformed cassettes 1 are sliding, which can charge the etkketk cassette of different sizes that are spaced in the cassette in a stack and oriented along two fixed walls 28 and 29 (the labels have the same shape) L), shaped) .

For non-redesigned labels from the hearth (hoarfrost of cassette 18 to punch 77 and then into a conventional cassette 19c. Ethnographic transposing 30, including a perforation, P1ndr 31, movable carriage 32 with a pneumocystine - (7 n suction i4. Carriage: 12 prppe.tepa to njTOKy pnevmotslindra 31 and variable1) izontalno by parapl, im 36 p 37. Vaku m-prpssos 34 podzien1ep to the carriage on two nanravl kltsyh 38 n 39 with springs of 40 n 41, 1k) 34 Installed 5. Drinks at the top of the Kpainiee at the wedding.

The suction device 34. 11remep1, aemp in the lower position of the current circuit, 33, is equipped with two meters 42 and 43.

Prn stopping the ethnographic transference over the cassette 18 matches the 42 iipii label, the path is not 1 1c in this cassette, and COH; IO 43 to the perforated label is found in the perforation zoo. Zatom.m suction prnndnmaetsya, grabbing one label nz cassette 18 and perforant label (second sonlo.m). During the suction lift, the next label is fed to the bead level of the feeding cassette 18, after which the stem 22 with the pusher 23 is stopped (stopped). The spindle of the nepeMemeiniH carriage 32 nozzle 42 delivers the perforation label and the sonlo 43 sets the non-perforated label over and out | cassette 19. After the launch of the coH.io 42 with this streamline, it is attached to the co.-iy, and the sonlo 43 with the housed label to the stand labels, found 1.xc in the reception room | the cassette 19. At the same time, compressed air is supplied to the pneumatic chuck of the perforator 17 and a punched date is applied to the edge of the label; then the access of air to the airbag is blocked, the 1iidr of the perforator and its nrobone rises under the action of the spring, releasing the label.

After the air is switched, the NWM is disassembled.

Subject invention

A device for applying a perforated date on labels, vk.1Uchuyushchy punch, pneumatic dispenser and the carriage with a vacuum conveyor for feeding the labels to the perforator, oh, h and h and ni e its terms.

that, in order to perforate perforations of labels and prevent them from sticking to each other, use two vertically mounted on each side of the perforator cartridge, inside which mounted push-pull on the rod of the pneumatic cylinder, interacting with shoe brakes.

/four

JO

iSiiiJ 25-7:; K