Изобретение относитс к стабилизированным источникам питани с защитой . Известен стабилизатор с згиаитой от перегрузки по току и короткого Зё1мыкани а выходе, содержащий регулирук ций элемент,, датчик тока, тиристор и зёидитный транзистор flj. .Недостатками этого стабилизатора вл етс его сложность, низка надежность , значительна зависимость порога срабатывани устройства защиты от изменени температуры и низка помехозащищенность. Наиболее близким к изобретению вл етс стабилизатор напр жени посто нного тока с згццитой, содержащий последовательно включенный регулирующий элемент, измерительно-усилитель ный узел, токостабилизирующий двухполюсник и блок защиты, состо щий из транзистора , коллектор которо го через резистивный делитель подключен к минусовой шине, а эмиттер через диод - к входной плюсовой шине тиристора, управл ющий электрод кото рого подключен к средней, точке резистивного делител , включенного, меж ду входной плюсовой шиной и базой (транзистора защиты С2 . Однако этот стабилизатор имеет следующие недостатки: не обеспечивает защиты стабилизатора напр жени от перенапр жени на входе, регулирующий элемент не защищен от бросков тока, а при наличии стандартных дл данных схем узла защиты и узла огра- ничени тока, включенных последова .тедьно,не обеспечивает их синхронной работы и снижает КПД стабилизатора напр ени . Кроме того, стабилизатор имеет по ниженную надежность из-за перегрева регулирующего узла при длительной перегрузке, вызванного отсутствием полного закрывани регулирующего эле мента. Целью изобретени вл етс расширение функциональной возможности за счет защиты стабилизатора от перегрузки по току и от перенапр жени на входе, а также повышение надежности за счет обеспечени полного запирани регулирующего элемента. Поставленна цель достигаетс тем что в стабилизатор напр жени посто нного тока с защитой, содержащий последовательно включенные блок защиты , состо щий из ранзистора защиты, коллектор которого через резистивный делитель подключен к минусовой шине, а эмиттер через диод - к входной плюсовой шине, тиристора, управл ющий переход которого подключен к средней точке резистивного делител , балластного резистора, конденсатора и резис тора, включенного между входной плюсовой шиной и базой транзистора защиты , токостабилизирующий двухполюсник, регулирующий элемент с датчиком ограничени toKa и измерительно-усилительный узел, введены стабилитрон и дополнительный резистор, включенный мажду базой транзистора защиты и выходом датчика ограничител тока, при этом база регулирующего элемента подключена к аноду тиристора, который ; через стабилитрон н балластный резистор подключен к входной плюсовой шине , его катод - к минусовой шине, а конденсатор включен между базой транзистора защиты и плюсовой входной шиной . На чертеже приведена принципиальна схема предлагаемого устройства. Стабилизатор состоит из последовательно соединенных блока защиты 1, токостабилизирующего двухполюсника 2, регулирук цего элемента 3, соединенного с общей шиной управл ющей цепью через резистор 4, датчика ограничени 5 и измерительно-усилительного узла 6. Блок защиты 1 состоит из транзистора 7 защиты, коллектор которого через делитель на резисторах 8,9 подключен к общей шине, а база через резистор 10 с параллельно включенным конденсатором 11 подключена к плюсовой входной шине и через дополнительный резистор 12 подключена к выходу датчика узла ограничител тока 5. Эмиттер транзистора защиты 7 через полупроводниковый диод 13 подключен к плюсовой входной шиНе. Анод тиристора 14 блока зшциты 1 непосредственно соединен с выходом двухполюсника 2 и базой регулирующего элемента 3, а через стабилитрон 15 и балластный резистор 16 подключен к плюсовой входной шине. Катод тиристора 14 соединен с общей шиной, а управл ющий электрод его - с делителем из резисторов 8 и.9. - . Устройство работает следующим образом . При номинальном токе нагрузки и входном напр жении, не превышак цем допустимого, резистор 10 и резистор 12 поддерживают транзистор 7 в закрытом состо нии. В номинальном режиме работы ток через стабилитрон 15 практически отсутствует. При перегрузке или коротком замы- кании ограничитель тока 5 запирает регулирующий элемент 3 до уровн тока ограничени и напр жение на выходе :; стабилизатора уменьшаетс , при этом напр жение между входной и выходной шиной увеличиваетс . Аналогичный процесс происходит при увеличении входг ного напр жени , блок защиты 1 сраба тывает, что обеспечивает увеличение напр жени на резисторе 10 и отпирание транзистора 7, вследствие чего через делитель на резисторах 8, 9This invention relates to stabilized power supplies with protection. A stabilizer with an overcurrent protection and a short circuit and an output is known, which contains an element, a current sensor, a thyristor, and a flj interface transistor. The disadvantages of this stabilizer are its complexity, low reliability, a significant dependence of the response threshold of the temperature protection device and low noise immunity. Closest to the invention is a zgczite DC voltage regulator, containing a series-connected regulating element, a measuring and amplifying unit, a two-pole current-stabilizing unit and a protection unit consisting of a transistor, the collector of which is connected to a minus bus through a resistive divider. the emitter through the diode is connected to the input plus bus of the thyristor, the control electrode of which is connected to the middle point of the resistive divider connected between the input plus bus and the base (transistor C2 protection. However, this stabilizer has the following disadvantages: it does not protect the voltage regulator against overvoltage at the input, the regulating element is not protected from inrush current, and if there are standard protection circuits and a current limit node connected sequentially for these circuits. It does not ensure their synchronous operation and reduces the efficiency of the voltage regulator. In addition, the stabilizer has a lower reliability due to overheating of the regulating unit during long-term overload caused by the lack of complete closing of the regulator ulyuleva element The aim of the invention is to enhance the functionality by protecting the stabilizer against overcurrent and overvoltage at the input, as well as increasing reliability by ensuring complete locking of the regulating element. The goal is achieved by the fact that the DC voltage regulator with protection, containing a series-connected protection unit consisting of a protection transistor, whose collector is connected to the minus bus through a resistive divider, and the emitter through the input plus bus, thyristor, the transition of which is connected to the midpoint of the resistive divider, ballast resistor, capacitor and resistor connected between the input plus bus and the base of the protection transistor, current-stabilizing bipolar The IR, the regulating element with the toKa limiting sensor and the measuring and amplifying node, introduced a Zener diode and an additional resistor connected between the base of the protection transistor and the output of the current limit sensor, while the base of the regulating element is connected to the thyristor anode, which; through the Zener diode n the ballast resistor is connected to the input plus bus, its cathode is connected to the minus bus, and a capacitor is connected between the base of the protection transistor and the plus input bus. The drawing shows a schematic diagram of the proposed device. The stabilizer consists of a series-connected protection unit 1, a current-stabilizing two-terminal 2, an adjusting element 3 connected to a common control circuit bus through a resistor 4, a limitation sensor 5 and a measuring and amplifying node 6. The protection unit 1 consists of a protection transistor 7 whose collector through a divider on resistors 8.9 connected to the common bus, and the base through a resistor 10 with a parallel connected capacitor 11 is connected to the positive input bus and through an additional resistor 12 connected to the output of the node sensor current limiter 5. The emitter of the protection transistor 7 through the semiconductor diode 13 is connected to the positive input bus line. The anode of the thyristor 14 of the block 1 is directly connected to the output of the two-terminal 2 and the base of the regulating element 3, and through the zener diode 15 and the ballast resistor 16 is connected to the positive input bus. The thyristor cathode 14 is connected to a common bus, and its control electrode is connected to a divider of resistors 8 and 9. -. The device works as follows. At a rated load current and input voltage not exceeding the allowable one, the resistor 10 and resistor 12 keep the transistor 7 in the closed state. In the nominal mode of operation, the current through the zener diode 15 is practically absent. In case of overload or short circuit, the current limiter 5 closes the regulating element 3 to the level of the limiting current and the output voltage:; the stabilizer decreases as the voltage between the input and output bus increases. A similar process occurs when the input voltage increases, the protection unit 1 trips, which provides an increase in the voltage on the resistor 10 and the unlocking of the transistor 7, as a result, through a divider on the resistors 8, 9
3 106112343 10611234
потечет ток. Повышение напр жени с на общуюшину, регулируюна резисторе 9 вызывает включение ти- ВДИй элемент3 полностью з ристора 14. База регулирук дего эле- пираетс иток через него неcurrent flows. Increasing the voltage across the common point, the regulating resistor 9 causes the TI element 3 to turn on completely of the resistor 14. The base of the regulator is controlled by a voltage not
мента 3 через тиристор 14 замыкает- протекает. ment 3 through the thyristor 14 closes - flows.