Lochstreifensender, bei dem die Sendeeinrichtung erst bei Erreichung
der Nenndrehzahl des .Antriebsmotors zur Wirkung kommt Bei Übermittlung von Nachrichten,
beispiels-,veise in der Telegrafentechnik, wenden zur vollen Ausnutzung der Telegrafiergeschwindigkeit
die Nachrichten üblicherweise in einen Lochstreifen gestanzt, später in Lochstreifensendegeräten
abgetastet und ausgesandt. Zu diesem Zweck wird der Lochstreifen in ein Abtastorgan
eingelegt und der Motor eingeschaltet. Das Sendeorgan wird erst eingeschaltet, wenn
-der Motor seine volle Drehzahl erreicht hat. Dadurch ist gewährleistet, daß schon
die ersten zur Aussendung gelangenden Zeichen zeitlich die richtige Länge haben,
also umverzerrt sind.Perforated tape transmitter in which the transmitting device is only activated when it is reached
the nominal speed of the drive motor comes into effect When messages are transmitted,
For example, in telegraph technology, turn to full utilization of the telegraph speed
the messages are usually punched into a punched tape, later in punched tape transmitters
scanned and sent out. For this purpose, the punched tape is inserted into a scanner
inserted and the engine switched on. The transmitting organ is only switched on when
-the engine has reached its full speed. This ensures that already
the first characters to be sent have the correct length in terms of time,
are redistorted.
Es hat sich aber als nachteilig erwiesen, Motor und Sendeorgan getrennt
einzuschalten, weil .durch Bedienungsfehler Betriebsstörungen entstehen, nämlich
dann, wenn erst das Sendeorgan eingeschaltet wird und dann der Motor, nachdem der
Lochstreifen eingelegt .ist. Hierdurch werden die ersten Zeichen in die Länge gezogen,
und es entstehen Textverstümmelungen, die besonders unangenehm sind, weil es sich
meist um die Telegrafierzeichen, Wagenrücklauf, Neue Zeile, Umstellung auf Buchstaben
u.,dgl. 'handelt, die für eine größere Anzahl nachfolgender Zeichen von Wichtigkeit
sind.However, it has been found to be disadvantageous to separate the motor and transmitter organ
to be switched on, because operating errors result in malfunctions, namely
when the transmitter is switched on and then the motor after the
Punched tape is inserted. This will stretch the first characters,
and text mutilation occurs, which is particularly uncomfortable because it is
mostly around the telegraph characters, carriage return, new line, conversion to letters
and the like 'acts that are of importance for a large number of subsequent characters
are.
Es hat sich daher als zweckmäßig erwieset, Lochstreifensender-Einrichtungen
zu schaffen, bei dienen nur ein Bedienungsknopf zu betätigen ist und bei denen die
Vorgänge innerhalb des Gerätes dann
automatisch in der richtigen
Reihenfolge aiblaufen. Es sind Einrichtungen 'bekannt bei denen nach" Einschalten
des Gerätes der Motor sich zu drehen beginnt und Idas Sendeorgan ebenfalls bewegt.
Damit-durch das Bewegen, des. Sendeorgans und Betätigen der Sendekontakte keine
Impulse auf die Telegrafierleitung gehen können, wird der Telegräfierkreis so lange
kurzgeschlossen, bis der Motor seine volle Drehzahlerreicht hat. Die bekanntem Einrichtungen
zu diesem Zweck sind so aufgebaut, daß ein von einem Nocken gesteuerter Kontakthebel
von einem fliehkraftgesteuerten Organ so lange gesperrt gehalten wird, bis die Fliehgewichte
den Sperrhebel wegziehen und der Kontakthebel einen die Sendeleitung überbrückenden
Kontakt öffnet. Durch den mittels des Nockens gesteuerten Kontakthebel ist gewährleistet,
daß das Öffnen und Schließen dieses Kontaktes nur im Stopschritt erfolgen kann.
Nac'hteillig an dieser Anordnung ist jedoch, daß die Nockenscheibe den Kontakthebel
bei jeder Umdrehung bewegt, d. h., d.aß während jeder Umdrehung einmal der Kontakt
für eine gewisse Zeit geschlossen wird. Hebel und Kontakte unterliegen dadurch der
Abnutiung, da sie ja für die Dauer der Sendung nicht benötigt werden. Außerdem muß
der Kontakt sehr sauber arbeiten.It has therefore proven expedient to use punched tape transmitter devices
to create, when only one control button has to be pressed and where the
Processes within the device then
automatically in the correct
Run out of order. There are facilities 'known to those after' switch on
of the device, the motor begins to turn and Ida's transmitter also moves.
So-by moving the. Sending organ and actuating the sending contacts none
Pulses can go on the telegraph line, the telegraph circle will be so long
short-circuited until the motor has reached its full speed. The well-known facilities
for this purpose are constructed in such a way that a contact lever controlled by a cam
is kept locked by a centrifugal force-controlled organ until the flyweights
Pull the locking lever away and the contact lever bridges the transmission line
Contact opens. The contact lever controlled by the cam ensures that
that the opening and closing of this contact can only take place in the stop step.
Another aspect of this arrangement is that the cam disk acts as the contact lever
moved with each revolution, d. i.e., there was once contact during each revolution
will be closed for a period of time. Levers and contacts are thereby subject to the
Wear and tear, as they are not needed for the duration of the broadcast. Also must
the contact work very neatly.
Zur Vermeidung dieses Nachteils wird nach der Erfindung dieser Kontakt
an die Stelle gelegt, an der der Abtast- und Transportvorgang durch eine Kupplung
gesteuert wird. Erfindungsgemäß wird dieser Kontakt von dem Kuppl,izngshebel des
Sendeorgans betätigt. Da die Kupplung nur entweder ein- oder ausgerückt sein kann,
wobei das Ein: oder Ausrücken stets nur im Moment des Stopschrittes erfolgen darf,
ist gewährleistet, daß das Betätigen des sperrenden Kontaktes nur bei Beginn und
Ende jeder Lochstreifensendung erfolgt.In order to avoid this disadvantage, this contact is made according to the invention
placed at the point at which the scanning and transport process by a coupling
is controlled. According to the invention, this contact is made by the coupling lever of the
Transmitter operated. Since the clutch can only be either engaged or disengaged,
whereby the engagement: or disengagement may only take place at the moment of the stop step,
it is guaranteed that the blocking contact is only activated at the start and
At the end of each punched tape shipment.
Eine beispielsweise Ausführungsform des Erfindungsgedankens wird an
Hand der Abbildung beschrieben: Ist der Lochstreifen 17 im Lochstreifensender
eingelegt, so daß die Zähne des Transportrades 14 ihn transportieren können, so
bewirkt nach Einschalten eines Bedienungskrnopfes der nicht dargestellte Antrieb
eine dauernde Drehung der Sendewelle 9 mit der Fortschalltkurve 8 in Pfeilrichtung.
Solange die Geschwindigkeit des Motors noch nicht die vorgeschriebene Größe erreicht
hat, sorgt ein nicht ,dargestellter Kraftmagnet mit-seinem Anker dafür"daß der Kupplungshebel
i durch seine Feder 3 .in der dargestellten Weise gehalten wird, d. h. daß der in
der Führung 5 beweglich gelagerte Gleitstein 4 mit seiner Erhöhung 16 direkt unter
dem waagerechten Schenkel 7 des Fortsehalthebels 6 liegt. Dadurch, daß in dieser
Lage zwisch,en dem Lappen 15 des Kupplungshebels i und dem Betätigungspmpel 18 des
Federsatzos.2 ein Zwischenraum besteht, sind die Kontakte i9 und 2o des Federsatzes
:2 geschlossen. Dadurch wird bewirkt, daß die Sendekontakte des Lochstreifensenders
kurzgeschlossen sind, so daß 'keine Unterbrechung. der Telegrafierleitung entstehen
kann. Hat der. Motor seine volle Geschwindigkeit er= reicht, so versucht der nicht
dargestellte Kraftmagnet den Kupplungshebel i entgegen der Zugfeder 3 aus der dargestellten
Lage herauszuziehen. Dies kann jedoch erst geschehen, wenn ,die Rolle io des Fortschalthebels
6 .auf dem 'höchsten Punkt 2 1 der Fortsclialtkurve 8 angelangt .ist, das ist im
Zeitrauen des S.topschrittes,, bei dem ohnehin, die Telegrafierleitun:g durch den.
'Sendestopkontakt abgeschlossen ist. Dadurch kann die Nase 22 der Erhöhung 16 des.
Gleitsteines 4 unter dem waagerechten Schenkel 7 des Fortschalt'hebels 6 hinweggleiten.
Durch Bewegung des Kupplungshebels i schwenkt. der Lappen 15 und drückt dabei den
Pimpel 18, so daß die Kontakte ig und 2o des Federsatzes 2 geöffnet werden.An example embodiment of the inventive idea is described with reference to the figure: If the punched tape 17 is inserted in the punched tape transmitter so that the teeth of the transport wheel 14 can transport it, the drive, not shown, causes the transmission shaft 9 to continuously rotate with the propagation curve after switching on an operating button 8 in the direction of the arrow. As long as the speed of the motor has not yet reached the prescribed level, a force magnet (not shown) with its armature ensures that the clutch lever i is held in the manner shown by its spring 3, that is to say that the one movably mounted in the guide 5 Sliding block 4 with its elevation 16 lies directly under the horizontal leg 7 of the holding lever 6. Because there is a gap in this position between the tab 15 of the coupling lever i and the actuating bell 18 of the spring set 2, the contacts i9 and 2o are of the spring set: 2 closed. This has the effect that the transmission contacts of the perforated tape transmitter are short-circuited so that the telegraph line cannot be interrupted. When the motor has reached its full speed, the force magnet (not shown) tries to counteract the clutch lever pull the tension spring 3 out of the position shown, but this can only happen when the roll e io of the indexing lever 6. has reached the 'highest point 2 1 of the continuation curve 8, that is in the roughness of the top step, in which the telegraph line through the. 'Send stop contact is complete. As a result, the nose 22 of the elevation 16 of the sliding block 4 can slide under the horizontal leg 7 of the indexing lever 6. By moving the clutch lever i pivots. the tab 15 and presses the pimple 18 so that the contacts ig and 2o of the spring set 2 are opened.
Nach Beendigung .dieses Vorganges hat sich die Sendewelle 9 ,so weit
weitergedreht, daß inzwischen die nicht dargestellten Abfüllhebel den. Lochstreifen
abfühlen und entsprechende Telegrafierzeichen in, folge der nunmehr freien Telegrafierleitung
aussenden können. Gleichzeitig .ist die Rolle io unter Wirkung der Zugfeder z3 des
Fortschalthebels 6 auf den kleineren Durchmesser der Fortsc'haltkurve 8 gerollt.
Diese Bewegung bewirkt, daß das Verbindungsstück ii den Hebel i2 mitnimmt und .die
Klinke 13 mit der Schräge 24 über den nächsten Zahn, z. B. 25, hinweggeglitten
ist. Bei weiterer Drehung der Sendewelle 9' und Nockenscheibe 8 rollt die Rolle
io die Fläche 26 hinauf und drückt über das Verbindungsstück i i und. den. Hebel
12, die Klinke 13 :gegen den Zahn 25 .des Forts.chaltrades 14, so daß sich. das
Fortschaltradj 14 in. Pfeilrichtung gerade um eine Lochteilung -Weiter bewegen kann
.'und den Lochstreifen 17 um - einen Schritt weiter transportiert. Dies ist
erfolgt, wenn die Rolle io den höchsten Punkt 2i der Fortschaltkurve 8 ,gerade überschreitet
und .der waagerechte Schenkel 7 .des. Fortschalthebels 6 so weltgehoben ist, daß
Luft -zwischen seiner Unterkante und: dem Ansatz 22 des Gleitsteines 4 besteht.
Sofern der nicht -dargestellte Kraftmagnet den Kupplungshebel i jetzt nicht bewegt,
bewegt sich. der Schenkel 7 am Gleitstein 4 vorbei abwärts, so daß über das Verbindungsstück
ii und dem Hebel 12 die Klinke 13 erneut hinter den nächsten Zahn fassen kann und
für den nächsten Transport des Lochstreifens vorbereitet isst. Dieser Vorgang wiederholt
sich so lange, bis der Kupp-lungghebel i vom Kraftmagneten bewegt wird. Durch den
Ansatz 22 kann im Stopschiitt der Gleitstiein 4 mit der Erhöhlung 16 dann unter
den waagerechten Schenkel 7 des Fortschalthebels 6 springen. Dadurch wird wieder
bewirkt, daß die Kontakte Beis Federsatzes 2 geschlossen werdlen., der Telegrafierstromkreis
somit kurzgeschlossen wird, kein Zeichen mehr auf die Leitung gegeben wird und der
Transport des Lochstreifens »aufhört.After completion of this process, the transmission shaft 9 has rotated so far that meanwhile the filling lever, not shown, the. Feel the punched tape and send out the corresponding telegraph characters, following the telegraph line that is now free. At the same time, the roller 10 is rolled onto the smaller diameter of the continuation curve 8 under the action of the tension spring z3 of the indexing lever 6. This movement causes the connecting piece ii to take the lever i2 with it and .the pawl 13 with the bevel 24 over the next tooth, e.g. B. 25, has slipped away. With further rotation of the transmission shaft 9 'and the cam disk 8, the roller io rolls up the surface 26 and presses over the connecting piece ii and. the. Lever 12, the pawl 13: against the tooth 25 .des Forts.chaltrades 14, so that. the progressing wheel 14 can move in the direction of the arrow just by one hole division and the punched tape 17 is transported one step further. This is done when the role io just exceeds the highest point 2i of the indexing curve 8 and .the horizontal leg 7 .des. Shift lever 6 is so worldly that air -between its lower edge and: the approach 22 of the sliding block 4 exists. If the force magnet (not shown) now does not move the clutch lever i, it moves. the leg 7 past the sliding block 4 downwards, so that the pawl 13 can again grasp behind the next tooth via the connecting piece ii and the lever 12 and eats prepared for the next transport of the perforated tape. This process is repeated until the clutch lever i is moved by the force magnet. Through the projection 22, the sliding part 4 with the elevation 16 can then jump under the horizontal leg 7 of the indexing lever 6 in the stopping position. This has the effect that the contacts at spring set 2 are closed again, the telegraph circuit is short-circuited, no more signals are given on the line and the transport of the perforated tape stops.