Verfahren zur Aufbereitung nichtmetallischer Mineralien nach dem Schwimmverfahren
Fs ist bereits vorgeschlagen worden, Rolisulfatterlxetitinöl, das bei der Sulfatzellstoftgewinnung
anfällt, als Ausgangsstoff für die Herstellung von Schäumerölen für die Schwimmaufbereitung
zu verwenden. Ein Vorschlag geht dahin, das Roh sulfatterpentinöl mit einer geringen
Menge eines Nletallclilorids in der Wärme zu polymerisieren.Process for processing non-metallic minerals using the swimming process
Rolisulfatterlxetitinöl, which is used in the production of sulfate pulp, has already been proposed
accrues as a raw material for the production of foaming oils for swimming pool treatment
to use. One suggestion is to use the crude sulfate turpentine with a low
Amount of a metal chloride to polymerize in the heat.
In nicht vorauszusehender Weise hat sich nun herausgestellt, daß das
verhältnismäßig leicht flüchtige Rolisulfatterpentitiöl Sammlereigenschaften aufweist,
wenn es höher polymerisiert ,wird und teilweise oder ganz der Sulfonierung unterworfen
wird. Dieses sulfonierte höhere Polvmerisat des Rohstilfatterpentinöles kommt ,ganz
besonders als Sammleröl für die Schwimmaufbereitung von nichtmetallischen Mineralien,
wie Flußs.pat, Schwerspat, Kryolith u. dgl. in Frage. Als ein besonderer Fortschritt
muß es bezeichnet werden, daß in dem sulfonierten Rohsulfatterpentinölpolymerisat
ein Schwimmittel gefunden worden ist, das aus einheimischen Rohstoffen hergestellt
wird und als vollwertiger Ersatz für die zur Zeit knappen höheren Fettsäure- oder
Fettalkoholsulfonate Verwendung finden kann.In an unforeseeable way it has now been found that the
has relatively volatile rolisulfatterpentitiöl collector properties,
if it polymerizes to a higher degree, it is partially or wholly subjected to sulfonation
will. This sulfonated higher polymer of raw stiletto turpentine comes whole
especially as a collector oil for the swimming pool treatment of non-metallic minerals,
such as fluorspar, barite, cryolite and the like. As a special step forward
it must be indicated that in the sulfonated crude sulfate turpentine oil polymer
a float has been found made from local raw materials
and as a full replacement for the currently scarce higher fatty acid or
Fatty alcohol sulfonates can be used.
Die Herstellung der Sammleröle für Schwimmaufbereitungszwecke aus
dem Rohsulfatterpentinöl erfolgt auf folgende Weise; Das Rohsulfatterpentinöl wird
nach bekanntem Verfahren unter Zusatz von Metallchloriden polymerisiert, jedoch
wird die Polymerisation durch
Verwendung höherer Zusatzmengen an
polymerisierend wirkenden Mitteln im Gegensatz zu der Schäumerölherstellung so weit
getrieben., daß Polymerisationsprodukte von einem spezifischen Gewicht von
0,93 bis o,9.6 erhalten werden. Diese Polymerisationsprodukte werden je nach
Bedarf mit der Hälfte der gleichen oder vielfachen Menge Schwefelsäure bei mäßiger
Temperatur sulfoniert. Nach beendeter Reaktion wird das Sulfonierpngsprodukt ausgewaschen
und mit Alkali neutralisiert. Man erhält als Endprodukt ein leicht in Wasser emulgierbares
dickflüssiges 01, das ein gutes Sammleröl für die Schwimmaufbereitung darstellt.The production of collector oils for swimming purposes from the raw sulphate turpentine takes place in the following way; The crude sulphate turpentine oil is polymerized according to a known process with the addition of metal chlorides, but the polymerization is driven so far by using higher added amounts of polymerizing agents in contrast to the foaming oil production that polymerization products with a specific gravity of 0.93 to 9.6 are obtained . These polymerization products are sulfonated with half the same or a multiple amount of sulfuric acid at a moderate temperature, as required. After the reaction has ended, the sulfonation product is washed out and neutralized with alkali. The end product obtained is a viscous oil that can be easily emulsified in water and is a good collector oil for swimming pool treatment.
Zur Erläuterung .der Wirkung des sulfonierten Rohsulfatterpentinölpolymerisats
als Sammleröl bei der Schwimmaufbereitung seien folgende .Beispiele angeführt Beispiel
i Ein quarz- und barythaltiges Flußspaterz aus (lern Schwarzwald wurde nach Vermahlung
auf unter o,12 mm flotiert. Dabei wurde in Versuch a mit 5oo g Soda/t und
670 g Ricinolsulfonat/t Roherz und in Versuch b mit dergleichen Menge Soda
und 670 g sulfoniertem Rohsulfatterpentinölpolymerisat gearbeitet. Dabei wurden
erhalten:
1» mit sulfoniertemRohsulfat-
terpentinö1po1ymerisat
Gewichts Ausbr.
Produkt prozent
CaF2 °/o kg 11
Konzentrat... 52,8 94,2 49,8o 89,7
:Mittelprodukt 2o,4 26,2 5.35 9,5
Berge . . . . . . . . 26,8 1,6 o.43 o,8
Roherz ...... , ioo,o I 55,2 I (55,58) I 100,0
Die Daten geben eindeutig zu erkennen, daß das aus (lrm Rohsulfatterpentinöl nach
dem beschriebenen Verfahren gewonnene Sammleröl ein ausgezeichnetes Flußspatflotationsmittel
darstellt. Mit Hilfe des neuen Sammleröles konnten sogar die mit Ricinolsulfonat
erreichten Anreicherungs-und Ausbringenswerte übertroffen werden. Es sei erwähnt,
daß Ricinolsulfonat als eines der besten Sammleröle für die Flußspatflotation bekannt
ist. Beispiele Eindeutsches Baryterz wurde auf unter o,10 mm aufgemahlen und vergleichsweise
unter Verwendung won Natriumoleat und sulfoniertem Rohsulfatterpentinölpolymerisat
bei gleichen Zusatzmengen flotiert. Dabei wurden folgende Ergebnisse erzielt:
Auch für die Schwerspatflotation eignet sich das nach dem beschriebenen Verfahren
hergestellte neue Sammleröl als Schwimmaufbereitungsmittel. Im Verlauf weiterer
Versuche konnte noch festgestellt werden, daB auch Lithiumglimmer, Kryolith und
andere Mineralien mit dem sulfonierten Rohsulfatterpentinölpolymerisat flotiert
werden können. Der Mengenverbrauch bewegt sich zwischen o,3 bis i kg je nach der
zu flotierenden Erzart.To explain the effect of the sulphonated crude sulphate turpentine oil polymer as collector oil in the treatment of swimming pools, the following examples are given: Example i A quartz and barite-containing river spar ore from (Learn Black Forest was floated after grinding to less than 0.12 mm. In experiment a, 500 g of soda / t and 670 g ricinol sulfonate / t raw ore and in test b with the same amount of soda and 670 g sulfonated crude sulfate turpentine polymer.
1 »with sulphonated crude sulphate
turpentine oil polymer
Weight outbreak
Product percent
CaF2% kg 11
Concentrate ... 52.8 94.2 49.8o 89.7
: Middle product 2o, 4 26.2 5.35 9.5
Mountains . . . . . . . . 26.8 1.6 o 43 o.8
Raw ore ...... , ioo, o I 55.2 I (55.58) I 100.0
The data clearly show that the collector oil obtained from crude sulphate turpentine according to the process described is an excellent fluorspar flotation agent. With the help of the new collector oil, even the enrichment and output values achieved with ricinol sulfonate could be exceeded. It should be mentioned that ricinol sulfonate is one of the best collector oils for fluorspar flotation is known.Examples German barite ore was ground to less than 10 mm and comparatively floated using sodium oleate and sulfonated crude sulfate turpentine oil polymer with the same added amounts. The following results were obtained:
The new collector oil produced by the process described is also suitable as a flotation treatment agent for heavy spar flotation. In the course of further experiments it was found that lithium mica, cryolite and other minerals can also be floated with the sulphonated crude sulphate turpentine oil polymer. The volume consumption ranges from 0.3 to 1 kg depending on the type of ore to be floated.