Nummernscheiben-Stromstoßgeber, vorzugsweise für Münzfernsprechapparate
Vorzugsweise in Münzfernsprechapparaten werden Nummernscheiben-Stromstoßgeber verwendet,
die mit Sperreinrichtungen versehen sind, welche einerseits die Nummernwahl beschränken,
anderers-its bei einer unzulässigen Bedienungsweise der Einrichtung das Zustandekommen
einer Sprechverbindung völlig verhindern. Eine Sperrvorrichtung bewirkt beispielsweise,
daß bei der Wahl bestimmter Ziffern (meistens der Null oder der Neun) eine Klinke
einfällt, die einen Kontakt betätigt, so daß von da ab keine Aussendung von Wählimpulsen
mehr möglich ist. Diese Schaltklinke fällt aber nur dann ein, wenn die verbotene
Ziffer bei der ersten oder den beiden ersten Impulsaussendungen eingestellt wird,
während sie bei der Einstellung dieser Ziffer bei späteren Wählvorgängen am Einfallen
verhindert wird. Eine andere Sperreinrichtung sperrt ebenfalls die Aussendung von
Wählimpulsen, und zwar dann, wenn die selbstablaufende Nummernscheibe in ihrem Ablauf
gehemmt, also gebremst oder angehalten wird. Hierfür wird bei bekannten Ausführungsformen
die Bremsspindel benutzt, die den Geschwindigkeitsregler trägt, der den gleichmäßigen
Ablauf der Nummernscheibe über den gesamten Zahlenbereich bewirken soll. Die Bremsspindel
ist mit einer Schnecke versehen, an der :sie von einem Zahnrad angetrieben wird.
Die Antriebskraft erzeugt außer der Drehbewegung auch einen Schub in der Richtung
der Spindelaehse. Die Bremsspindel ist in axialer Richtung
gegen
die Kraft einer Feder zwischen zwei Anschlägen beweglich gelagert. Solange die Antriebskraft
in ihrer vollen Größe vorhanden ist, wird die Bremsspindel in ihrer Achsrichtung
nach der einen Seite gedrückt, während sie sich beim Nachlassen oder Aufhören der
Antriebskraft nach der anderen Seite bewegt und hierbei einen Kontakt betätigt,
der die Aussendung von Wählimpulsen unterbindet, indem er entweder als Schließkontakt
den die Impulse erzeugenden Kontakt überbrückt . oder als Öffnungskontakt den Impulskontakt
abschaltet: Bei beiden erwähnten Sperreinrichtungen bleiben die von ihnen betätigten
Kontakte zufolge des Einspringens einer Falle so lange in der Betätigungsstellung,
bis diese Falle über ein mit dem Gabelumschalter gekoppeltes Hebelgestänge beim
Auflegen des Handhörers auf den Fernsprechapparat wieder ausgeklinkt wird.Dial impulse generator, preferably for coin operated telephones
Dial-type pulse generators are preferably used in coin-operated telephones,
which are provided with blocking devices, which on the one hand restrict the number dialing,
on the other hand, the occurrence of an inadmissible manner of operation of the facility
completely prevent a voice connection. A locking device has the effect, for example,
that when choosing certain digits (mostly zero or nine) a latch
occurs, which actuates a contact, so that from then onwards no dialing pulses are transmitted
more is possible. This pawl only engages when the forbidden
Digit is set for the first or the first two pulse transmissions,
while they are at the fore when setting this digit in later dialing operations
is prevented. Another blocking device also blocks the transmission of
Dialing pulses, namely when the self-decelerating dial is in its run
is inhibited, i.e. braked or stopped. For this purpose, in known embodiments
uses the brake spindle that carries the speed controller that makes the smooth
The sequence of the dial over the entire range of numbers. The brake spindle
is provided with a worm on which: it is driven by a gear.
In addition to the rotary movement, the driving force also generates a thrust in the direction
the spindle axis. The brake spindle is in the axial direction
against
the force of a spring mounted movably between two stops. As long as the driving force
is available in its full size, the brake spindle is in its axial direction
pressed to one side while releasing or stopping the
Driving force moves to the other side and actuates a contact,
which prevents the transmission of dialing pulses by either acting as a closing contact
bridges the contact generating the pulses. or the impulse contact as opening contact
switches off: With both of the blocking devices mentioned, those operated by them remain
Contacts in the actuated position as long as a trap has jumped in,
until this case via a lever linkage coupled to the hook switch
Placing the handset on the telephone set is disengaged again.
Bei den bisherigen Konstruktionen arbeiten die beiden Sperreinrichtungen
auf je einen besonderen Kontakt, und dementsprechend mußten auch von der durch den
Gabelhebel beim Auflegen des Fernhörers betätigten Hebeleinrichtung zwei verschiedene
Fallen ausgeklinkt werden. Gemäß der Erfindung tritt eine wesentlich bauliche Vereinfachung
und eine wesentliche Ersparnis an Platzbedarf dadurch ein, daß beide Sperrvorrichtungen
auf denselben Kontakt arbeiten. Bei der neuen Konstruktion sind also der die Impulsaussendung
sperrende Kontakt und die diesen Kontakt in seiner Betätigu igsstellung 'haltende
Falle sowie die die Falle wieder ausklinkende Hebeleinrichtung nur einmal vorhanden.In the previous designs, the two locking devices work
to a special contact each, and accordingly also had to go through the
Fork lever when hanging up the receiver operated lever device two different
Traps are notched. According to the invention, there is a substantial structural simplification
and a substantial saving of space in that both locking devices
work on the same contact. With the new design, these are the pulse transmission
blocking contact and the one that keeps this contact in its actuating position
Trap and the lever device releasing the trap again only exist once.
Die Abbildung zeigt in schematischer Perspektive und beispielhaft
die für die Erfindung wesentlichen Teile eines Nummernscheiben-Stromstoßgebers und
deren erfindungsgemäße Anordnung.The figure shows in a schematic perspective and as an example
the essential for the invention parts of a dial pulse generator and
their arrangement according to the invention.
i ist die Nummernscheibe, die über die Achse 2, wie nicht weiter dargestellt,
den Impulsgebekontakt betätigt und mittels eines Zahnrades die den Geschwindigkeitsregler
G tragende Bremsspindel 3 an der Schnecke S antreibt. Die Bremsspindel 3 wird durch
die Antriebskraft in ihrer Achsrichtung gegen die Kraft der Feder 4 in der
Zeichnung nach links geschoben. Läßt die Antriebskraft während des Ablaufens der
Nummernscheibe nach, so bewegt sich die Spindel während ihres Laufes nach rechts,
und die auf der Bremsspindel sitzende Scheibe 5 drückt oder schlägt die Kontaktfeder
6 gegen die Kontaktfeder 7, wodurch die beiden Kontakte 8 und 9 ip Berührung kommen
und der Sperrkontakt geschlossen ist. Sobald sich nämlich die Kontaktfeder 6 auf
die Kontaktfeder 7 zubewegt, fällt die Falle io ein, und der Pimpel i t hält die
Kontaktfeder 6 in Schließstellung. Dieser Zustand 'bleibt so lange bestehen, bis
durch Auflegen dez Fernhörers der Hebel 12 um die Achse 13 in der Richtung des Pfeiles
gedreht wird, wobei die Nase 14 die Falle i o wieder ausklinkt. Die beiden Vor-Sprünge
15 und 16 dienen als Anschlag zur Begrenzung des Weges der Falle i
o. Die Scheibe ist an ihrem ;Umfang ausgespart, so daß sich die Bremsspindel 3 im
Ruhezustand nach rechts verschieben kann, ohne den Kontakt 6, 7 zu betätigen. Die
beiden Kontaktfedern 6 und 7 sind in der Richtung nach rechts vorn bis zu ihrer
gemeinsamen isolierten Befestigung, wo auch die Stromzuführung stattfindet, verlängert
zu denken.i is the dial which actuates the impulse contact via the axis 2, as not shown further, and drives the brake spindle 3 on the worm S, which carries the speed controller G, by means of a gear. The brake spindle 3 is pushed by the driving force in its axial direction against the force of the spring 4 to the left in the drawing. If the driving force decreases while the dial is running, the spindle moves to the right while it is running, and the disc 5 sitting on the brake spindle presses or strikes the contact spring 6 against the contact spring 7, whereby the two contacts 8 and 9 ip come into contact and the blocking contact is closed. As soon as the contact spring 6 moves towards the contact spring 7, the trap drops io, and the pimple it holds the contact spring 6 in the closed position. This state 'remains until the lever 12 is rotated about the axis 13 in the direction of the arrow by placing the remote receiver, the nose 14 disengaging the trap again. The two pre-jumps 1 5 and 1 6 serve as a stop to limit the path of the trap i o. The disc is recessed on its circumference so that the brake spindle 3 can move to the right in the rest state without the contact 6, 7 to operate. The two contact springs 6 and 7 are to be thought of as being extended in the direction to the front right up to their common insulated attachment, where the power supply also takes place.
Im bisherigen ist die Sperreinrichtung beschrieben, die bei gehemmtem
Ablauf der Nummernscheibe in Tätigkeit tritt. Zur Verhinderung der Wahl verbotener
Ziffern dient die zweite Sperreinrichtung, bestehend aus der auf der Achse .2 festsitzenden
Scheibe 17, der Rastrolle. i 8 und der von ihr betätigten Scbaltklinke i g, die
sich um die Achse 20 dreht. Beim Aufzug der Nummernscheibe bis zur Einstellung einer
verbotenen Ziffer fällt die Rastrolle 18 in die Lücke 2 i der Srlyeibe
17
ein, und die Schaltklinke i g dreht sich in der Richtung des eingezeichneten
Pfeiles, wodurch sie dien Federkontakt 6 mit dem Federkontakt 7 bei 8 und .e in
Kontaktberührtuig bringt, worauf wieder die - Falle io einfällt und den Kontakt
geschlossen hält.So far, the locking device is described, which comes into action when the dial is blocked. To prevent the selection of forbidden digits, the second locking device, consisting of the disk 17, which is fixed on the axis .2, is the locking roller. i 8 and the Scbaltklinke ig actuated by it, which rotates around the axis 20. When the dial is lifted up to the setting of a forbidden digit, the locking roller 1 8 falls into the gap 2 i of the Srlyeibe 17 , and the pawl rotates in the direction of the arrow, whereby they serve the spring contact 6 with the spring contact 7 at 8 and .e brings in contact, whereupon the - trap occurs again and keeps the contact closed.