Zur Erzielung der Stützwirkung sind die Stützen an Klappdeckeln z. B. für Sprechmaschinengehäuse
mit einer Anschlagnase versehen, welche mit dem zugehörigen Stützteil
fest verbunden ist. Meistens sind Nase und Stützteil aus einem Stück angefertigt,
und zwar sind die Nasen in diesem Falle rechtwinklig umgebogen. Da nun bei den verschiedenen
Bauarten der Sprechmaschinengehäuse die Stütze einmal auf der linken und
einmal auf der rechten Seite angebracht ist, müssen also die Nasen entsprechend nach
links oder rechts umgebogen werden. Der Händler für diese Beschläge und auch der
Fabrikant ist also gezwungen, immer linke und rechte Stützen am Lager zu halten. Demgegenüber
stellt die Stütze gemäß der Erfindung eine Verbesserung dar, denn sie läßt sich sowohl als rechte als auch als linke verwenden,
und zwar dadurch, daß die Anschlagnase um i8o° verdrehbar an ihrem
Stützteil angelenkt ist.To achieve the supporting effect, the supports on hinged covers z. B. for speech machine housing
provided with a stop nose, which with the associated support part
is firmly connected. Most of the time, the nose and the support are made from one piece,
in this case the noses are bent at right angles. Since now with the different
Types of speaking machine housing the support once on the left and
once attached on the right side, so the noses must follow accordingly
be bent left or right. The dealer for these fittings and also the
The manufacturer is therefore forced to always keep left and right supports in stock. In contrast
the support according to the invention represents an improvement because it can be used both as a right and as a left,
in that the stop lug can be rotated through i8o ° on its
Support part is hinged.
Die Stütze besteht aus den beiden Stützteilen α und b, welche durch den Zapfen e gelenkig
miteinander verbunden sind. Zur Erzielung der Stützwirkung ist der obere Stützteil
α mit einer sich gegen den unteren Stützteil b legenden rechtwinklig abgebogenen Anschlagnase
c versehen, welche durch den Zapfen d drehbar mit ihrem Stützteil verbunden
ist, und zwar in der Weise, daß sich die Nase c in Pfeilrichtung um i8o° verdrehen
läßt (Fig. 1). Daraus ergibt sich, daß sich die Stütze gemäß Erfindung sowohl an Stelle
einer mit links umgebogener Nase als auch an Stelle einer mit rechts umgebogener Nase versehenen
Stütze verwenden läßt, indem man nämlich die Nase c je nach Bedarf nach links
oder rechts dreht. Dieser Vorgang wird an einer fertigen Stütze auf der Zeichnung durch
Fig. 2 und Fig. 3 veranschaulicht.The support consists of the two support parts α and b, which are articulated to one another by the pin e. To achieve the supporting effect, the upper support part α is provided with a stop lug c which is bent at right angles against the lower support part b and which is rotatably connected to its support part by the pin d in such a way that the nose c turns in the direction of the arrow Can be rotated i8o ° (Fig. 1). It follows that the support according to the invention can be used both in place of a nose bent to the left and in place of a nose bent to the right, namely by turning the nose c to the left or right as required. This process is illustrated on a finished support in the drawing by FIGS. 2 and 3.
Wir bezeichnen die Stütze in Fig. 2 als links. Will man nun die Stütze rechts verwenden,
so dreht man den Teil b, welcher ja drehbar mit dem Teil α verbunden ist, in
Pfeilrichtung einmal ganz herum. Während der Umdrehung stößt der Teil b gegen die
vorstehende Nase c und nimmt diese so weit mit, bis sie auf die entgegengesetzte Seite des
Teiles α zu sitzen kommt, sich also um i8o° gedreht hat. Die Stütze ist nun wieder in
Anschlagstellung, aber rechts, wie Fig. 3 zeigt.We refer to the support in Fig. 2 as the left. If you want to use the support on the right, you turn part b, which is rotatably connected to part α , all the way around in the direction of the arrow. During the revolution, part b hits the protruding nose c and takes it with it until it comes to sit on the opposite side of part α , i.e. has rotated by 180 °. The support is now in the stop position again, but on the right, as FIG. 3 shows.