Steckschlüssel. Gegenstand der Erfindung ist ein Steckschlüssel, bei
welchem das lästige Um- bzw. Einstecken des Dornes sowie das Verlieren desselben
wegfällt. Abb. t zeigt den Schlüssel in Gebrauchsstellung. Der Steckschlüsselkörper
a ist gegenübeir dem Sechskant zu einer Kugelschale ausgebildet, welche mit mehreren
Schlitzen. b bzw. Lappen: d versehen ist. In der Kugelschale ist eine Kugel c so
gelagert, daß die Lappen d die Kugel c so weit umfassen, daß die Kugel c sich in
der Schale nach allen Richtungen drehen, aber .nicht aus der Kugelschale herausgenommen
werden kann. Abb. 2 zeigt den Schlüssel in der Draufsicht.Socket wrench. The invention relates to a socket wrench
which the annoying repositioning or plugging in of the mandrel as well as losing it
ceases to exist. Fig. T shows the key in the position of use. The socket wrench body
a is formed opposite the hexagon to a spherical shell, which with several
Slitting. b or flap: d is provided. In the spherical shell there is a sphere c so
stored that the lobes d encompass the ball c so far that the ball c is in
Turn the shell in all directions, but do not remove it from the spherical shell
can be. Fig. 2 shows the key from above.
Die Kugel c (s, Abb. 3) hat eine Bohrung, in welcher der Drehstift
e verschiebbar gelagert ist. Die Bohrung in der Kugel c hat
eine
Nut f, in welcher sich. eine Ringfeder g befindet. Ferner hat der Drehstift e am
Ende k eine konische Eindehung !z, während am anderen Ende sich eine Verstärkung
i b efindet. Man kann nun den Drehstift e so weit aus der Kugel 'herausziehen, bis
das Ende k des Dornes e sich vollständig innerhalb der Kugel c befindet. In dieser
Stellung zieht sich nun der Federring g auf der konischen Eindrehung h des
Dornes e so weit zusammen, da.ß der Dorn, e in der Isugel c mittels des Federringes
g Widerstand findet, da der Federring g sich zur einen Hälfte auf dem Dorn e und
zur anderen Hälfte in der Nut f befindet. Der Dorn e kann also in der Kugel c verschoben,
aber nicht ganz herausgezogen werden.The ball c (s, Fig. 3) has a bore in which the pivot pin e is slidably mounted. The hole in the ball c has a groove f in which. a ring spring g is located. Furthermore, the pivot pin e has a conical expansion! Z at the end k, while a reinforcement ib e is found at the other end. You can now pull the pivot pin e out of the ball 'until the end k of the mandrel e is completely inside the ball c. In this position, the spring ring g contracts on the conical recess h of the mandrel e so far that the mandrel e finds resistance in the isugel c by means of the spring ring g, since one half of the spring ring g is on the mandrel e and the other half in the groove f. The mandrel e can thus be moved in the ball c, but not pulled out completely.
Die drei l-lauptteile, der Steckschlüsselkörper a, die Kugel c und
der Dom e, bilden also ein zusammenhängendes Ganzes,, bei welchem der Dorn e in
der Kugel c und die Kugel: c in dem Körper a beliebig bewegt, aber kein 'feil vom
andern getrennt werden kann. Durch diese Anordnung kann der Drehdorn e in die verschiedensten,
Stellungen; gebracht werden. Nach Abb. i kann man den Drehstift e ganz nach einer
Seite herausziehen und durch Einlegen von einer in die andere Nut b kleine Drehbewegungen
knarrenähnlich ausführen, wodurch ein schnelles, sicheres und bequemes Arbeiten
erreicht wird. Nach Abb. ¢ kann man den Dorne so verschieben, daß er zu beiden Seiten
des Schlüsselkopfes herausragt, so daß man mit beiden Händen drehen kann. Nach Abb.5
kann man durch einfaches Hochheben des Dornes e den Schlüsselkörper- a mit der Hand
drehen, was bekanntlich schneller geht, wenn sich die zu schraubende Mutter leicht
dreht. Nach Abb. 6 kann man den Drehdorn e bei Nichtgebrauch des Schlüssels in diesen
hineinschieben.The three main parts, the socket wrench body a, the ball c and
the dome e, thus form a coherent whole, in which the thorn e in
of the ball c and the ball: c moves arbitrarily in the body a, but no 'feil vom
can be separated from others. This arrangement allows the rotating mandrel to be inserted into a wide variety of
Positions; to be brought. According to Fig. I, the pivot pin e can be adjusted according to a
Pull out the side and make small turning movements by inserting one groove into the other b
Execute like a ratchet, which means that work is quick, safe and convenient
is achieved. According to Fig. ¢ you can move the mandrel so that it is on both sides
of the key head protrudes so that you can turn with both hands. According to Fig.5
you can simply lift the mandrel e to hold the key body a by hand
turn, which is known to be faster when the nut to be screwed easily
turns. According to Fig. 6, the rotating mandrel can be inserted into the key when the key is not in use
push in.