Impulsgenerator zur Speisung von Drahtzäunen mit hochgespannten Stromimpulsen. Um den Weidebetrieb rationeller zu ge stalten, ist man in der Landwirtschaft neuer dings dazu übergegangen, die kostspieligen, starren Weidezäune, die eine grosse Menge Material benötigen, zu ihrer Erstellung viel Zeit erfordern und die maschinelle Land bearbeitung behindern, durch den Elektro zaun zu ersetzen. Dieser besteht aus einem einfachen, an Holzpfählen in mässiger Höhe isoliert befestigten Draht, der durch einen Impulsgenerator in regelmässigen Zeitabstän den, von der Grössenordnung einer Sekunde, mit hochgespannten Stromimpulsen aufge laden wird. Das den Draht berührende Vieh wird elektrisiert und bleibt daher dem Draht zaun fern.
Die gleiche Einrichtung wird in der Forstwirtschaft für Wildgatter benutzt.
Bisher bestand die Einrichtung zur Spei sung des Drahtzaunes aus einem von Primär- oder Sekundärelementen gespeisten Funken induktor, einem primärseitigen Unterbrecher, der vom schwingenden oder rotierenden Ma gnetanker des mit entsprechendem Luftspalt versehenen Eisenkernes des Induktors be tätigt wurde. Infolge der Doppelwirkung sol cher Induktoren als Transformator und Un terbrecher benötigen sie verhältnismässig viel Wicklungsmetall und werden daher schwer und teuer.
Auch hat man bisher die Zahl der Unterbrechungen pro Zeiteinheit, also die minutliche Impulszahl, nicht regelbar ge macht. Schliesslich war, obwohl der ganze Apparat von einem Gehäuse umschlossen ist, die empfindliche Kontaktstelle des Unter brechers der Verstaubung ausgesetzt, so dass dadurch häufig Betriebsunterbrüche ver anlasst wurden.
Nach der Erfindung werden alle diese Nachteile beseitigt. Die Erfindung besteht darin, dass der zur Erzeugung der Hochspan nung dienende Transformator einen geschlos senen Eisenkreis besitzt und dass zur perio dischen Unterbrechung des ihm primär zu geführten Gleichstromes ein Unterbrecher relais vorhanden ist, das in ein besonderes, staubdichtes Gehäuse eingeschlossen ist, und dass Mittel zur Regelung der Impulszahl pro Zeiteinheit vorgesehen sind.
In der Zeichnung ist schematisch ein Aus führungsbeispiel des Erfindungsgegenstandes dargestellt, und zwar ein Impulsgenerator, der wahlweise mit Batterie oder von einem vorhandenen Niederspannungs-Wecliselstrom- netz aus betrieben werden kann. Der die Hochspannungsimpulse liefernde Transfor mator a besitzt einen geschlossenen Eisenkern und benötigt daher wenig Wicklungsmetall. Seine Oberspannungswicklung ist einerseits an den aufzuladenden Wendezaun b, ander seits an Erde e angeschlossen.
Seine Unter spannungswicklung wird über die Unterbre- cherkontakte c des Unterbrecherrelais d ge speist. Dieses besitzt einen polarisierten Eisenkern<I>NS</I> und einen von der Feder<I>f</I> an gezogenen, möglichst leichten, zweckmässig aus einem Blechstück hergestellten Schwenk anker g, der zwei Kontaktbrücken trägt und dessen Gelenk ausserhalb der Zeichnungsebene liegt.
Die eine Kontaktbrücke öffnet kurz zeitig den erwähnten Kontakt c im Strom kreis der Primärspule des Hochspa.nnungs- t:ransformators a. die andere öffnet gleich zeitig den Kontakt 1r, im Stromkreis der Spule des Relais d, entgegen der Wirkung der Fe der f. Parallel zur Relaisspule d liegt ein Kondensator k und ein regelbarer Wider stand i, mit welchem sich die minutliclie Im pulszahl einstellen lässt.
Als Stromquelle dient entweder die Batte rie ifa; in diesem Falle ist der Schalter o zu schliessen. Oder der Apparat wird bei -n an das Wechselstromnetz angeschlossen. Dann muss die Netzspannung im Transforma tor p herabgesetzt und im Glühkathoden gleichrichter q in Gleichstrom verwandelt werden. Zum Anschluss an verschiedene Netz spannungen ist der Umschalter r vorgesehen. Der Heizstrom für die Glühkathode des Gleichrichters q wird einer besonderen Heiz wicklung t des Transformators p entnommen, während die Röhrenanoden von seiner Sekun därwicklung s gespeist werden.
Mit der Röhre verbunden ist ein Wellenglätter v. Um die Vorrichtung a--k an das Netz anzuschliessen, wird bei offenem Schalter o der Umschalter u nach oben gelegt. Bei Bat- teriespeisung steht der Umschalter u in der Mitte. Um die Batterie m vom Netz 7a aus über den Gleichrichter q zu laden, legt man den Hebel des Umschalters u nach unten.
Zweckmässig wird nicht nur der ganze Impulsgenerator in ein -eiterfestes, mit einer Aufhä ngevorrichtunkn versehenes Gehäuse eingeschlossen, sondern das Unterbrecher relais d wird mit seinen Kontakten c und h in einem besonderen, staubdichten Gehäuse untergebracht, das innerhalb des ersteren Ge h Muses angeordnet ist und das zweckmässig, z. B. diircli Verstreichen der Fugen mit Kitt, hermetisch abgeschlossen ist.
Die oben be schriebenen Einzelteile des Impulsgenerators werden vorteilhaft auf einer gemeinsamen Grundplatte derart montiert, dass die Batterie m, als schwerster Teil sich in der Mitte der Grundplatte befindet. während auf beiden Seiten je einer der beiden Transformatoren a und p angeordnet ist. Die Bedienungsorgane der Schalter o und u, z. B. Druckknöpfe, wer den vorteilhaft auf der Unterseite der Grund platte angebracht.
Es ist. selbstverständlich auch möglich, den Impulsgenerator nur für Netzanschluss oder nur mit Akkumulatoren-, Nass- oder Trockenbatterien als Stromquelle zni bauen; er wird dann entsprechend kleiner, Ieicliter und billiger.
Pulse generator for feeding wire fences with high-voltage current pulses. In order to make grazing operations more efficient, agriculture has recently begun to replace the expensive, rigid pasture fences, which require a large amount of material, take a lot of time to build and hinder machine cultivation, with electric fences . This consists of a simple, insulated wire attached to wooden posts at a moderate height, which is charged by a pulse generator at regular intervals, of the order of a second, with high-tension current pulses. The cattle in contact with the wire are electrified and therefore stay away from the wire fence.
The same device is used in forestry for game gates.
So far, the device for Spei solution of the wire fence consisted of a spark inductor fed by primary or secondary elements, a primary-side breaker that was operated by the oscillating or rotating Ma gnetanker of the iron core of the inductor provided with a corresponding air gap. As a result of the double action of sol cher inductors as a transformer and breaker, they require a relatively large amount of winding metal and are therefore heavy and expensive.
So far, the number of interruptions per unit of time, i.e. the minute number of pulses, has not been made controllable. Ultimately, although the entire apparatus is enclosed in a housing, the sensitive contact point of the interrupter was exposed to dust, so that business interruptions were often caused.
According to the invention, all of these disadvantages are eliminated. The invention consists in the fact that the transformer used to generate the high voltage has a closed iron circuit and that there is an interrupter relay for periodic interruption of the direct current that is primarily supplied to it, which is enclosed in a special, dust-proof housing, and that means to regulate the number of pulses per unit of time.
In the drawing, an exemplary embodiment of the subject matter of the invention is shown schematically, namely a pulse generator that can be operated either with a battery or from an existing low-voltage alternating current network. The transformer a supplying the high-voltage pulses has a closed iron core and therefore requires little winding metal. Its high-voltage winding is connected on the one hand to the reversible fence to be charged b, on the other hand to earth e.
Its low voltage winding is fed via the breaker contacts c of the breaker relay d. This has a polarized iron core <I> NS </I> and a swivel anchor g that is pulled by the spring <I> f </I> and is as light as possible, suitably made from a piece of sheet metal and carries two contact bridges and its joint outside the Drawing plane lies.
One contact bridge briefly opens the mentioned contact c in the circuit of the primary coil of the high voltage transformer a. the other opens at the same time contact 1r, in the circuit of the coil of relay d, against the action of the Fe of f. Parallel to the relay coil d is a capacitor k and an adjustable resistor i, with which the minute number of pulses can be set.
Either the battery ifa serves as the power source; in this case switch o must be closed. Or the device is connected to the AC mains at -n. Then the mains voltage must be reduced in the transformer p and converted into direct current in the hot cathode rectifier q. The changeover switch r is provided for connection to various mains voltages. The heating current for the hot cathode of the rectifier q is taken from a special heating winding t of the transformer p, while the tube anodes are fed from its secondary winding s.
Connected to the tube is a wave straightener v. In order to connect the device a - k to the network, the switch u is moved upwards when the switch o is open. With battery supply the switch u is in the middle. To charge the battery m from the mains 7a via the rectifier q, the lever of the switch u is pushed down.
It is advisable not only to enclose the entire pulse generator in a permanent housing, provided with a hanging device, but also to place the interrupter relay d with its contacts c and h in a special, dust-proof housing that is arranged within the former housing and the appropriate, z. B. diircli smearing the joints with putty, hermetically sealed.
The individual parts of the pulse generator described above are advantageously mounted on a common base plate in such a way that the battery m, as the heaviest part, is located in the middle of the base plate. while one of the two transformers a and p is arranged on both sides. The controls of the switches o and u, z. B. Snap fasteners, who attached the advantageous plate on the underside of the base.
It is. of course also possible to build the pulse generator only for mains connection or only with accumulators, wet or dry batteries as a power source zni; it will then be correspondingly smaller, smaller, and cheaper.