Automat zur Ausgabe von Billets eines vorbestimmten Wertes. Gegenstand der Erfindung ist ein Auto mat zur Ausgabe von Billets eines vorbe stimmten, ein für allemal eingestellten Wer tes mit Mitteln zur Kontrollregistrierung. Der Automat nach der Erfindung eignet sich insbesondere zur Ausgabe von Eisenbahn fahrkarten für eine bestimmte Entfernung, kann aber infolge der grossen Sicherheit, die er sowohl für den Eigentümer als auch für den Fiskus bietet, zur Abgabe von Eintritts karten jeder Art und ähnlichen Wertschei nen stets gleichen eingestellten Wertes be nutzt werden.
Das kennzeichnende Merkmal des Auto maten gemäss der Erfindung besteht darin, dass zur Herbeiführung der Ausgabe mit einer Anzahl Münzen, die verschiedenen Wertes sein können, jede eingeführte und einkassierte Münze die Verstellung eines der betreffenden Münzart zugeordneten beweg lichen Gliedes um einen dem Münzwert ver hältnisgleichen Betrag herbeiführt, und dass die beweglichen Glieder erst bei Erreichung des vorbestimmten Bill:
etwertes, durch ein geführte und einkassierte Münzen in eine Stellung gelängen, in welcher sie den Strom für den Antriebsmotor des Automaten schlie ssen, welcher das Billet und den Kontroll- streifen bedruckt und das Addierwerk und einen Zähler weiterschaltet, welch letzterer die Anzahl der Arbeitsgänge des Automaten einschliesslich derjenigen zu Versuchs- und Kontrollzwecken zählt, welche letztere bei den durch einen zweiten Zähler noch ge sondert verzeichnet werden.
In den Zeichnungen ist als Ausführungs beispiel der Erfindung schematisch ein Auto mat zur Ausgabe von Eisenbahnfahrkarten dargestellt, welche zu einem bestimmten Wert, beispielsweise von 6 Franken, durch Einwurf von i@fünzen, z. B. zu einem Franken und zwei Franken, entnommen werden.
Die Fig. 1, 2 und 3 zeigen den Automaten von aussen, und zwar ist Fig. 1 eine Vorder ansicht des geschlossenen Automaten von der Benutzungsseite, Fig. 2 eine Seitenansicht mit entfernter Schautür, welche im allgemei nen verschlossen und durch einen Schlüssel gesperrt ist, wobei man die Zähler und den Sammenziehhe bel sieht; Fig. 3 ist ein Grund riss d:es geschlossenen Automaten; Fig. 4 ist in grösserem Massstab ein Aus schnitt aus der Fig. 2 ;
Fig. 5 zeigt in noch grösserem Masstabe die Vorrichtung zum Einstellen des auf die Fahrkarte und den Kontrollstreifen zu druckenden Datums, welche in Fig. 1 bei Entfernung der im allgemeinen -eschlossenen Schautür sichtbar werden würde; Fig. 6 ist eine Einzelheit des von den ein geworfenen und angenommenen Münzen ge steuerten Gerätes, welches beim Durchgang jeder 11lünze die in Fig_ 9 und 10 dargestellte <B>en</B> Vorrichtung in Betrieb setzt;
Fig. 7 zeigt den auch in Fig. 2 und 4 sichtbaren Knopf, der unter der Schautür liegt und mit welchem der Automat laufen gelassen werden kann, wenn der Summen- ziehhebel vorher nach rechts oder links um 90 in bezug auf die Stellung in Fig. ? und 4 gedreht worden ist; Fig. 8 ist eine Einzelheit der selbsttätigen Einrichtung zum Verschluss der Einwurf schlitze, wenn das Papier reisst oder sich dem Ende nähert, sowie renn der bestimmte Wert eingeworfen ist.
Die Einrichtung schliesst auch den Schlitz für die Münze höheren Wertes, wenn der Einwurf einer weiteren solchen Münze den bestimmten Be trag überschreiten würde. Es ist fernerhin die Vorrichtung gezeichnet, welche am Ende eines Arbeitsganges des Automaten die Schlitze selbsttätig wieder freilegt und die Einrichtung vollkommen in die Ausga,ngs- stellung gemäss Fig. 9 und I(1 zitriickfiilii@t; Die Fi;
g. 9 und 10 zeigen die beiden auf die gleiche Achse gesetzten Teile, welclic die Zentraleinrichtung bilden; dieselbe be wirkt die Leuchtanzeige der eingeführten Münzen, die Steuerung des Schlitzverschluss- gerätes und das Anlaufen des Automaten.
wenn dieser den bestimmten Gesamt-,vert an eingeworfenen Münzen einkassiert hat; Fig. 11 zeigt die Druckvorrichtung und
EMI0002.0043
den <SEP> Antrieb <SEP> der <SEP> beiden <SEP> Zähler, <SEP> von <SEP> denen <SEP> der
<tb> eine <SEP> alle <SEP> Arbeitsgänge <SEP> des <SEP> -7\-utomaten <SEP> Ver zeichnet, <SEP> während <SEP> der <SEP> andere <SEP> nur <SEP> die <SEP> Kon trollhänge <SEP> zählt, <SEP> bei <SEP> @t-elchen <SEP> wertlose <SEP> Fahr karten <SEP> mit <SEP> oder <SEP> ohne <SEP> Nullstellung <SEP> de:; <SEP> Zähl werkes <SEP> mit <SEP> dem <SEP> SiimmenaufdruelL <SEP> versehen
<tb> ausgegeben <SEP> werden:
<tb> Fig. <SEP> 12 <SEP> zeigt:
<SEP> den <SEP> wesentlichen <SEP> Teil <SEP> des
<tb> elektrischen <SEP> Schaltbildes <SEP> des <SEP> Automaten:
<tb> Fig. <SEP> 13. <SEP> 14 <SEP> und <SEP> 15 <SEP> zeigen <SEP> drei <SEP> Beispiele
<tb> ausgegehener <SEP> Fahrkarten, <SEP> und <SEP> zwar <SEP> zeigt
<tb> Fig. <SEP> 13 <SEP> ein <SEP> gültiges <SEP> Billet, <SEP> wie <SEP> es <SEP> beim <SEP> Ar beilen <SEP> des <SEP> Automaten <SEP> durch <SEP> Einführung, <SEP> von
<tb> Münzen <SEP> in <SEP> dein <SEP> fesi-gelegi:en <SEP> Gesamtwert <SEP> er halten <SEP> wird;
<SEP> Fig. <SEP> 1.:1 <SEP> und <SEP> 15 <SEP> zeigen <SEP> wertlose
<tb> Fahrkari:en, <SEP> wie <SEP> sie <SEP> hei <SEP> der <SEP> Kontrolle <SEP> des
<tb> Autoina.ten <SEP> durch <SEP> Niederdrücken <SEP> des <SEP> erwähn ten <SEP> Handknopfes <SEP> erhalten <SEP> werden, <SEP> wobei
<tb> Fig. <SEP> 14 <SEP> den <SEP> Silniinenanfdriiclz <SEP> im <SEP> Falle <SEP> einer
<tb> Nullstellung <SEP> <B>(NS).</B> <SEP> Fig. <SEP> 15 <SEP> im <SEP> Falle <SEP> ohne
<tb> Nullstellung <SEP> (0 <SEP> N) <SEP> zeigt.
<tb> Die <SEP> wesentlichen <SEP> Merkmale <SEP> des <SEP> darge stellten <SEP> Automaten <SEP> sind <SEP> die <SEP> folgenden:
<tb> 1. <SEP> ilIöglichkeit. <SEP> die <SEP> Ausgabe <SEP> der <SEP> Fahr karte <SEP> mit <SEP> einer <SEP> beliebi-en <SEP> Kombination <SEP> von
<tb> (für <SEP> den <SEP> Automaten) <SEP> -iiltigen <SEP> Münzen <SEP> zu <SEP> er zielen, <SEP> welche <SEP> zusammen <SEP> den <SEP> bestimmten <SEP> Be trag <SEP> bilden.
<tb> 2. <SEP> Leuelitkontrolle <SEP> der <SEP> aufeinanderfolgen den <SEP> @inka <SEP> ssiei:
un\ <SEP> en <SEP> der <SEP> eingeführten <SEP> Mün zen <SEP> durch <SEP> den <SEP> Automaten.
<tb> 3. <SEP> Selbsttätig=er <SEP> Verschluss <SEP> der <SEP> Einwerf schlitze <SEP> für <SEP> die <SEP> verschiedenen <SEP> münzen, <SEP> wenn
<tb> die <SEP> Einlui.ssierung <SEP> @veiterer <SEP> Münzen <SEP> den <SEP> be stimmten <SEP> Betrag <SEP> überschreiten <SEP> würde.
<tb> 4. <SEP> Sichtbarkeit <SEP> der <SEP> eingeworfenen <SEP> Mün zen.
<tb> 5. <SEP> Möglichkeit, <SEP> alle <SEP> einkassierten <SEP> Münzen
<tb> bis <SEP> zur <SEP> Erreichung <SEP> des <SEP> Gesamtbetrages <SEP> wie der <SEP> zurückzuziehen.
<tb> 6. <SEP> Nenn <SEP> der <SEP> bestimmte <SEP> Betrag <SEP> erreicht
<tb> ist, <SEP> läuft <SEP> der <SEP> Automat <SEP> selbsttätig <SEP> an.
<SEP> verstellt
<tb> das <SEP> Zählwerk, <SEP> die <SEP> Vorrichtungen <SEP> zur <SEP> auto xnatischen <SEP> Registrierung <SEP> usw., <SEP> druckt <SEP> die
<tb> Fahrkarte <SEP> und <SEP> den <SEP> Kontrollstreifen.
<tb> 7. <SEP> L:er <SEP> Automat- <SEP> lie@itzt <SEP> zwei <SEP> verschiedene
<tb> Arbeitsweisen. <SEP> Die <SEP> erste <SEP> Arbeitsweise <SEP> wird
<tb> durch <SEP> das <SEP> Publikum <SEP> herbeigeführt; <SEP> die zweite, zu Kontrollzwecken erfolgende Ar beitsweise kann nur durch das tberwa,chungs- personal herbeigeführt werden.
Die erste Ar beitsweise wird selbsttätig durch Einwurf und Einkassierung der Münzen herbeigeführt, wobei die Zahl der auf diese Weise ausge führten Arbeitsgänge des Automaten in einem Addierwerk addiert wird. Die zweite Arbeits weise geht nach der entsprechenden Einstel lung des Summenziehhebels durch Nieder drücken eines Knopfes von Hand vonstatten. Dieser Knopf ist nicht der Allgemeinheit, sondern nur dem Überwachungspersonal zu gänglich. Auch bei der Betätigung des Auto maten von Hand durch das Überwachungs personal wird der entsprechende Arbeitsgang im ersten Addierwerk zugezählt.
Gleichzeitig wird dieser Arbeitsgang ,aber auch in einem zweiten Addierwerk registriert. Der Unter schied der Zahlenangaben des ersten und des zweiten Addierwerkes stellt damit die Zahl der vom Automaten ausgegebenen gültigen Billets dar. Diese Anzahl, multipliziert mit dem Billetpreis, ergibt den vom Automaten eingenommenen Betrag und muss mit dem beim Summenziehen auf das ungültige Billet und auf den Kontrollstreifen aufgedruckten Betrag übereinstimmen.
Bei den Ablese- und Kontrollgängen, bei spielsweise zur Einstellung des Abschnitt- papieres werden die ausgegebenen Abschnitte selbsttätig durch leicht wahrnehmbare Zei chen oder Beschriftungen entwertet. Es kommt beispielsweise ein roter Streifen oder d-ie rote Aufschrift. "ungültig" oder eine Ver einigung beider oder andere in rot gedruckte Zeichen in Frage.
B. Der Automat ist mit zwei Zählwerken versehen, von denen der eine die Arbeits gänge des Automaten auch beim Probelauf zur Einstellung des; Abschnittpapieres, sowie bei der Kontrolle und beim Summenziehen anzeigt, während der andere nur die zu Probezwecken und zur Ablesung ausgegebe nen Abschnitte oder Billets verzeichnet.
9. Wenn der Automat inRuhe und Arbeits bereitschaft ist, ist eine weisse Lampe er leuchtet, welche nicht nur den Betriebszu- stand des Automaten anzeigt, sondern auch die Gebrauchsanweisung für das Publikum beleuchtet. Sobald der Automat anläuft, er löscht das weisse Licht, und es leuchtet eine rote Lampe auf, welche so lange hell bleibt, wie der Automat läuft, d. h. bis zum Ende des Arbeitsganges, und sein ordnungsgemässes Arbeiten anzeigt. Am Ende des Arbeits ganges leuchtet erneut die weisse Lampe auf. Wenn das rote Licht nicht erlischt, so be deutet dies, dass der Automat schadhaft ist. In diesem Falle tritt der selbsttätige Ver schluss der Münzschlitze in Wirkung.
Es ist noch eine grüne Lampe vorhanden, welche aufleuchtet, wenn der Streifen zur Bildung der Abschnitte oder der Kontroll streifen reisst oder sich dem Ende nähert; hierbei erlischt die weisse Lampe und es schliessen sieh die Einwurfschlitze. Die Vor richtung, welche die grüne Lampe zum. Auf leuchten bringt, ist derart angeordnet, dass sie unter allen Umständen noch die Ausgabe des in der Vorbereitung befindlichen Ab- schnittes gewährleistet. Zu diesem Zweck ist der Fühler der Vorrichtung in einem Ab stande von der Schnittstelle angeordnet, wel cher grösser ist als die Biilletlänge.
10. Eine besondere Vorrichtung gestattet die Wiederentnahme der Münzen durch das Publikum, wenn der Automat noch nicht an gelaufen ist.
Wie aus Fig. 1 bis 3 ersichtlich, besteht der Automat aus einem Sockel mit einer durch ein Schlüsselschloss verschlossenen Tür S', durch. welche man zu dem Münzensammel- sack gelangen kann, und aus einem Aufsatz, an welchem die Einwurfscblitze F und F', zwei Gläser H und H' zum Verfolgen der eingeworfenen Münzen bis zur Bildung des bestimmten Betrages, Glühlampen G, die bei den Münzeneinführungen aufleuchten, und ein Schild Q mit der Gebrauchsanweisung vorgesehen sind.
Wenn der Automat in Ruhe und betriebsbereit ist, so ist die Tafel Q weiss erleuchtet. Sie wird durch die Lampe R rot beleuchtet, wenn der Automat arbeitet oder nicht wirkungsbereit ist. Die Beleuchtung erfolgt durch die grüne Lampe V, wenn das Papier für die Fahrkarten oder des Kontroll- streifens reisst oder zu Ende geht. Pott, wo der Sockel und der Aufsatz zusammenstossen, ist eine Offnung B, aus welcher man die ein geworfenen Münzen durch Niederdrücken des Knopfes 122 entnehmen kann, solange der Automat noch nicht angelaufen ist.
Der Auf satz, welcher die verschiedenen Getriebe und die Druck- und Registriereinrichtung ent hält, ist mit einer Tür S versehen. die eben falls -unter Schlüsselverschluss steht und nach deren Öffnung man den Summenziehhebel verstellen und anschliessend den Handknopf 7' niederdrücken und auch den Knopf Z (Fig. 5) zur Einstellung des a.ufziidrucli:
en- den Datums verstellen kann. D1an kann auch den Knopf 25 (Fig. 8) niederdrücken, wel cher nach einer etwaigen Wiederherstellung oder nach dem Einsatz des Papiers die Schlitze F und F' von den Schliessarmen 15 und 17 befreit, welche diese beim Riss oder Beenden des Papiers selbsttätig verschlossen hatten.
Die Wirkungsweise dieser Einrich tung ist die folgende: Wenn das Papier reisst oder sich dem Ende nähert, aber noch lang genug ist.. um das in der Vorbereitung befindliche Billet zu bilden, bewirkt ein Fühler auf dem Ab schnitt- und Kontrollstreifen die Schliessung des Erregerstromkreises des Elektromagneten 1 (Fig. 8). Dieser zieht den Anker 2 an, wel cher hebelartig um den Zapfen 3 schwenkbar ist und mit einem zweiten Arm mittels des Zapfens 5 in den Schlitz 6 der Lasche 7 ein greift. Diese Lasche ist bei 8 an einen Vier armhebel aasgelenkt, der um den Zapfen 10 drehbar ist.
An seinem Arm 11 ist der Len ker 12 aasgelenkt, dessen Schlitz 13 den Stift 14 am Arm 15 umschliesst, welcher den Schlitz F zum Einwurf der 2-Frankenmünze sperren kann und um den Zapfen 16 drehbar ist. Der Arm 17 des erwähnten Vierarm- hebels kann den Schlitz F' zum Einwurf der 1-Frankenmünze sperren. Wie ohne weiteres ersichtlich ist, gelangen beim Anziehen des Ankers 2 die beiden Arme 17 und 15 in die Stellung, in der sie die ihnen zugeordneten Einwurfschlitze verschliessen.
Gegen den vierten Arm 18 des Vierarm hebels wird von der Feder 19 der um den Zapfen 21 drehbare Hebel 20 angedrückt. An ihm greift der Lenker 22 an, der zu dem um den Zapfen 21 drehbaren Winkelhebel 23 führt. :In dein zweiten Arm dieses Winkel hebels 23 kann man den Druckknopf 25 an greifen lassen, welcher nicht allgemein zu gänglich ist. Beim Anzieh##n des Ankers 2 durch den Elektromagneten 1 schnappt der Hebel 20 klinkenartig hinter den Arm 18 des Vierarmhebels ein, sperrt diesen also in der Stellung, in welcher er mit dem Arm 17 den Schlitz F' schliesst.
In ähnlicher Weise wirkt auf den Arm 26 des Hebels mit dem Schliessarm 15 für den Schlitz F der Hebel 27, welcher um den Zapfen 28 drehbar ist und an dem die Feder 29 angreift. Wenn beim Anziehen des An kers 2 durch den Elektromagneten 1 der Len ker 12 den Arm 1 5 über den Schlitz F bringt, schnappt die Klinke 27 hinter dem Arm 26 ein. und die Feder 29 hält daher den Arm 15 in Schliessslelliuig.wie die Feder 19 den Arm 17 über dem Schlitz F' sichert, und dies auch dann, wenn die Erregung des Elektromagne- 1en I aufhört.
Die Aufsichtsperson wird durch das Auf leuchten der grünen Lampe dann aufmerk sam gemacht und kann mit dem Schlüssel die Tür S" des Automaten öffnen, um in dessen Innern das ausgegangene Papier zu ersetzen oder den zerrissenen Streifen in Ordnung zu bringen. Sie drückt hiernach, aber vor Schlie ssen des Automaten den Knopf 25 nieder, wo durch die Klinke 20 nach unten bewegt wird und den Arm 18 des Vierarmhebels freigibt, so dass dieser durch die Feder 30 wieder in die Stellung gedreht wird, in welcher sein Arm 17 den Schlitz F' freilegt.
Vor dem Schliessen des Automaten und nach dem Niederdrücken des Knopfes 25 soll die Bedienungsperson den Summenziehhebel 1, aus der in Fig. 2 und 4 gezeichneten Stel lung um<B>90'</B> nach rechts oder links auf das grüne Zeichen<I>v</I> oder das rote Zeichen<I>r</I> drehen, je nachdem ob sie einen langen Schlüssel oder einen kurzen Schlüssel besitzt, von denen der letztere die Einstellung des Hebels nur auf Summenzug ohne Nullstel lung, der erstere hingegen den Summenzug auch mit Nullstellung gestattet. In dieser Stellung des Summenzughebels L kann die Bedienungsperson die Maschine in Lauf setzen, falls sie vorher die Taste T (Fig. 4 und 11) niedergedrückt hat.
Dieses Nieder drücken kann selbstverständlich nicht vorge nommen werden, wenn der Hehel L nicht vor her verstellt worden ist. Denn unter der Taste befindet sich ein mit dem Hebel L ge huppeltes Rad, das zwei Einschnitte 31, 32 (Fig. 11) aufweist. Die Taste T kann nur niedergedrückt werden, wenn einer der bei den Einschnitte unter ihr liegt, und dies ist nur der Fall, wenn der Hebel L in Summen ziehstellung ist. Andernfalls würde die Taste T gegen den vollen Teil des Rades stossen.
Wenn die Taste T niedergedrückt wird, so wird der Automat elektrisch in Lauf ge setzt. Zu diesem Zweck ist die Taste T gemäss Fig. 7 mit einem seitlichen Stift 32' ver sehen, der in die Gabel 33 eines um den i Zapfen 35 drehbaren Hebels 34, 36 eingreift.
Am Arm 36 dieses Hebels ist ein kleiner Stössel 3 7 angelenkt, der mit seinem freien Ende auf den bei 39 gelagerten Hebel 38 drückt, welcher mit dem beweglichen Kon takt 43 versehen ist. Dieser wird mit dem festen Kontakt 44 in Berührung gebracht und dadurch erfolgt die Schliessung des Er regerstromes für den Antriebsmotor des Au tomaien infolge Niederdrückens der Taste T.
Beim Laufen des Automaten schwingt der in Fig. 8 ersichtliche, um den Zapfen 46 drehbare sektorförmige Nocken 45 aus der gezeichneten Stellung nach links aus, wo durch die Rolle 47 aus der punktierten Stel- 9 lung, in die sie durch die Einkassierung der letzten Münze der vorangegangenen Wert bildung gebracht worden war, in die voll ge zeichnete Stellung angehoben wird. Die Rolle sitzt an einer Lasche 48, die geführt und am Arm 49 des erwähnten, klinkenartig wirken den Hebels 27 angelenkt ist.
Es wird daher dieser Hebel gesenkt, und er gibt den Arm 26 frei, wodurch der Schliessarm 15 durch die Feder 50 aus der Stellung, in der er den Schlitz F sperrt, in die Freigabestellung zu rückgeführt wird.
Da, wie noch gezeigt werden wird, das automatische Anlaufen des Automaten die beiden Schlitze F und F' mittels der Arme 15 und 102 schliesst, bewirkt auch der Nok- ken 45 die Freigabe dieser beiden Schlitze beim Ende eines Arbeitsganges des Auto maten.
Die Münzen Ho werden nach ihrem Ein wurf in dem Schacht 53 (Fig. 6) geführt, und gelangen nach Durchlaufen einer üb lichen Prüfvorrichtung, welche ungültige Münzen ausscheidet, an eine Stelle, welche durch das Schauglas<I>H</I> bezw. <I>11'</I> (Fig. 1) sichtbar ist.
Es sind Mittel zur Lichtkontrolle der in den Automaten eingeführten und von ihm abgenommenen Münzen vorgesehen. Da in dem dargestellten Ausführungsbeispiel ein Wert von sechs Franken angenommen ist, der mit Münzen zu einem und zwei Franken er reicht werden kann, ist eine Reihe von sechs Glühlampen G vorgesehen. Für jede 2-Frankenmünze, die eingeworfen wird, leuch ten von oben nach unten zwei Lampen auf, während für jede eingeworfene 1-Franken- münze von unten nach oben jeweils eine Lampe aufleuchtet. Auf diese Weise ist es möglich, mit den dreizehn denkbaren Kombi nationen aus Münzen ein oder zwei oder ein und zwei Franken die für die Ausgabe der Fahrkarte vorgesehene Summe von sechs Franken zu bilden.
Die Vorrichtung, welche das Aufleuch ten der Glühlampen bewirkt und die Schlitze F und F' derart steuert, dass derjenige für die 2-Frankenmünze sieh schliesst, sobald Münzen im Gesamtwert von fünf Franken eingeworfen sind, während der andere eben falls geschlossen wird, wenn die Gesamt summe von sechs Franken erreicht ist, und welche nach beendetem Arbeitsgang die Sehlitze selbsttätig wieder öffnet, ist die folgende Durch den Durchgang der Münzen zu einer und zu zwei Franken werden mittels der Einrichtung gemäss Fig. 6 zwei Elektro magnete 51 bezw. 52 (Fig. 9) erregt,
wäh rend die Münzen durch den ihnen zugeordne ten Schacht 53 hinter die Fenster<I>H. H'</I> laufen. Denn in die Schächte ragt ein Arm 54 eines bei 55 drehbar gelagerten Hebel: hinein, dessen rückseitiger Arm den beweg lichen Kontakt 56 an den festen Kontakt. 5 7 bringt. Auf diese Weise wird der Elektro magnet 51 bezw. 52 bei jedem Durchgang einer Münze zu einer bezw. zwei Franken unter Strom gesetzt, weil die Münzen selbst die Schwenkung des Hebels 54 bewirken.
Wie aus Fig. 9 ersichtlich ist, bewirken die Anker 58, 59 dieser Elektromagneten bei deren Erregung über die Laschen 60 bezw. 61 und über die um den Zapfen 64 drehbar gelagerten Winkelhebel 6? bezw. 63 mit den zweiten Armen 65 bezw. 66 derselben ein Schwenken der Schaltklinken 67, welche die Sektoren 69 bezw. 70 in Drehung versetzen.
Zu diesem Zweek sind die Sektoren mit Schaltzähnen 71 bezw. 72 versehen. Die Hebelabmessungen sind derart gewählt, dass der Hub der Klinke 68 doppelt so gross wird wie derjenige der Klinke 67. Daher erfährt bei jedem Impuls der Sektor 70 eine doppelt so grosse Verstellung @vie der Sektor 69. 83 und 84 sind die Sperrklinken, welche die Sektoren in den jeweils erreichten Stellun gen sichern, wenn die Winkelhebel 62, 65 und 63, 66 in die Ausgangsstellung zurück gehen.
Fest mit den Sektoren 69 und 70 sind die in Fig. 10 gezeiehneten Sektoren i3' und 74 aus isolierendem Werkstoff verbunden. Die beiden Sektoren 73 und 74 tragen jeweils ein Stromführungsblech 75, 75', das sich auf ihren ganzen Umfang erstreckt. Der Sektor 73 trägt fernerhin an der Vorderseite zwei gebogene Stromschienen 76 und 77, die nach vorn in Richtung auf dem Sektor 74 zu herausragen. Dieser ist nach dem Dreh punkt zu mit einer Schiene 78 versehen, wel che einen Vorsprung 79 aufweist.
Auf den Blechen 75 und 75' streichen die Gleitkon- takte 80 bezw. 81, welche in den Erreger- kreis für den Antriebsmotor M' des Automa- tcn eingesehaltet sind.
Die Schiene 7 7 ist elektrisch mit dem 31otorlueis verbunden, wie die Schiene 78 stäudi6, an das Blech 75' angeschlossen ist. Die Sektoren 73 und 74 werden derart ver stellt, dass bei Erreichung des fünften ein- geworfenen Frankens die Schiene 76 mit dem Vorsprung 7 9 der Schiene 7 8 in Berührung gelangt, wodurch der Elektromagnet 82 er regt und in noch zu beschreibender Weise der Hebel verstellt wird, welcher den Arm 15 zum Verschluss des Ein wurfschlitzes F der ?-Frankenmünzen trägt.
Eine weitere Ver stellung des Sektors 73 bringt auch die Schiene 7 7 in Berührung mit der Schiene 78, wodurch der Erregerstrom für den Motor ge schlossen und der Automat zur tlusgabe einer Fahrkarte in einer ebenfalls noch zu beschrei benden Weise in Betrieb gesetzt wird.
Bei den aufeinanderfolgenden Verstellun gen der Sektoren 73 und 74 kommen deren Bleche 7 5 und<B>75'</B> an die oben liegenden Kontakte L1, L._, L3 .<I>. . . . L"</I> zum Anliegen, wodurch jeweils die oben erwähnten Kon trollampen G eingeschaltet werden.
Da der Sektor 74 sich jeweils doppelt so weit ver stellt wie der Sektor 73, so bewirkt er bei jeder Verstellung das Einschalten von zwei Lampen, während der andere Sektor jeweils nur eine Lampe einschaltet und dies in ent gegengesetzter Richtung, so dass sich die oben beschriebene Art des Aufleuchtens einstellt.
Wenn der Arbeitsgang ausgeführt, d. h. der Druck, die Ausgabe der Fahrkarte und die Einkassierung des Betrages in noch zu be- sebreibender Weise erfolgt sind, muss die Maschine mit dem ganzen Getriebe in die oben dargestellte Ausgangsstellung zurück kehren.
Die Sperrklinken 83 und 84 (Fig. 9), welche die Sektoren 69 wid 70 in. den Stel lungen festhalten, in die sie bei jedem Im puls durch eine eingeworfene Münze von den Klinken 6 7 und 68 gebracht werden, wenn diese von den Hebeln 65 und 66 beim Auf- hGren der erwähnten Impulse ausgerückt und in die Ausgangsstellung gebracht werden, liegen mit Ansätzen an Ansätzen der Klin- ken 67 und 68 an.
Um die Münzkombination innerhalb der durch dieSektorenend@stellungen(Ausgabestel- lung) gegebenen Höchstgrenze beliebig ändern zu können, steht der Sektor (73, 74) unter der Einwirkung eines Stufennockens (190, 191). Die Verstellung eines Stufennockens auf eine höhere Stufe, z. B. auf die nächst höhere Stufe, bewirkt die Verstellung des zu gehörigen Sektors um einen Schritt in Rieh tung auf die Endstellung zu.
Der Sektor legt also bis zur Erreichung der Endstellung, in welcher seine Stromschiene mit der Strom- sehiene des andern Sektors in Berührung kommt, einen Schritt weniger zurück und kehrt in seine Ausgangsstellung (Nullstel lung) zurück, welche dieser Endstellung um einen Schritt näher liegt. Es braucht somit eine entsprechende Münze weniger eingewor fen zu werden, um den Ausgabestromkreis zu schliessen, falls der andere Sektor nicht eben falls durch seinen Nocken verstellt wurde.
Durch entsprechende Annäherung des einen oder des andern Sektors oder beider Sektoren bezw. durch ihre entsprechende Entfernung von dieser Stellung kann also jede beliebige Münzkombination erzielt werden, wodurch der Automat in einfacher Weise schnell auf einen beliebigen andern Ausgabebetrag um gestellt werden kann. Die Höhe der Nocken stufen ist dabei der durch einen Schaltzahn bewirkten Verstellung des zugehörigen Sek tors verhältnisgleich; die Stufendes Nockens 191 haben also die doppelte Höhe der ent sprechenden Stufen des Nockens 190, so dass die Verstellung des Nockens 191 um eine Stufe den dazugehörigen Sektor um den dop pelten Betrag verstellt als dies durch die Verstellung des Nockens 190 um eine Stufe beim Sektor 73 der Fall ist.
Der Kopf des Stiftes 85 (Fig. 8), welcher von dem um den Zapfen 87 drehbaren und unter den Ansätzen der Klinken 67 und 68 liegenden Hebel 86 gesteuert wird, dient dazu, die ganze Einrichtung nach Fig. 9 und 10 am Ende eines Arbeitsganges des Auto maten in die Ausgangsstellung zurückzu- bringen. Der Hebel 86 ist mit einem Arm 88 versehen, an welchem der Arm 89 eines Drei armhebels anliegt, der um den Zapfen 90 drehbar ist. An dem Arm 91 desselben greift der Nocken 92 auf der Welle 93 an, uJelche bei jedem Arbeitsgang des Automaten eine Drehung um 360<B>'</B>ausführt.
Auf diese Weise bewirkt am Ende des Arbeitsganges der Nocken 92 ein Anheben des Stiftes 85, wel cher die Ansätze der Klinken 67 und 68 an hebt, sie aus den Verzahnungen 71, 72 der Sektoren ausrückt, und gleichzeitig auf die Ansätze der Klinken 83 und 84 einwirkt, um auch sie aus diesen Verzahnungen auszu rücken. Die an allen Hebeln usw. angreifen den Federn bringen die Einrichtung am Ende des Arbeitsganges vollkommen in Null stellung zurück.
Wie beim Einkassieren der fünften Münze sich der Erregerstrom für den Elektromagne ten 82 über das Blech 76 und den Vorsprung 79 schliesst und über den Arm 15 den Schlitz F sperrt, so bewirkt die Einkassierung des sechsten Frankens durch Schliessung des Mo torstromkreises über die Schiene 77 und die Schiene 78 (Fig. 1.0) auch die Stromzufüh rung zu einem Elektromagneten 94 (Fig. 8), dessen um den Zapfen 96 schwingender An ker 95 mit seinem Arm 97 bezw. dessen Stift 98 den Lenker 99 hochzieht, dessen unteres Ende an dem Arm 100 eines um den Zapfen 101 drehbaren Dreiarmhebels angelenkt ist.
Der Arm 102 desselben geht dann in die Stellung, in welcher er den Schlitz F' für die 1-Frankenmünzen schliesst. An den kurzen Arm 103 dieses Hebels greift die bei 105 ge lagerte Klinke 104 an, deren Arm 106 mit tels der Lasche 108 mit Schlitz 109 mit dem Arm 111 mit Stift 110 verbunden ist, wel cher einen Teil der oben erwähnten Sperr klinke 27 bildet, welche an dem Teil 26 des Schliessarmes 15 für den 2-Frankenschlitz F angreift.
Auf diese Weise kann zusammen mit dem Anlaufen des Automaten der 1-Franken- schlitz F' geschlossen werden, nachdem der 2-Frankenschlitz bereits nach Einführung von fünf Franken geschlossen worden ist. Das durch die Drehung des Nockens 92 am Ende des Arbeitsganges erfolgte Frei geben des Schliessarmes 15, 26 für den Schlitz F von der Klinke 27 bewirkt in Anbetracht der Verbindung letzterer mit der Klinke 104 über den Lenker 108 auch das Ausrücken derselben aus der Stellung, in welcher sie den Schliessarm 102, 103 für den Schlitz F' in der Schliessstellung sichert.
Nach erfolgtem Ausrücken bewirken die Federn 50 und 50' das Zurückschwingen der Arme 15 bezw. 102 in die Freigabestellung.
Die Reihe der Münzen sowohl zu einem Franken als auch zu zwei Franken, welche sich hinter den Fenstern<I>H</I> und Il' bildet, wird durch die Stütze 112 -ehalten, die um den Zapfen 46 drehbar und mit dem sektor- förmigen Nocken 45 fest verbunden ist. Die Stütze 112 hat einen Ansatz 113, an welchem eine verhältnismässig schwache Feder 114 angreift. Auf dem gleichen Zapfen 46 sitzt lose ein Dreiarmhebel, dessen Arm 115 gegen einen festen Anschlag 116 von einer kräfti gen Feder 117 gedrückt wird, welche am Arm 118 angreift, während der dritte Arm 119 mit einem einstellbaren Anschlag, 120 gegen die Stütze 112 versehen ist.
Der um den Zapfen 90 drehbare und von dem Nocken 92 gesteuerte, bereits erwähnte Hebel 89, 91 ist mit einem weiteren Arm 121 versehen, welcher beim Auflaufen des Nok- kens eine Schwingung der Stütze 11\Z in Richtung des Pfeils d bewirkt, indem er deren Ansatz 113 anhebt. Durch diese Schwenkung der Stütze gleiten die seitlich in den Führungen gehaltenen Münzen am Rande der Stütze 112 ab und gelangen durch einen nicht dargestellten Kanal in den Sammelsack.
Der Automat ist mit Mitteln versehen, mit welchen das Publikum die Münzen vor dem Abrollen in den Sammelsack wieder ent nehmen kann. Hierzu dient der aus dein Automatengehäuse herausragende Druck- knopf 122 (Fug. 1 und 8), der mit einem seit lichen Stift 123 und am Ende mit einem Schlitz versehen ist, in welchen der Zapfen
EMI0008.0019
124 <SEP> auf <SEP> dein <SEP> bereits <SEP> erwähnten <SEP> Hebel <SEP> 86 <SEP> ein greift.
<tb> Ein <SEP> Niederdrücken <SEP> des <SEP> Knopfes <SEP> 122 <SEP> be wirkt <SEP> zunächst:
<SEP> durch <SEP> die <SEP> Verschiebung <SEP> des
<tb> Stiftes <SEP> 124 <SEP> eine <SEP> Sehv,enlxung <SEP> des <SEP> Hebels <SEP> 86
<tb> und <SEP> damit <SEP> ein <SEP> Anheben <SEP> des <SEP> Stiftes <SEP> 85. <SEP> wel eher <SEP> die <SEP> EinriclitZmg <SEP> zur <SEP> Leuchtanzeige <SEP> der
<tb> eingeführten <SEP> Münzen <SEP> und <SEP> zum <SEP> Anlassen <SEP> des
<tb> Automaten <SEP> bei <SEP> voller <SEP> Einführung <SEP> des <SEP> be stimmten <SEP> Wertes <SEP> in <SEP> Nullstellung <SEP> zurück führt.
<SEP> Alsdann <SEP> bewirkt <SEP> der <SEP> seitliche <SEP> Zapfen
<tb> 123 <SEP> eine <SEP> Drehun"- <SEP> des <SEP> Dreiarmhebels <SEP> 115,
<tb> 118, <SEP> 119, <SEP> so <SEP> dass <SEP> die <SEP> Spannung <SEP> der <SEP> starken
<tb> Feder <SEP> <B>117</B> <SEP> überwunden <SEP> wird <SEP> und <SEP> die <SEP> auf <SEP> den
<tb> Arm <SEP> 113 <SEP> wirkende <SEP> selswaclxe <SEP> Feder <SEP> 114 <SEP> die
<tb> Stütze <SEP> 11.2 <SEP> in <SEP> zum <SEP> Pfeil <SEP> d <SEP> fntgeg-engesetzter
<tb> Richtung <SEP> dreht,
<SEP> wodurch <SEP> die <SEP> über <SEP> der <SEP> Stütze
<tb> 1l\3 <SEP> liegenden <SEP> Münzen <SEP> vor <SEP> dieser <SEP> abrollen
<tb> und <SEP> zu <SEP> einer <SEP> entsprechenden <SEP> Ausgabeöffnung
<tb> 13 <SEP> gelangen.
<tb> Wenn <SEP> man <SEP> die <SEP> unter <SEP> Sehlüsselversehluss
<tb> stehende <SEP> Tür <SEP> 8 <SEP> des <SEP> Automaten <SEP> öffnet, <SEP> so <SEP> ge langt <SEP> nian <SEP> an <SEP> den <SEP> drehbaren <SEP> Knopf
<tb> 1 <SEP> 1@'_ <SEP> i@. <SEP> a <SEP> ), <SEP> der <SEP> um <SEP> ;eine <SEP> Aeliscdrelxbar <SEP> und <SEP> m:
t
<tb> einer <SEP> Seheibe <SEP> fest <SEP> verbunden <SEP> ist, <SEP> welche <SEP> die
<tb> Ziffern <SEP> 1 <SEP> bis <SEP> 31 <SEP> entsprechend <SEP> den <SEP> Monats tagen <SEP> aufweist. <SEP> Eine <SEP> geeignete <SEP> Zahnradüber setzung <SEP> bringt <SEP> auch <SEP> eine <SEP> zweite, <SEP> gleichachsig
<tb> zur <SEP> ersten <SEP> liebende <SEP> Scheibe <SEP> in <SEP> Drehung, <SEP> auf
<tb> welcher <SEP> die <SEP> Honatsnaxnen <SEP> geschrieben <SEP> sind,
<tb> so <SEP> dass <SEP> naeli <SEP> Durchlaufen <SEP> der <SEP> 31 <SEP> Ziffern <SEP> die
<tb> Beschriftung <SEP> des <SEP> niielisten <SEP> Monats <SEP> vorgeseho 'oen <SEP> wird.
<tb> Am <SEP> Morgen <SEP> ,
jedes <SEP> Tages <SEP> kann <SEP> die <SEP> Bedie nungsperson <SEP> durch <SEP> das <SEP> Beobachtungsfenster
<tb> mit <SEP> dem <SEP> Knopf <SEP> X <SEP> den <SEP> jeweiligen <SEP> Tag <SEP> und
<tb> Monat <SEP> einstellen. <SEP> Von <SEP> den <SEP> beiden <SEP> Scheiben
<tb> werden <SEP> Typenräder <SEP> gesteuert, <SEP> welche <SEP> lose <SEP> auf
<tb> einer <SEP> gemeinsamen <SEP> Aelise <SEP> 125 <SEP> sitzen. <SEP> welche
<tb> gemäss <SEP> Fig. <SEP> 1.1 <SEP> ein <SEP> weiteres <SEP> Typenrad <SEP> mit
<tb> Nocken <SEP> <B>127</B> <SEP> trägt. <SEP> An <SEP> dem <SEP> Rad <SEP> 126 <SEP> sind <SEP> drei
<tb> Typenvorsprünge <SEP> 128 <SEP> vorgesehen.
<SEP> Die <SEP> Be schriftung <SEP> des <SEP> ersten <SEP> lautet <SEP> <B>"ON"</B> <SEP> = <SEP> ohne
<tb> Nullstelluiib, <SEP> die <SEP> zweite <SEP> Beschriftung <SEP> lautet
<tb> "N" <SEP> = <SEP> Nummer <SEP> und <SEP> dient <SEP> zur <SEP> Unterschei dung <SEP> des <SEP> Automaten <SEP> von <SEP> andern. <SEP> Die <SEP> dritte
<tb> 13eselii-:ftun,#; <SEP> Iautei <SEP> <B>"NS"</B> <SEP> = <SEP> Nullstellung.
<tb> Diese <SEP> Zeichen <SEP> werden <SEP> sowohl <SEP> auf <SEP> die <SEP> Fahr- karte als auch auf den Kontrollstreifen ge druckt, wie noch beschrieben werden wird.
Die Aufbringung des Druckes erfolgt durch die Andrückrolle 129, welche von dem bei 180 gelagerten Hebel 180' gehalten wird. Dieser Hebel ist mittels des Lenkers 131 an den um den Zapfen 188 drehbaren Winkel hebel 1'32 angeschlossen, welcher von dem Nocken 134 gesteuert wird, der bei jedem Ar beitsgang des Automaten eine vollkommene Drehung ausführt.
Der Nocken 127 am Typenrad 126 steuert den um den Zapfen 136 drehbaren Hebel<B>135,</B> an welchem die Feder 187 angreift. Der Hebel. 135 trägt eine Druckrolle 138 und für diese eine Färberolle 139, um bei Ver suchslauf oder bei Summenablesungen des Automaten auf die anfallenden Fahrkarten auffallend gefärbte Ungültigkeitszeichen zu drucken. Der Papierstreifen C, von welchem die Fahrkarten abgeschnitten werden, läuft von der Rolle 140 ab und gelangt nach Durchlaufen eines nicht dargestellten Fühlers zur Steuerung der Anzeigevorrichtung mit rotem Licht und zum Stillsetzen der Ma schine zwischen die Vorziehrollen 141.
Wie aus der Zeichnung ersichtlich, läuft der Pa pierstreifen C dann unter die Typenräder 126 und 138. Der Schnitt erfolgt automatisch an einer zwischen den Rollen 141 und den Typenrädern gelegenen Stelle.
Mit C' ist der Kontrollstreifen bezeichnet, welcher von der Rolle 142 abläuft und über die Andrückrolle 129 auf die Rolle 148 sich aufwickelt. Die Rollen 142 und 143 werden von dem gleichen bei 130 gelagerten Schwinghebel gehalten, welcher auch die An- drückrolle 129 trägt. Diese Hebel 180, führt bei jedem Arbeitsgang des Automaten zwei Schwingungen aus, weil die den Hebel 182 steuernde Scheibe zwei Nocken 184 aufweist.
Die erste Schwingung bewirkt den Druck der Fahrkarte, die sofort geschnitten und ausge worfen wird, die zweite Schwingung bewirkt den Druck auf den Kontrollstreifen gegen Ende des- Arbeitsganges, was durch den Aus wurf der Fahrkarte und die dadurch erfolgte Freilegung des Kontrollstreifens ermöglicht wird. Mit der Nockenscheibe 184 ist fest ein Nocken 144 verbunden, welcher auf den Arm 145 eines bei 146 drehbar gelagerten Doppel hebels einwirkt, dessen zweiter Arm 147 mit einem radial verlaufenden Schlitz 148 ver sehen ist.
Auf dem Zapfen 146 sitzt lose ein zweiter Hebel 149 mit einem L-förmigen Schlitz, von dem ein Teil radial verläuft und sich mit dem Schlitz 148 des andern Hebels deckt, während der Teil 150 einem Kreis bogen um den Zapfen 146 folgt. In die er wähnten Schlitze ragt ein seitlicher Zapfen 151 der Lasche 152 hinein, die am Ende des Armes 153 eines Dreiarmhebels angebracht ist, der sich um den Zapfen 154 dreht und dessen beide andern Arme 155 von einem Doppelnocken 156 gesteuert werden, welcher in noch zu beschreibender Weise von dem Summenziehhebel L verstellt wird, wenn in diesem der Schlüssel Sch. eingesteckt ist.
Bei Einstecken dieses Schlüssels und durch Drehung des Hebels L um<B>90'</B> aus der dar gestellten Lage nach rechts oder links werden die Kegelräder 157 in Drehung versetzt, der Doppelnocken 156 um 90 gedreht und der Dreiarmhebel 158,<B>155</B> um seinen Zapfen 154 gedreht, welches auch die Drehrichtung des Hebels L sein mag.
In der gezeichneten Stellung bewirkt der Nocken 144 eine, Schwenkung des Armes 145, der mittels des Lenkers 158 den Zähler Co für alle, auch die ungültigen von der Ma schine ausgegebenen Fahrkarten um einen Schritt weiterschaltet.
In dieser Stellung des Hebels L bewirkt der Nocken 144 keine Verstellung des Hebels 149 und infolgedessen auch keine Weiter schaltung des Zählers Co' für die ungültig ausgegebenen Fahrkarten allein, welcher mit dem Arm 160 des Hebels 149 mittels des Lenkers 159 verbunden ist. Wenn der Hebel L aus der dargestellten Lage um 90 heraus gedreht wird, so bewirkt die Drehung des Dreiarmhebels 158, 155 eine Abwärtsbewe gung der Lasche 152, wodurch der Stift 151 aus dem Bereich des kreisbogenförmigen Schlitzteils 150 herausbewegt wird und in die radialen Schlitze 148 der beiden Hebel 147 und 149 gelangt.
Wenn ,jetzt eine Schwenkung des Armes 145 durch den Nok- ken 144 erfolgt, so wird der Hebel 149 vom Hebel 147 mitgenommen und infolgedessen s auch der Zähler Co' weitergestellt.
Mit dem einen der vom Summenziehliebel L verstellten Keo,elräder <B>157</B> ist ein Zahnrad 161 fest verbunden, das über das Zahnrad 162 mit dem Zahnrad 163 gekuppelt ist, des sen Zapfen 164 fest die Nockenscheibe 165 trägt. Diese steuert das Ende eines Hebels <B>166,</B> dessen anderes Ende zu einem Zahn 167 ausgebildet ist. Wenn dieser gegen den An satz 168 der Klinke 169 gesenkt wird, so bringt er letztere in Eingriff mit dem das Addierwerk steuernden Zahnrad 170, und es werden daher jeweils sechs Franken regi striert, jedesmal wenn. diese eingeführt wur den und zu einem Arbeitsgang des Automa ten geführt haben.
Die Klinke sitzt an einem Hebel 171, welcher bei jedem Arbeitsgang des Automaten eine Hin- und Herschwin- gung um seinen Zapfen 172 ausführt und der mittels der Zugfeder 173 an einem zweiten Ansatz der Klinke 169 angreift. Wenn der Nocken 165 den Hebel 166 nicht anhebt, und dies ist der Fall, wenn der Sun imenzieh- hebel L in bezug auf die gezeichnete Stellung um 90 gedreht ist, so trifft der Zahn 167 den Klinkenansatz nicht, und infolgedessen tritt die Scheibe, welche durch das Zahnrad 170 das Addierwerk steuert, nicht in Tätig keit.
Wie aus den Fig. 13, 14 und 15 hervor geht, trägt das ausgegebene Billet das Da tum, im gezeichneten Beispiel der 17. Mai, die laufende Nummer aller Arbeitsgänge, die im gezeichneten Beispiel der gültigen Karte (Fig. 13) 9735 ist und nach Offnung der Tür <B>8</B> auch auf dem Zähler Co sichtbar wäre.
Wenn es sich um ungültige Fahrkarten handelt (Fig. 14, 15), so weisen diese auch die Angabe auf, ob bei der Ausgabe dersel ben das Addierwerk auf Null gestellt worden ist (Fig. 14) oder ob eine Nullstellung nicht erfolgte (Fig. 15). d. h. ob die Endsumme oder nur eine Zwischensumme gezogen wor den ist.
Handelt es sich um ein gültiges Billet g ema äss Fig. 13, so befindet sieh an der ent- sprechenden Stelle die Nummer oder dergl. <I>(45</I> T), welche den Ausgabeautomaten kenn zeichnet.
Es befindet sich ferner auf denn Billet eine Nummer (364 bezw. 365), welche angibt, RTieviel Nullstellungen bisher auf dem Zählwerk des Automaten vorgenommen wurden.
Wenn es sieh um gültige Fahrkarten handelt, so weisen diese fernerhin den hier für einkassierten Betrag auf; da dieser im Ausführungsbeispiel sechs Franken ist, zeigt das Billet gemäss Fig. 13 den Aufdruck "O(it)lI6" auf. Wenn ungültige Billets ausge geben werden, so kommt an diese Stelle der Aufdruclz. des Betra,.;
es, welcher seit der letz ten Nullstellung des Addierwerkes auf dem Automaten einkassiert worden ist, und der im Beispiel mit 18 Franken angenommen ist, daher die Angabe "00018" in Fig. 14 und 15.
Der Automat arbeitet in der folgenden Weise (Fig. 12): Die in. den Schlitz F bezw. F' eingeführte Münze JIo gelangt in den Seliaeht 53 bezw. 53', wobei bekannte, aus Gründen einer besseren Übersichtlichkeit nicht dargestellte Kontrollvorrichtungen falsche oder unzuläs sige Münzen ausscheiden. Die Münzen bilden je eine durch das Fenster 1I bezw. I1' von aussen siehth@ire Säule (Fig. 1 und 16).
Die Einführung einer Münze des niedrigeren Wertbetrages wird durch Aufleuchten einer der Glühlampen G, <B><I>...</I></B> . G,;, die Einführung einer Münze des höheren Wertbetrages durch das gleichzeitige Aufleueliten zweier Glüh lampen G, . . . . G, angezeigt.
Das Aufleuchten der Glühlampen C, . . . . G, und die Steuerung der Schlitze F und F' erfolgt in der folgenden "eise: Nach der Einführung einer Münze des niedrigeren Wertbetrages in den Sehlit.z F' gleitet dieser im Sehacht 53' abwärts, trifft dabei (nachdem sie die Kontrollvorricht.ting durchlaufen hat) auf einen Arm des um den Zapfen 55 drehbaren Hebels 54 und bringt diesen zum Ausschwingen, wodurch der be weglicheKontakt 56 mit dem festen Kontakt 57 in Berührung kommt und damit zeitweise der Erregerstromkreis 208 des Elektromagne- ten 51 geschlossen wird.
Der Elektromagnet 51 wird dadurch erregt und zieht seinen An ker 59 an, der mittels der Lasche 60 den im Zapfen 64 drehbar gelagerten Winkelhebel 62 entgegen der Feder 209 ausschwenkt. Bei der Erregung des Elektromagneten 51 dreht die Klinke 6 7 entgegen der Wirkung der Feder 210 den Sektor 69 im Llhrzeigersinne um den einein Zahn 71 entspi-cb.eilden Win- kelbetrag. Die Zahnteilung ist dabei so ge- :_:
ählt, dass beim jedesmaligen, schrittweisen Vorwärtsgang des Sektors 67 das Stromfüh- i:ungsblech 75 jeweils mit einem der Kon takte h, . . . . L, in Berührung kommt, die damit nach und nach entsprechend dem Münzeinwurf die Stromkreise der Glühlam pen G, . . . .
G, über die Leitung 211 schlie ssen, wodurch beim Einwurf der ersten Münze des niedrigeren Wertbetrages zuerst die Glühlampe G, aufleuchtet, während beim folgenden Einwurf einer Münze des nied rigeren Wertbetrages die zweite Glühlampe G. aufleuchtet, wobei die erste Lampe G, weiter leuchtet.
Da die Zähne "72 die doppelte Teilung der Zähne 71 haben, erfolgt beim Einwurf einer Münze des höheren Wert betrages (also des doppelten Betrages der ersten Münzart) in den Schlitz F und bei der dadurch bewirkten Erregung des Elektro- mag-neten 52 über das Gestänge 58, 60, 63 auch eine Winkelverstellung des Sektors 70 und damit der Stromführungsschiene 75' um den doppelten Betrag, so dass dabei beim Ein wurf der ersten Münze (des höheren Wert betrages) zuerst die beiden Glühlampen Gs und G@ aufleuchten,
während der Einwurf einer zweiten Münze des höheren Wert betrages das Aufleuchten der beiden folgen den Lampen G, und G, bewirkt, wobei die beiden Lampen GE und G, weiter leuchten.
Die Stromzuführungsschlene 75' besitzt einen sieh in radialer Richtung erstreckenden Teil 78, der einen seitlichen Ansatz 79 auf weist, wobei die Teile 78 und 79 mit den Stromführungsschienen 76 und 77 zusam= inenarbeiten. Sind fünf Münzen des, niedrigen Wertbetrages (bezw. eine,diesen Betrag aus machende Kombination der Münzen versehie- denen Wertes) eingeworfen worden, so kommt die Stromführungsschiene 76 mit dem Ansatz 79 in Berührung.
Damit wird der Erregerkreis des Elektromagneten 82 ge schlossen, der vom Pol, einer Stromquelle über die Leitung 211, die Stromführungs- schiene 75, den Ansatz 79, die Stromfüh- rungsschiene 76, die Leitung 2,12, den Elek tromagnet 82, die Leitung 200 zum andern Pol dieser Stromquelle verläuft.
Bei seiner Erregung zieht der Elektromagnet 82 seinen Anker 219 an, der mittels der Lasche 220 den I3ebel 15 so zum Ausschwingen bringt, dass dieser mit seinem Arm 15' den Schlitz F abdeckt und damit den Einwurf einer Münze des höheren Wertbetrages verhindert, so dass nur noch die am Gesamtbetrag fehlende Münze des niedrigeren Wertbetrages durch den noch nicht verschlossenen Schlitz F' ein geworfen werden kann.
Sind sämtliche zur Erreichung des .ein für a !le@mal eingestellten Bi'lletwertes notwendigen Münzen (im Bei- spiel: also sechs Münzeinheiten) eingeworfen worden, dann kommt die Stromführungs- schiene 77 in Berührung mit dem sich in radialer Richtung erstreckenden Teil 78 der Stromführungsschiene 75'.
Damit wird ein Stromkreis geschlossen, der vom einen Pol einer zweiten Stromquelle über die Leitung 211, die Strom@führungsschiene 75', Teil 78, Stromführungsschiene 77, Leitung 22.1, Elek tromagnet 222, Leitung 223, Leitung<B>213,</B> Leitung 200, zum andern Pol dieser Strom quelle verläuft.
Gleichzeitig wird ein zum eben genannten Stromkreis im Nebenschluss liegender Stromkreis geschlossen, @d-er die Leitung- 224, den Elektromagneten 94 und die Leitung 200 enthält. Der Elektromagnet 94 wird damit erregt und zieht seinen in 96 aasgelenkten Anker 95 an. Über die mit dem Arm 100 des Hebels 101 aasgelenkte Lasche 99 bringt der Anker 95 den Arm 102 dieses Hebels vor den Schlitz F', so dass' nunmehr auch keine Münze des niedrigeren Wert betrages mehr eingeworfen werden kann.
Der Elektromagnet 222 zieht bei seiner Erregung seinen Anker 2125 an, der über die Lasche s <B>926</B> den, Schalter 43' betätigt, wodurch; der Stromkreis der (beispielsweise) grünen Lampe v unterbrochen und die Stromkreise des Elektromagneten M <I>des</I> Automaten, sowie der (be-ispielsweise) roten Lampe r geschos sen werden, wodurch der Automat die Billet- ausgabe und deren Registrierung im Addier werk vornimmt.
Automat for issuing tickets of a predetermined value. The invention relates to an auto mat for issuing tickets of a vorbe, once and for all set Wer tes with means for control registration. The machine according to the invention is particularly suitable for issuing train tickets for a certain distance, but due to the great security it offers both for the owner and for the tax authorities, it can always be used to issue admission tickets of any kind and similar valuables the same set value can be used.
The distinguishing feature of the machine according to the invention is that to bring about the issue with a number of coins that can be of different value, each introduced and cashed coin the adjustment of the respective type of coin associated movable member by an amount equal to the coin value ver brings about, and that the movable links only when the predetermined bill is reached:
etwert, by guiding and collecting coins into a position in which they close the power for the drive motor of the machine, which prints the ticket and the control strip and advances the adder and a counter, the latter the number of operations of the Automatic machine including those for test and control purposes, which the latter are recorded separately by a second counter.
In the drawings, as an embodiment of the invention, an automatic mat for issuing train tickets is shown schematically, which at a certain value, for example 6 francs, by throwing i @ fünzen, z. B. at one franc and two francs can be taken.
1, 2 and 3 show the machine from the outside, namely Fig. 1 is a front view of the closed machine from the user side, Fig. 2 is a side view with the viewing door removed, which is generally closed and locked by a key showing the counters and the pull-together lever; Fig. 3 is a basic plan of the closed machine; Fig. 4 is a larger scale from a section from FIG. 2;
FIG. 5 shows, on an even larger scale, the device for setting the date to be printed on the ticket and the control strip, which device would become visible in FIG. 1 if the generally closed inspection door were removed; Fig. 6 is a detail of the device controlled by the inserted and accepted coins which, upon passage of each coin, activates the device shown in Figs. 9 and 10;
7 shows the button, which is also visible in FIGS. 2 and 4, which is located under the viewing door and with which the machine can be run if the sum lever has previously been turned to the right or left by 90 with respect to the position in FIG. ? and 4 has been rotated; Fig. 8 is a detail of the automatic device for closing the insertion slots when the paper tears or approaches the end, as soon as the certain value is inserted.
The device also closes the slot for the coin of higher value if the insertion of another such coin would exceed the specified amount. Furthermore, the device is drawn which at the end of a work cycle of the machine automatically exposes the slots again and the device is completely in the starting position according to FIGS. 9 and 1 (1 cited;
G. 9 and 10 show the two parts placed on the same axis, which form the central device; the same effects the illuminated display of the inserted coins, the control of the focal plane shutter device and the start-up of the machine.
if he has collected the certain total amount of inserted coins; 11 shows the printing device and
EMI0002.0043
the <SEP> drive <SEP> the <SEP> two <SEP> counters, <SEP> from <SEP> those <SEP> the
<tb> one <SEP> all <SEP> operations <SEP> of the <SEP> -7 \ -automat <SEP> records, <SEP> during <SEP> the <SEP> other <SEP> only <SEP> die <SEP> Control hangings <SEP> counts, <SEP> with <SEP> @ t-elchen <SEP> worthless <SEP> tickets <SEP> with <SEP> or <SEP> without <SEP> zero setting <SEP> de :; <SEP> Label the counter <SEP> with <SEP> and the <SEP> key press <SEP>
<tb> output <SEP> are:
<tb> Fig. <SEP> 12 <SEP> shows:
<SEP> the <SEP> essential <SEP> part <SEP> of the
<tb> electrical <SEP> circuit diagram <SEP> of the <SEP> machine:
<tb> Fig. <SEP> 13. <SEP> 14 <SEP> and <SEP> 15 <SEP> show <SEP> three <SEP> examples
<tb> Outgoing <SEP> tickets, <SEP> and <SEP> although <SEP> shows
<tb> Fig. <SEP> 13 <SEP> a <SEP> valid <SEP> billet, <SEP> like <SEP> it <SEP> when <SEP> working <SEP> of the <SEP> machine <SEP> by <SEP> introduction, <SEP> by
<tb> Coins <SEP> in <SEP> your <SEP> fesi-occasion: en <SEP> total value <SEP> received <SEP>;
<SEP> Fig. <SEP> 1.:1 <SEP> and <SEP> 15 <SEP> show <SEP> worthless
<tb> Fahrkari: en, <SEP> as <SEP> they <SEP> is called <SEP> the <SEP> control <SEP> des
<tb> Autoina.ten <SEP> can be obtained <SEP> by <SEP> pressing <SEP> of the <SEP> mentioned <SEP> hand button <SEP>, <SEP> whereby
<tb> Fig. <SEP> 14 <SEP> the <SEP> Silniinenrefdriiclz <SEP> in the <SEP> case <SEP> one
<tb> Zero setting <SEP> <B> (NS). </B> <SEP> Fig. <SEP> 15 <SEP> in <SEP> case <SEP> without
<tb> Zero setting <SEP> (0 <SEP> N) <SEP> shows.
<tb> The <SEP> essential <SEP> features <SEP> of the <SEP> shown <SEP> machine <SEP> are <SEP> the following <SEP>:
<tb> 1. <SEP> option. <SEP> the <SEP> output <SEP> of the <SEP> ticket <SEP> with <SEP> any <SEP> any <SEP> combination <SEP> of
<tb> (for <SEP> the <SEP> machine) <SEP> -valid <SEP> coins <SEP> to <SEP> aim, <SEP> which <SEP> together <SEP> the <SEP> determined < Form SEP> amount <SEP>.
<tb> 2. <SEP> Leuelit control <SEP> of <SEP> successive <SEP> @inka <SEP> ssiei:
un \ <SEP> en <SEP> of the <SEP> introduced <SEP> coins <SEP> through <SEP> the <SEP> machine.
<tb> 3. <SEP> Automatic = the <SEP> lock <SEP> of the <SEP> insertion slots <SEP> for <SEP> the <SEP> various <SEP> coins, <SEP> if
<tb> the <SEP> inclusion <SEP> @ further <SEP> coins <SEP> would exceed the <SEP> specific <SEP> amount <SEP> <SEP>.
<tb> 4. <SEP> Visibility <SEP> of the <SEP> inserted <SEP> coins.
<tb> 5. <SEP> Possibility to <SEP> all <SEP> collected <SEP> coins
<tb> to <SEP> to <SEP> achieve <SEP> of the <SEP> total amount <SEP> like the <SEP> to withdraw.
<tb> 6. <SEP> Nominal <SEP> the <SEP> certain <SEP> amount <SEP> reached
<tb> is, <SEP> <SEP> the <SEP> machine <SEP> starts <SEP> automatically.
<SEP> adjusted
<tb> the <SEP> counter, <SEP> the <SEP> devices <SEP> for <SEP> automatic <SEP> registration <SEP> etc., <SEP> prints <SEP> the
<tb> Ticket <SEP> and <SEP> the <SEP> control strip.
<tb> 7. <SEP> L: he <SEP> Automat- <SEP> leaves <SEP> two <SEP> different
<tb> working methods. <SEP> The <SEP> first <SEP> operating mode is <SEP>
<tb> brought about by <SEP> the <SEP> audience <SEP>; <SEP> the second mode of operation, which is carried out for control purposes, can only be brought about by the monitoring staff.
The first work is automatically brought about by throwing in and collecting the coins, the number of operations performed in this way by the machine being added in an adding unit. The second working method is done by hand after the corresponding setting of the sum pull lever by pressing a button. This button is not available to the general public, but only to the monitoring staff. The corresponding operation is also counted in the first adder when the machine is operated manually by the monitoring staff.
This operation is registered at the same time, but also in a second adding unit. The difference between the numerical data of the first and the second adder represents the number of valid tickets issued by the machine. This number, multiplied by the ticket price, results in the amount taken by the machine and must be compared with the amount drawn on the invalid ticket and on the The amount printed on the control strip.
During the reading and inspection rounds, for example to adjust the section paper, the output sections are automatically canceled by easily perceivable characters or inscriptions. For example, there is a red stripe or the red label. "invalid" or a combination of the two or other characters in red in question.
B. The machine is provided with two counters, one of which is the work courses of the machine during the test run to adjust the; Section paper, as well as during the control and when drawing the sum, while the other only records the sections or billets issued for test purposes and reading.
9. When the machine is idle and ready to work, a white lamp lights up, which not only indicates the operating status of the machine, but also illuminates the instructions for use for the public. As soon as the machine starts up, it extinguishes the white light and a red lamp lights up, which remains bright as long as the machine is running, i.e. H. until the end of the work process and indicates that it is working properly. At the end of the work cycle, the white lamp lights up again. If the red light does not go out, this means that the machine is defective. In this case, the automatic closure of the coin slots comes into effect.
There is also a green lamp which lights up when the strip forming the sections or the control strip breaks or approaches the end; the white lamp goes out and the slot is closed. The device that the green lamp to. Lights up, is arranged in such a way that it guarantees the output of the section in preparation under all circumstances. For this purpose, the sensor of the device is arranged at a distance from the interface, wel cher is greater than the billet length.
10. A special device allows the public to remove the coins if the machine has not yet started.
As can be seen from FIGS. 1 to 3, the machine consists of a base with a door S 'through which is closed by a key lock. which one can get to the coin collecting sack, and from an attachment on which the insertion flashes F and F ', two glasses H and H' for tracking the inserted coins until the certain amount is formed, light bulbs G, which light up when the coins are inserted , and a label Q with the instructions for use are provided.
When the machine is idle and ready for use, panel Q is illuminated in white. It is illuminated red by the lamp R when the machine is working or not ready for action. The green lamp V is used for lighting when the paper for the tickets or the control strip tears or runs out. The pot, where the base and the top meet, is an opening B from which the thrown coins can be removed by pressing the button 122, as long as the machine has not yet started.
The essay, which holds the various gears and the printing and registration device ent, is provided with a door S. which is also under a key lock and after opening it, adjust the sum pull lever and then press the hand button 7 'and also the button Z (Fig. 5) to adjust the a.ufziidrucli:
can adjust the ending date. D1an can also press button 25 (FIG. 8), which after any restoration or after use of the paper frees the slots F and F 'from the locking arms 15 and 17, which these had automatically closed when the paper tore or ended .
This device works as follows: If the paper tears or approaches the end, but is still long enough .. to form the billet being prepared, a sensor on the cut and control strip closes the excitation circuit of the electromagnet 1 (Fig. 8). This attracts the armature 2, wel cher lever-like pivoting about the pin 3 and engages with a second arm by means of the pin 5 in the slot 6 of the tab 7 a. This flap is aasgelenken at 8 on a four-arm lever which is rotatable about the pin 10.
On his arm 11, the Len ker 12 is articulated, the slot 13 of which encloses the pin 14 on the arm 15, which can block the slot F for inserting the 2-franc coin and is rotatable about the pin 16. The arm 17 of the four-arm lever mentioned can block the slot F 'for inserting the 1-franc coin. As is readily apparent, when the armature 2 is tightened, the two arms 17 and 15 move into the position in which they close the insertion slots assigned to them.
Against the fourth arm 18 of the four-arm lever of the spring 19 of the lever 20 rotatable about the pin 21 is pressed. The link 22, which leads to the angle lever 23 rotatable about the pin 21, acts on it. : In your second arm of this angle lever 23 you can let the push button 25 attack, which is not generally accessible. When the armature 2 is tightened by the electromagnet 1, the lever 20 snaps into a pawl-like manner behind the arm 18 of the four-arm lever, thus locking it in the position in which it closes the slot F 'with the arm 17.
The lever 27, which is rotatable about the pin 28 and on which the spring 29 engages, acts in a similar way on the arm 26 of the lever with the locking arm 15 for the slot F. If the arm 1 5 brings the arm 15 through the slot F when the anchor 2 is pulled by the electromagnet 1 of the Len ker, the pawl 27 snaps behind the arm 26. and the spring 29 therefore holds the arm 15 in Schliessslelliuig.As the spring 19 secures the arm 17 over the slot F ', and this also when the excitation of the electromagnet I ceases.
The supervisor is then alerted by the lighting up of the green lamp and can use the key to open the door S "of the machine in order to replace the out-of-paper or to fix the torn strip. She then presses, but Before closing the machine, the button 25 is pressed down, where the pawl 20 moves down and releases the arm 18 of the four-arm lever so that it is rotated again by the spring 30 into the position in which its arm 17 closes the slot F ' exposed.
Before closing the machine and after pressing button 25, the operator should move the sum pull lever 1 out of the position shown in FIGS. 2 and 4 by <B> 90 '</B> to the right or left on the green symbol <I Turn> v </I> or the red <I> r </I> sign, depending on whether you have a long key or a short key, the latter of which only allows the lever to be set to sum pull without zeroing, the former on the other hand, the total move is also permitted with zero setting. In this position of the sum pull lever L, the operator can start the machine if he has previously pressed the key T (FIGS. 4 and 11).
This press down can of course not be made if the Hehel L has not been adjusted before. Because under the button there is a huppeltes wheel with the lever L, which has two notches 31, 32 (Fig. 11). The button T can only be depressed when one of the cuts is below it, and this is only the case when the lever L is in the sum pull position. Otherwise the T key would hit the full part of the wheel.
When the T key is depressed, the machine is electrically started. For this purpose, the button T according to FIG. 7 with a lateral pin 32 'see ver, which engages in the fork 33 of a lever 34, 36 rotatable about the pin 35.
On the arm 36 of this lever, a small plunger 3 7 is articulated, which presses with its free end on the lever 38 mounted at 39, which is provided with the movable contact 43 Kon. This is brought into contact with the fixed contact 44 and thereby closes the excitation current for the drive motor of the au tomaien by pressing the T button.
When the machine is running, the sector-shaped cam 45, which can be seen in FIG. 8 and rotatable about the pin 46, swings out of the position shown to the left, where the roller 47 moves out of the dotted position into which it is when the last coin is collected the previous value formation had been brought into the fully drawn position. The role sits on a tab 48, which is guided and hinged to the arm 49 of the aforementioned, pawl-like lever 27.
It is therefore lowered this lever, and it releases the arm 26, whereby the locking arm 15 is returned by the spring 50 from the position in which it blocks the slot F in the release position.
Since, as will be shown, the automatic start-up of the machine closes the two slots F and F 'by means of the arms 15 and 102, the cam 45 also causes these two slots to be released at the end of an operation of the machine.
The coins Ho are thrown into the shaft 53 (Fig. 6) out, and after passing through a customary testing device which ejects invalid coins, arrive at a point which can be seen through the inspection glass <I> H </I> respectively . <I> 11 '</I> (Fig. 1) is visible.
Means are provided for light control of the coins introduced into and removed from the machine. Since a value of six francs is assumed in the illustrated embodiment, which can be enough with coins for one and two francs, a number of six bulbs G is provided. For every 2-franc coin that is inserted, two lamps light up from top to bottom, while for each 1-franc coin inserted, one lamp lights up from bottom to top. In this way, it is possible to use the thirteen conceivable combinations of coins one or two or one and two francs to form the sum of six francs provided for the issue of the ticket.
The device that causes the incandescent lamps to light up and controls the slots F and F 'in such a way that the one for the 2-franc coin closes as soon as coins with a total value of five francs are inserted, while the other one is also closed when the Total sum of six francs is reached, and which automatically opens the seat swivel again after the end of the operation, the following through the passage of coins to one and two francs are by means of the device shown in FIG. 6, two electric magnets 51 respectively. 52 (Fig. 9) excited,
while the coins pass through the assigned shaft 53 behind the windows <I> H. H '</I> run. Because in the shafts protrudes an arm 54 of a rotatably mounted lever at 55: into, the rear arm of the movable union contact 56 to the fixed contact. 5 brings 7. In this way, the electric magnet 51 BEZW. 52 with each passage of a coin to a respectively. two francs is charged because the coins themselves cause the lever 54 to pivot.
As can be seen from Fig. 9, the armature 58, 59 of these electromagnets when they are excited via the tabs 60 respectively. 61 and via the angle lever 6? respectively 63 with the second arms 65 respectively. 66 same a pivoting of the pawls 67, which respectively the sectors 69. Set 70 in rotation.
For this purpose, the sectors with ratchet teeth 71 respectively. 72 provided. The lever dimensions are chosen such that the stroke of the pawl 68 is twice as great as that of the pawl 67. Therefore, with each pulse, the sector 70 experiences twice as large an adjustment as that of the sector 69. 83 and 84 are the pawls, which are the Sectors secure in the respective positions reached when the angle levers 62, 65 and 63, 66 go back to the starting position.
Sectors i3 'and 74 of insulating material, shown in FIG. 10, are fixedly connected to sectors 69 and 70. The two sectors 73 and 74 each carry a current guide plate 75, 75 'which extends over their entire circumference. The sector 73 also carries two curved busbars 76 and 77 on the front, which protrude towards the front in the direction of the sector 74. This is provided after the pivot point to with a rail 78, wel che a projection 79 has.
On the sheets 75 and 75 ', the sliding contacts 80 and. 81, which are included in the excitation circuit for the drive motor M 'of the automatic device.
The rail 7 7 is electrically connected to the 31otorlueis, as the rail 78 stäudi6 is connected to the sheet metal 75 '. The sectors 73 and 74 are adjusted in such a way that when the fifth franc is thrown in, the rail 76 comes into contact with the projection 79 of the rail 78, causing the electromagnet 82 to excite and adjust the lever in a manner to be described below is, which carries the arm 15 to close the insertion slot F of the? -Frankencoins.
A further adjustment of the sector 73 also brings the rail 7 7 into contact with the rail 78, whereby the excitation current for the motor is closed and the machine is put into operation for tlusgabe a ticket in a manner to be described.
During the successive adjustments of the sectors 73 and 74, their metal sheets 75 and 75 come to the contacts L1, L._, L3. . . . L "</I> to the concern, whereby the above-mentioned control lamps G are switched on.
Since the sector 74 is twice as far as the sector 73, it causes two lamps to be switched on with each adjustment, while the other sector only switches on one lamp and this in the opposite direction, so that the one described above The type of lighting up.
When the operation is carried out, i.e. H. the printing, the issuing of the ticket and the collection of the amount have been carried out in a manner to be described, the machine with the entire gear unit must return to the starting position shown above.
The pawls 83 and 84 (Fig. 9), which the sectors 69 wid 70 in. The Stel lungs hold in which they are brought with each pulse by an inserted coin from the pawls 6 7 and 68 when they are brought by the levers 65 and 66 are disengaged and brought into the starting position when the above-mentioned impulses cease, are in contact with the approaches of the pawls 67 and 68.
In order to be able to change the coin combination at will within the maximum limit given by the end of the sector positions (issuing position), the sector (73, 74) is under the action of a step cam (190, 191). The adjustment of a stepped cam to a higher level, e.g. B. to the next higher level, causes the adjustment of the related sector by a step in Rieh device towards the end position.
The sector therefore moves one step less until it reaches the end position in which its busbar comes into contact with the busbar of the other sector and returns to its starting position (zero position), which is one step closer to this end position. It therefore needs a corresponding coin less to be inserted in order to close the output circuit, if the other sector has not just been adjusted by its cam.
Bezw by corresponding approach of one or the other sector or both sectors. by their corresponding distance from this position any combination of coins can be achieved, so that the machine can be quickly and easily switched to any other output amount. The height of the cam steps is the adjustment of the associated sector caused by a switching tooth in proportion; the steps of the cam 191 thus have twice the height of the corresponding steps of the cam 190, so that the adjustment of the cam 191 by one step adjusts the associated sector by twice the amount than the adjustment of the cam 190 by one step in the sector 73 the case is.
The head of the pin 85 (FIG. 8), which is controlled by the lever 86 rotatable about the pin 87 and located under the lugs of the pawls 67 and 68, serves to control the entire device according to FIGS. 9 and 10 at the end of an operation return the machine to its starting position. The lever 86 is provided with an arm 88, on which the arm 89 of a three arm lever rests, which is rotatable about the pin 90. On the arm 91 of the same, the cam 92 engages on the shaft 93, uJelche executes a rotation of 360 <B> '</B> with each operation of the machine.
In this way, at the end of the operation, the cam 92 lifts the pin 85, which lifts the approaches of the pawls 67 and 68, disengages them from the teeth 71, 72 of the sectors, and at the same time onto the approaches of the pawls 83 and 84 acts to move them out of these gears. The springs attacking all levers etc. bring the device back to its zero position at the end of the operation.
As when collecting the fifth coin, the excitation current for the electromagnet 82 closes via the plate 76 and the projection 79 and blocks the slot F via the arm 15, so causes the collection of the sixth franc by closing the motor circuit via the rail 77 and the rail 78 (Fig. 1.0) also the Stromzufüh tion to an electromagnet 94 (Fig. 8), whose oscillating around the pin 96 An ker 95 with his arm 97 respectively. the pin 98 of which pulls the handlebar 99 up, the lower end of which is articulated on the arm 100 of a three-arm lever which can rotate about the pin 101.
The arm 102 of the same then goes into the position in which it closes the slot F 'for the 1 franc coins. On the short arm 103 of this lever engages the pawl 104 stored at 105 ge, the arm 106 with means of the tab 108 with slot 109 is connected to the arm 111 with pin 110, wel cher a part of the above-mentioned pawl 27 forms, which engages the part 26 of the locking arm 15 for the 2-franc slot F.
In this way, the 1-franc slot F 'can be closed when the machine starts up, after the 2-franc slot has already been closed after five francs have been introduced. The release of the locking arm 15, 26 for the slot F from the pawl 27, which took place by the rotation of the cam 92 at the end of the operation, also causes the pawl 27 to move out of the position in view of the connection of the latter with the pawl 104 via the link 108 which it secures the locking arm 102, 103 for the slot F 'in the closed position.
After disengagement, the springs 50 and 50 'cause the arms 15 to swing back, respectively. 102 in the release position.
The row of coins for one franc as well as two francs, which is formed behind the windows <I> H </I> and Il ', is held by the support 112, which is rotatable about the pin 46 and with the sector - Shaped cam 45 is firmly connected. The support 112 has an extension 113 on which a relatively weak spring 114 engages. A three-arm lever sits loosely on the same pin 46, the arm 115 of which is pressed against a fixed stop 116 by a forceful spring 117 which engages the arm 118, while the third arm 119 is provided with an adjustable stop 120 against the support 112 .
The already mentioned lever 89, 91, which is rotatable about the pin 90 and controlled by the cam 92, is provided with a further arm 121 which, when the cam runs up, causes the support 11 \ Z to oscillate in the direction of the arrow d by whose approach 113 raises. As a result of this pivoting of the support, the coins held laterally in the guides slide off the edge of the support 112 and pass through a channel (not shown) into the collecting bag.
The machine is provided with means with which the public can take the coins again before they roll into the collecting bag. The push button 122 protruding from the machine housing is used for this purpose (Fig. 1 and 8), which is provided with a pin 123 on the side and a slot at the end in which the pin
EMI0008.0019
124 <SEP> on <SEP> your <SEP> already <SEP> mentioned <SEP> lever <SEP> 86 <SEP> engages.
<tb> A <SEP> pressing <SEP> of the <SEP> button <SEP> 122 <SEP> causes <SEP> initially:
<SEP> through <SEP> the <SEP> shift <SEP> of the
<tb> pin <SEP> 124 <SEP> a <SEP> view, extension <SEP> of the <SEP> lever <SEP> 86
<tb> and <SEP> with <SEP> a <SEP> lifting <SEP> of the <SEP> pin <SEP> 85. <SEP> wel rather <SEP> the <SEP> EinriclitZmg <SEP> to the <SEP> indicator light <SEP> the
<tb> imported <SEP> coins <SEP> and <SEP> for <SEP> starting <SEP> of the
<tb> Machine <SEP> with <SEP> full <SEP> introduction <SEP> of the <SEP> certain <SEP> value <SEP> leads back to <SEP> zero position <SEP>.
<SEP> Then <SEP> causes <SEP> the <SEP> lateral <SEP> pin
<tb> 123 <SEP> one <SEP> turn "- <SEP> of the <SEP> three-arm lever <SEP> 115,
<tb> 118, <SEP> 119, <SEP> so <SEP> that <SEP> strengthens the <SEP> voltage <SEP> of the <SEP>
<tb> Spring <SEP> <B> 117 </B> <SEP> overcome <SEP>, <SEP> and <SEP> the <SEP> on <SEP> the
<tb> arm <SEP> 113 <SEP> acting <SEP> selswaclxe <SEP> spring <SEP> 114 <SEP> die
<tb> Support <SEP> 11.2 <SEP> in <SEP> opposite to the <SEP> arrow <SEP> d <SEP>
<tb> direction <SEP> rotates,
<SEP> whereby <SEP> the <SEP> over <SEP> the <SEP> support
<tb> 1l \ 3 <SEP> <SEP> coins <SEP> lying in front of <SEP> unroll this <SEP>
<tb> and <SEP> to <SEP> a <SEP> corresponding <SEP> output opening
<tb> 13 <SEP> arrive.
<tb> If <SEP> you <SEP> the <SEP> under <SEP> key lock
<tb> standing <SEP> door <SEP> 8 <SEP> of the <SEP> machine <SEP> opens, <SEP> so <SEP> reaches <SEP> nian <SEP> to <SEP> the <SEP> rotatable <SEP> button
<tb> 1 <SEP> 1 @ '_ <SEP> i @. <SEP> a <SEP>), <SEP> the <SEP> around <SEP>; a <SEP> Aeliscdrelxbar <SEP> and <SEP> m:
t
<tb> a <SEP> window <SEP> is firmly <SEP> connected <SEP>, <SEP> which <SEP> the
<tb> Numbers <SEP> 1 <SEP> to <SEP> 31 <SEP> corresponding to <SEP> has the <SEP> days of the month <SEP>. <SEP> A <SEP> suitable <SEP> gear ratio <SEP> brings <SEP> also <SEP> a <SEP> second, <SEP> equiaxed
<tb> to the <SEP> first <SEP> loving <SEP> disc <SEP> in <SEP> rotation, <SEP> open
<tb> which <SEP> the <SEP> Honatsnaxnen <SEP> written <SEP> are,
<tb> so <SEP> that <SEP> naeli <SEP> run through <SEP> of the <SEP> 31 <SEP> digits <SEP> the
<tb> Labeling <SEP> of the <SEP> niielisten <SEP> month <SEP> is provided for <SEP>.
<tb> On the <SEP> morning <SEP>,
every <SEP> day <SEP> can <SEP> the <SEP> operator <SEP> through <SEP> the <SEP> observation window
<tb> with <SEP> the <SEP> button <SEP> X <SEP> the <SEP> respective <SEP> tag <SEP> and
<tb> Set month <SEP>. <SEP> From <SEP> the <SEP> two <SEP> discs
<tb> are <SEP> type wheels <SEP> controlled, <SEP> which <SEP> loosely <SEP> on
<tb> a <SEP> common <SEP> Aelise <SEP> 125 <SEP> sit. <SEP> which
<tb> according to <SEP> Fig. <SEP> 1.1 <SEP> one <SEP> another <SEP> type wheel <SEP> with
<tb> Cam <SEP> <B> 127 </B> <SEP> carries. <SEP> On <SEP> the <SEP> wheel <SEP> 126 <SEP> are <SEP> three
<tb> Type protrusions <SEP> 128 <SEP> provided.
<SEP> The <SEP> label <SEP> of the <SEP> first <SEP> reads <SEP> <B> "ON" </B> <SEP> = <SEP> without
<tb> Nullstelluiib, <SEP> the <SEP> second <SEP> label is <SEP>
<tb> "N" <SEP> = <SEP> number <SEP> and <SEP> <SEP> is used to <SEP> differentiate <SEP> the <SEP> machine <SEP> from <SEP> others. <SEP> The <SEP> third
<tb> 13eselii-: ftun, #; <SEP> Iautei <SEP> <B> "NS" </B> <SEP> = <SEP> zero setting.
<tb> These <SEP> characters <SEP> are printed <SEP> both <SEP> on <SEP> the <SEP> ticket and on the control strip, as will be described later.
The pressure is applied by the pressure roller 129, which is held by the lever 180 'mounted at 180. This lever is connected by means of the handlebar 131 to the angle lever 1'32 which can be rotated about the pin 188 and which is controlled by the cam 134, which executes a complete rotation with each work cycle of the machine.
The cam 127 on the type wheel 126 controls the lever 135 which is rotatable about the pin 136 and on which the spring 187 engages. The lever. 135 carries a pressure roller 138 and a dye roller 139 for this, in order to print conspicuously colored invalidation marks on the tickets incurred during a test run or in the case of total readings of the machine. The paper strip C, from which the tickets are cut, runs off the roll 140 and, after passing through a sensor (not shown) for controlling the display device with a red light and for stopping the machine, passes between the pull-out rolls 141.
As can be seen from the drawing, the paper strip C then runs under the type wheels 126 and 138. The cut is made automatically at a point located between the rollers 141 and the type wheels.
The control strip, which runs off the roll 142 and winds up onto the roll 148 via the pressure roll 129, is denoted by C '. The rollers 142 and 143 are held by the same rocker arm, mounted at 130, which also carries the pressure roller 129. This lever 180 executes two oscillations during each operation of the machine because the disc controlling the lever 182 has two cams 184.
The first oscillation causes the ticket to be printed, which is immediately cut and thrown out, the second oscillation causes pressure on the control strip towards the end of the operation, which is made possible by the ejection of the ticket and the resulting exposure of the control strip. With the cam disk 184, a cam 144 is fixedly connected, which acts on the arm 145 of a rotatably mounted at 146 double lever, the second arm 147 is seen with a radially extending slot 148 ver.
On the pin 146 sits loosely a second lever 149 with an L-shaped slot, part of which extends radially and coincides with the slot 148 of the other lever, while the part 150 follows a circle around the pin 146. A lateral pin 151 of the tab 152 protrudes into the slots mentioned, which is attached to the end of the arm 153 of a three-arm lever which rotates around the pin 154 and whose two other arms 155 are controlled by a double cam 156, which is still closed is adjusted descriptively by the sum pull lever L when the key Sch. is plugged in.
When inserting this key and by turning the lever L by <B> 90 '</B> from the position shown to the right or left, the bevel gears 157 are set in rotation, the double cam 156 is rotated by 90 and the three-arm lever 158, <B > 155 </B> rotated about its pin 154, whatever the direction of rotation of the lever L may be.
In the position shown, the cam 144 causes the arm 145 to pivot, which, by means of the handlebar 158, advances the counter Co for all tickets, including the invalid tickets issued by the machine, by one step.
In this position of the lever L, the cam 144 does not move the lever 149 and consequently does not switch on the counter Co 'for the tickets that are not validly issued, which is connected to the arm 160 of the lever 149 by means of the handlebar 159. When the lever L is rotated 90 out of the position shown, the rotation of the three-arm lever 158, 155 causes the tab 152 to move downwards, whereby the pin 151 is moved out of the area of the arcuate slot part 150 and into the radial slots 148 of the two levers 147 and 149 arrives.
If the arm 145 is now pivoted by the cam 144, the lever 149 is carried along by the lever 147 and, as a result, the counter Co 'is also incremented.
A gear 161, which is coupled to gear 163 via gear 162, whose pin 164 securely carries cam disk 165, is fixedly connected to one of the Keo, elräder <B> 157 </B> adjusted by Summenziehliebel L. This controls the end of a lever 166, the other end of which is designed as a tooth 167. If this is lowered against the approach 168 of the pawl 169, it brings the latter into engagement with the gear 170 controlling the adder, and therefore six francs are registered each time. these were introduced and led to an operation of the machine.
The pawl sits on a lever 171, which oscillates back and forth around its pin 172 with every operation of the machine and which, by means of the tension spring 173, engages a second attachment of the pawl 169. If the cam 165 does not lift the lever 166, and this is the case when the pull lever L is rotated by 90 with respect to the position shown, the tooth 167 does not hit the ratchet shoulder, and as a result the disc will kick which by the gear 170 controls the adder, not in action.
As can be seen from FIGS. 13, 14 and 15, the issued billet bears the date, in the drawn example of May 17, the consecutive number of all operations, which is 9735 in the drawn example of the valid card (FIG. 13) and after opening the door <B> 8 </B> would also be visible on the counter Co.
If the tickets are invalid (Fig. 14, 15), they also indicate whether the adder was set to zero when they were issued (Fig. 14) or whether they were not reset (Fig. 15). d. H. whether the total or just a subtotal has been drawn.
If it is a valid ticket according to FIG. 13, the number or the like (45) which identifies the dispensing machine is located in the appropriate place.
There is also a number (364 or 365) on the billet, which indicates that many zero settings have been made on the counter of the machine so far.
If the tickets are valid, they also show the amount collected here; since this is six francs in the exemplary embodiment, the ticket according to FIG. 13 shows the imprint "O (it) lI6". If invalid tickets are issued, this is where the imprint appears. des Betra,.;
it is the one that has been collected on the machine since the adder was last reset and that is assumed to be 18 francs in the example, hence the specification "00018" in FIGS. 14 and 15.
The machine works in the following way (Fig. 12): The in. The slot F respectively. F 'introduced coin JIo arrives in the Seliaeht 53 respectively. 53 ', known control devices, not shown for the sake of clarity, separate out false or inadmissible coins. The coins each form one respectively through the window 1I. I1 'from the outside see the column (Fig. 1 and 16).
The introduction of a coin of the lower value is indicated by one of the light bulbs G, <B><I>...</I> </B>. G,;, the introduction of a coin of the higher value due to the simultaneous lighting of two incandescent lamps G,. . . . G, displayed.
The light bulbs C,. . . . G, and the slots F and F 'are controlled in the following way: After a coin of the lower denomination has been introduced into the Sehlit.z F' this slides down in the slot 53 ', hits (after it has ting the control device has passed) on an arm of the lever 54 rotatable about the pin 55 and causes it to oscillate, whereby the movable contact 56 comes into contact with the fixed contact 57 and thus the excitation circuit 208 of the electromagnet 51 is temporarily closed.
The electromagnet 51 is thereby excited and attracts its anchor 59, which swings out the angle lever 62 rotatably mounted in the pin 64 against the spring 209 by means of the tab 60. When the electromagnet 51 is excited, the pawl 6 7 rotates the sector 69 counter to the action of the spring 210 in a clockwise direction by the angular amount corresponding to the tooth 71. The tooth pitch is as follows: _:
This means that every time the sector 67 progresses step-wise, the current-guiding plate 75 is connected to one of the contacts h,. . . . L, comes into contact, which gradually changes the circuits of the incandescent lamps G, according to the coin slot. . . .
G, via line 211, which means that when the first coin of the lower value is inserted, the incandescent lamp G, lights up first, while the second incandescent lamp G. lights up when a coin of the lower value is inserted, with the first lamp G, still on .
Since the teeth ″ 72 have twice the pitch of the teeth 71, when a coin of the higher value (i.e. double the amount of the first type of coin) is inserted into the slot F and when the electromagnet 52 is thereby excited via the Linkage 58, 60, 63 also adjusts the angle of the sector 70 and thus the current-carrying rail 75 'by twice the amount, so that when the first coin (of the higher value) is inserted, the two light bulbs Gs and G @ light up first,
while the insertion of a second coin of the higher value causes the two lamps G, and G, to light up, whereby the two lamps GE and G, continue to light.
The power supply slot 75 'has a part 78 which extends in the radial direction and which has a lateral projection 79, the parts 78 and 79 working together with the power supply rails 76 and 77. If five coins of the low value amount (or a combination of coins of different value that make up this amount) have been inserted, the current-carrying rail 76 comes into contact with the projection 79.
This closes the excitation circuit of the electromagnet 82, the one from the pole, a power source via the line 211, the power supply rail 75, the extension 79, the power supply rail 76, the line 2, 12, the electromagnet 82, the line 200 runs to the other pole of this power source.
When it is excited, the electromagnet 82 attracts its armature 219, which by means of the tab 220 causes the lever 15 to oscillate in such a way that it covers the slot F with its arm 15 'and thus prevents the insertion of a coin of the higher value, so that only The coin of the lower value that is missing from the total amount can still be inserted through the not yet closed slot F '.
If all the coins required to achieve the bi'llet value set for a! Le @ mal (in the example: six coin units) have been inserted, the power supply rail 77 comes into contact with the part 78 extending in the radial direction the current guide rail 75 '.
This closes a circuit that is connected to one pole of a second power source via line 211, current guide rail 75 ', part 78, current guide rail 77, line 22.1, electromagnet 222, line 223, line 213, </ B > Line 200, to the other pole of this power source runs.
At the same time, a circuit which is shunted to the circuit just mentioned is closed, which includes the line 224, the electromagnet 94 and the line 200. The electromagnet 94 is thus excited and attracts its armature 95, which is steered in 96. The armature 95 brings the arm 102 of this lever in front of the slot F 'via the tab 99, which is articulated with the arm 100 of the lever 101, so that it is no longer possible to insert a coin of the lower value.
When excited, the electromagnet 222 attracts its armature 2125, which actuates the 'switch 43' via the tab s 926, whereby; the circuit of the (for example) green lamp v is interrupted and the circuits of the electromagnet M <I> of the </I> machine, as well as the (for example) red lamp r are fired, which causes the machine to issue and register tickets in the addition works.