Wechselstrommagnet mit beweglichem Anker. Unangenehm istbei Wechselstrommagneten mit beweglichen Ankern das Geräusch in Form eines Brummens. Es tritt auf durch die Ummagnetisierung des Ankers und die dadurch verursachten mechanischen Wirkun gen des Ankers auf seine Lagerung und die Spuleneinzelteile.
Man hat versucht, das Geräusch dadurch zu vermindern, dass man den Anker genau in der Mitte der Spule anordnete; dann sind wenigstens die seitlichen Kräfte aufge hoben oder dadurch, dass man die Anker führung möglichst ohne Spiel ausführte und dann, dass man den der Wirbelströme wegen aus einzelnen Blechen bestehenden Anker durch hydraulische Pressung und Nietung zu einem möglichst kompakten Körper zu sammenbrachte. Das Geräusch der Spule wurde dadurch verringert, dass man die Be wegung der einzelnen Spulenwindungen ge geneinander und gegen die Spulenflanschen durch feste Einlagerung der Windungen in eine Kompoundmasse oder in Kunstharz ver hinderte.
Die auf dem vorbezeichneten mechanischen Wege angestrebte Geräuschlosigkeit ist recht unvollkommen und muss es auch bleiben, denn bei einem beweglichen Anker muss immer Spiel in der Führung und Lagerung sein.
Wenn aber nach der Erfindung Anker, Kern und Joche statt aus einer einheitlichen Eisensorte einzeln aus mehreren magnetisch verschiedenen paramagnetischen Schichten bestehen, so erreicht man, dass die Maxima der Wirkung nicht in allen Schichten wie bei einer einzigen Eisensorte auf einen Punkt fallen und damit eine grosse resultierende Höhe erreichen, sondern dass durch die ver schiedene Lage der Maxima diese auf eine grössere Breite verteilt werden und dadurch nie Anlass zu den ausgeprägten Spitzen, die die Stärke des Tones verursachen, werden. Praktisch wird man den Anker und auch den dazugehörigen Kern und die Joche aus Blechen von möglichst verschiedenen mag netischen Eigenschaften zusammensetzen und fest miteinander verbinden.
Rande Anker und gerne können aber auch aus ineinander gepressten, aus Eisen oder andern paramag- netischen Metallen bestehenden Röhren her gestellt werden.
Es ist aber auch möglich, für Anker, gern und Joche je ein Eisenstück mit ver schiedenen magnetischen Eigenschaften in den verschiedenen Schichten zu benutzen und diese verschiedene Schichtung durch Entkohlung oder Zementierung oder andere Eisenveräuderungsprozesse zu erzielen.
AC magnet with movable armature. With AC magnets with movable armatures, the noise in the form of a humming noise is unpleasant. It occurs due to the magnetization reversal of the armature and the resulting mechanical effects of the armature on its storage and the individual coil parts.
Attempts have been made to reduce the noise by placing the armature exactly in the center of the coil; then at least the lateral forces are lifted or by executing the armature guide with as little play as possible and then by using hydraulic pressure and riveting to bring the armature, which is made up of individual sheets of metal because of the eddy currents, together to form the most compact body possible. The noise of the coil was reduced by preventing the individual coil windings from moving against each other and against the coil flanges by firmly embedding the windings in a compound or synthetic resin.
The noiselessness aimed for in the aforementioned mechanical way is quite imperfect and must remain so, because with a movable armature there must always be play in the guidance and bearing.
If, however, according to the invention, the armature, core and yokes consist of several magnetically different paramagnetic layers instead of a single type of iron, one achieves that the maxima of the effect do not fall at one point in all layers as with a single type of iron and thus a large one Reach the resulting height, but that due to the different positions of the maxima, these are distributed over a greater width and thus never give rise to the pronounced peaks that cause the strength of the tone. In practice, the armature and also the associated core and the yokes will be assembled from sheet metal with as different magnetic properties as possible and firmly connected to one another.
Rande anchors and can also be made from tubes that are pressed into one another and made of iron or other paramagnetic metals.
But it is also possible to use a piece of iron with different magnetic properties in the different layers for anchors, like and yokes and to achieve this different layering by decarburization or cementation or other iron alderation processes.