BE888671A - PERFORMING A MOVABLE JOINT FOOT BY USING INTERNAL CENTRAL HINGED CORE AND SEMI-SOFT ELASTIC SYNTHETIC RUBBER - Google Patents

Description

       

  DESCRIPTION

PERFORMING MOVABLE JOINT FOOT BY USE

  
 <EMI ID = 1.1>

SOFT ELASTIC SYNTHETIC RUBBER.

  
0. GENERALITIES

  
 <EMI ID = 2.1>

  
hereafter a brief description of my invention * In the description, the difference between women's and men's feet and the height of the heel were abstracted. In all documents we assume an average adult

  
 <EMI ID = 3.1>

  
 <EMI ID = 4.1>

  
humane difficulties possible. because the essence of the invention is not

  
 <EMI ID = 5.1>

  
The movable articular foot aims to recreate the best possible human foot, both in form and function.

  
 <EMI ID = 6.1>

  
Mimicking the operation is covered in all other sections and is the object of the invention. for which this application is made.

  
 <EMI ID = 7.1> 2.

  
hinged central core &#65533; Which Is Integrated In A Wooden Leg Piece (A)

  
 <EMI ID = 8.1>

  
The movable articular foot should absorb and neutralize shocks and loads on the knee joint.

  
2. MATERIALS <EMI ID = 9.1>

  
to further elucidate the structure and / or function.

  
 <EMI ID = 10.1>

  
The leg (A) and the foot (I) are sawn from steamed and dried poplar wood, cut and milled to obtain a shape that best mimics the human foot shape.

  
 <EMI ID = 11.1> occur.

  
 <EMI ID = 12.1>

  
 <EMI ID = 13.1>

  
A Notch (see A) must be cut in the back of the leg piece to accommodate the tendon (G).

  
 <EMI ID = 14.1> 3.

  
2.2 Parts In synthetic rubbers

  
In order to absorb shocks and loads on the knee joint, different types of synthetic rubbers must be used,

  
 <EMI ID = 15.1>

  
state that it must be made of semi-soft elastic synthetic rubber * The cushion (D) has a thickness of + 18 mm.

  
The string (G) must be a very strong elastic (stretchable) synthetic rubber

  
 <EMI ID = 16.1>

  
to obtain flat *

  
 <EMI ID = 17.1>

  
The elastic synthetic rubbers arranged below serve as padding for mimicking the foot shape, but also have a protective

  
 <EMI ID = 18.1>

  
 <EMI ID = 19.1>

  
2, the heel piece (L) in semi-soft elastic synthetic rubber

  
3. the toe piece (M) in hard elastic synthetic rubber

  
4, the sole (N) In hard elastic synthetic rubber

  
 <EMI ID = 20.1>

  
widths that cannot be adjusted afterwards can be maintained exactly. The other dimensions are changeable and are only obtained at the RE-OPERATION stage.

  
The toe piece (M) and sole (N) parts form one monolith;

  
 <EMI ID = 21.1>

  
half these are repeated here.

  
4.

  
 <EMI ID = 22.1>

  
 <EMI ID = 23.1>

  
 <EMI ID = 24.1>

  
J. cable clamp (bottom)

  
 <EMI ID = 25.1>

  
 <EMI ID = 26.1>

  
 <EMI ID = 27.1>

  
Each of these materials has a specific function. Called special nuts
(C and K) control the tension of the cable (E), which allows the articulated foot to pivot. Ringed cable clamps (F and J), which are pressed onto the ends of the cable (E) under high pressure, ensure

  
 <EMI ID = 28.1>

  
special nuts (C and K) with their fixed pinions; The cable (E) is wound

  
 <EMI ID = 29.1>

  
Bumps the aforementioned special nuts (C and K). The number of metal fasteners is limited to:

  
 <EMI ID = 30.1>

  
5.

  
 <EMI ID = 31.1>

  
and is screwed with 3 wood spots at the top of the Notch to ensure that the tendon (G) can perform its full function over its entire surface and thus also at the end,

  
Finally, use was made of selected contact adhesives to professionally connect the parts to be glued together.

  
 <EMI ID = 32.1>

  
Enumerating and describing the materials and describing their specific function also involved the assembly of the articular foot. That is why we will not return to this in detail.

  
After the pre-processing of the wooden parts, the cushion (D) is placed on the

  
 <EMI ID = 33.1>

  
 <EMI ID = 34.1>

  
the special nuts are screwed on with fixed pinions until the desired tension of the cable (E) is obtained.

  
On the other hand, the tendon (G) must be glued and attached with the utmost care.

  
4. FINISHING

  
After all elastic synthetic rubbers have been glued, the shape of the foot is simulated as realistically as possible by cutting, sanding, grinding

  
 <EMI ID = 35.1>

  
To then also mimic the appearance of the foot and leg, become

  
 <EMI ID = 36.1>

  
6.

  
 <EMI ID = 37.1>
- walking on uneven roads
- ascending and descending stairs
- dancing and practicing sports
- go and even walk

  
Thanks to the minimal weight, almost everything is now possible.

  
 <EMI ID = 38.1>

  
Backaches are gone,

  
 <EMI ID = 39.1>

  
Other physical injuries are equalizations,

  
Many physical inconveniences are therefore definitely a thing of the past.

  
Dejection ,. depression, stress, discouragement now gives way to happiness. happiness, zest for life, courage and hope.

  
Not least, the incessant contact with doctors, specialists and surgeons has now given way to sporadic routine examinations *

  
6. DECISION

  
The movable articular foot is created by bringing it together

  
 <EMI ID = 40.1>

  
central hinged core constructed from durable maintenance-free parts. made of a strong elastic synthetic rubber to absorb tensile stress at the back of the foot and of fine soft stretch calf leather.

  
The movable articular foot aims to absorb and neutralize impacts, shocks and other loads on the knee joint. To this end, all parts of the central hinged core perform well

  
 <EMI ID = 41.1>

  

 <EMI ID = 42.1>


  

 <EMI ID = 43.1>
 

  

 <EMI ID = 44.1>
 

  

 <EMI ID = 45.1>