<Desc/Clms Page number 1>
L'objet du brevet déclaré au présent mémoire descriptif, que nous énoncerons comme "revêtement protecteur en gomme pour des carafes", représente une remarquable amélioration dans le revêtement de carafes, car au lieu d'utiliser les revêtements employés jusqu'à présent, en roseau ou en bois, ou métalliques, qui présentent de sérieux inconvénients, comme le fait de sa laborieuse confec-- tion, hauts prix - qui les font prohibitifs en bien de cas-, difficile adaptation à la surface de la carafe et difficulté de maintenir propre le revêtement, ce - nouveau type de revêtement permet, à cause de sa condition d'être fabriqué en ca- outchouc vulcanisé et grâce aux spéciales caractéristiques que nous décriverons plus bas, une adaptation parfaite au vase qu'il couvre.
De même, étant donné sa continuité extérieure, c.a.d., son manque total d'orifices, le nettoyage est ex- trêmement facile, outre un autre grand avantage, qui est la simplicité de son montage, car il suffit de coupler les deux pièces qui composent le récipient en verre et puis, par une légère pression d'une pièce sur l'autre, procéder à leur fermeture.
Pour rendre plus claire, dans le possible, la constitution de l'ob- jet qui nous occupe,nous nous référerons au plan ci-joint où on montre une ré- alisation pratique industrialisable de l'objet, bien entendu que la présente ex- position n'a pas de caractère limitatif, sinon simplement informatif, car des modifications de forme et grandeur sont toujours possibles, qui ne pourraient pas être considérées comme altération essentielle de ce que l'on déclare ici.
Sur le plan précité on peut voir les figures suivantes .
Fig. 1, vue d'ensemble en hauteur, avec coupe d'un secteur.
Fig. 2, accouplement accessoire des deux parts.
Fig. 3, détail de fond du récipient.
De l'inspection de ce plan, on déduit la constitution de l'objet qui nous occupe et qui est formé des pièces suivantes:
Pièce inférieure (1 ) construite en gomme vulcanisée en forme à peu près d'un tronc de cône, qui, à sa partie supérieure a une spèce de canal ou rainure (2) de section à peu près sémicirculaire, qui permet l'adaptation de la pièce supérieure (3) en faisant une fermeture pratiquement hermétique.
Cette pièce, à sa partie intérieure est pourvue d'une série de nervures (4) en sens radial et de la forme que l'on indique au détail de la fig. 3, qui permet la parfaite adaptation et fixation du vase en verre aux parois intérieures de la pièce précitée,
Pièce supérieure (3) construite aussi en gomme vulcanisée de la for- me appropriée au récipient à couvrir, laquelle a à sa partie supérieure un bord ou renforcement (5) qui s'adapte parfaitement au goulot du vase.
A sa partie inférieure elle porte un cerceau qui, à son tour, constitue un autre renforce- ment (6) de section égale à la rainure (2) précitée qui se trouve à la partie supérieure de la pièce inférieure, et aussi une série de nervures (4) avec le même plan d'adaptation et fixation que ceux de la pièce supérieure, au corps du récipient revêti.
La conjonction et fermeture des pièces supérieure et inférieure peut être réalisée de façon différentes, c.à.d. , elle est applicable, par exemple, sous le système représenté à la figure 2 du plan, de simple superposition de deux appuis (7)-(8) sur les bords des pièces supérieure et inférieure, respec- tivement, que l'on introduit dans un cerceau (9) métallique ou non, où l'ensemble reste parfaitement et solidement armé.
Les nervures (4) de l'intérieur des deux pièces supérieure et infé- fieure adoptent les formes les plus variées et les sections les plus diverses,car leur mission spécifique n'est que l'isolement des parois ou surfaces du réci- pient (la) de celles du revêtement pour l'amortissement des coups ; ainsidonc,
<Desc/Clms Page number 2>
elles peuvent être aussi bien de section angulaire que rectangulaires ou sémi- circulaires, etc., pouvu qu'elles aient la flexibilité nécessaire pour produire une stabilisation du récipient qu'ils sustentent, pouvant être employées d'autres matières en sustitution de la gomme vulcanisée qui soient applicables et qui ne modifient pas l'effet obtenu avec la gomme vulcanisée.
De même, ces nervures peuvent être produites en sens vertical, hori- zontal ou incliné, régulièrement ou irrégulièrement et en égalité ou avec manque d'égalité.
Comme fermeture du récipient en verre on peut appliquer une capsule en caoutchouc (11) qui emboîtera sur le goulot du récipient en verre, rabaissée à sa partie inférieure (12) de façon à s'adapter exactement au goulot du réci- pient et permettant la disposition d'une attache scellée embrassante (13) em- pêchant qu'elle se dégage, ce qui est accessoire de l'objet de ce brevet.
Ayant décrit d'une façon suffisante pour la parfaite interprétation les caractéristiques et particularités de l'objet qui a de constituer le privi- lège d'exploitation sous un caractère d'exclusivité dans le terme et conditions établis par la législation en vigueur, il ne reste à signaler que dans l'ensemble et parties des modifications de détail sont possibles pourvu que celles-ci n'al- tèrent pas son essentiellité, d'après les suivantes:
REVENDICATIONS
1. "REVETEMENT PROTECTEUR EN GOMME POUR DES CARAFES" caractérisé en ce qu'il est constitué par une pièce inférieure en caoutchouc vulcanisé en forme de tronc de cône avec une rainure à sa partie supérieure, de section sémicirculaire ou une autre convenable.
<Desc / Clms Page number 1>
The subject matter of the patent disclosed herein, which we will state as "protective rubber coating for decanters", represents a remarkable improvement in the coating of decanters, since instead of using the coatings employed heretofore, in reed or wooden, or metallic, which have serious drawbacks, such as its laborious construction, high prices - which in many cases make them prohibitive - difficult adaptation to the surface of the carafe and difficulty in maintaining Its own coating, this new type of coating allows, because of its condition of being made of vulcanized rubber and thanks to the special characteristics that we will describe below, a perfect adaptation to the vase it covers.
Likewise, given its external continuity, ie its total lack of orifices, cleaning is extremely easy, besides another great advantage, which is the simplicity of its assembly, because it suffices to couple the two parts that make up the glass container and then, by light pressure from one part to the other, close them.
To make the constitution of the object which concerns us as clear as possible, we will refer to the attached plan where we show a practical realization of the object which can be industrialized, of course that the present ex- This position has no limiting character, if not simply informative, because modifications of shape and size are always possible, which could not be considered as an essential alteration of what is declared here.
On the aforementioned plan one can see the following figures.
Fig. 1, overall view in height, with section of a sector.
Fig. 2, accessory coupling of both parts.
Fig. 3, bottom detail of the container.
From the inspection of this plan, we deduce the constitution of the object which concerns us and which is formed of the following parts:
Lower part (1) constructed of vulcanized rubber in the shape of a truncated cone, which, at its upper part has a type of channel or groove (2) of approximately semicircular section, which allows the adaptation of the upper part (3) by making a practically hermetic closure.
This part, in its inner part is provided with a series of ribs (4) in the radial direction and of the shape indicated in detail in FIG. 3, which allows the perfect adaptation and fixing of the glass vase to the interior walls of the aforementioned room,
Upper part (3) also constructed of vulcanized rubber of the shape appropriate to the container to be covered, which has at its upper part an edge or reinforcement (5) which adapts perfectly to the neck of the vase.
At its lower part it carries a hoop which, in turn, constitutes another reinforcement (6) of section equal to the aforementioned groove (2) which is located at the upper part of the lower part, and also a series of ribs (4) with the same plane of adaptation and attachment as those of the upper part, to the body of the coated container.
The conjunction and closure of the upper and lower parts can be achieved in different ways, i.e. , it is applicable, for example, under the system shown in FIG. 2 of the plan, of simple superposition of two supports (7) - (8) on the edges of the upper and lower parts, respectively, which are introduced in a hoop (9) metallic or not, where the whole remains perfectly and solidly armed.
The ribs (4) of the interior of the two upper and lower parts adopt the most varied shapes and the most diverse sections, because their specific mission is only the isolation of the walls or surfaces of the receptacle ( la) those of the coating for shock absorption; Thus,
<Desc / Clms Page number 2>
they can be of angular cross section as well as rectangular or semicircular, etc., provided that they have the flexibility necessary to produce a stabilization of the container which they support, which can be used of other materials in substitution of the vulcanized rubber which are applicable and which do not modify the effect obtained with the vulcanized gum.
Likewise, these ribs can be produced in a vertical, horizontal or inclined direction, regularly or irregularly and in equality or with lack of equality.
As a closure for the glass container, a rubber cap (11) can be applied which will fit over the neck of the glass container, lowered to its lower part (12) so as to adapt exactly to the neck of the container and allowing the provision of a sealed embracing fastener (13) preventing it from coming loose, which is ancillary to the subject of this patent.
Having described in a sufficient manner for the perfect interpretation the characteristics and peculiarities of the object which has to constitute the privilege of exploitation under a character of exclusivity in the terms and conditions established by the legislation in force, it does not It remains to be noted that in the whole and in parts modifications of detail are possible provided that these do not alter its essentiality, according to the following ones:
CLAIMS
1. "PROTECTIVE RUBBER COATING FOR CARAFES" characterized in that it is constituted by a lower part of vulcanized rubber in the shape of a truncated cone with a groove at its upper part, of semicircular section or another suitable one.