<Desc/Clms Page number 1>
Selbstsehliessendes Türschloss.
EMI1.1
<Desc/Clms Page number 2>
Wenn der Schlüssel zwecks Öffnens des Schlosses gedreht wird und gegen den Hebel 13 drückt, wirkt dieser auf den Nussarm 9, so dass letzterer die Klinke 6 anhebt und den Riegel auslöst. Wird der Nussarm 9 weiter gedreht, so verschiebt sein Vorsprung 11 den Riegel nach rückwärts in die offene Lage (Fig. 2). Beim Loslassen des Schlüssels wird der Riegel durch seine Feder nach. aussen getrieben und nimmt dabei den Nussarm 9 mit, dessen Vorsprung 11 dann längs der Schulter 4 nach oben gleitet, bis er mit dem Haken 6 in Eingriff kommt, wodurch die weitere
EMI2.1
(Fig. 3), bei welcher nur sein abgeschrägter Teil aus dem Gehäuse ragt.
Beim Zuschlagen der Türe und Hineindrücken des Riegels gelangt der Ansatz 11 ausser Eingriff mit dem Haken 5 und der Nussarm 9 wird durch seine Feder nach vorne verschwenkt, bis sein Ansatz 12 gegen den Hebel 13 stösst. Gleichzeitig wird auch der Riegel durch seine Feder in die Endschliesslage (Fig. i) gebracht.
Soll die Türe geschlossen, aber unversperrt stehen bleiben, so wird der Riegel 1 durch Drehen des Schlüssels 14 oder eines den Nussarm 9 verschwenkenden Handgriffes in die Fig. 2 gezeigte Lage zurückgezogen und, bevor der Schlüssel oder Handgriff losgelassen wird, von Hand weiter eingeschoben, bis das hakenförmige Ende 7 der Klinke 6 vor dem Ansatz 31 der Platte 2
EMI2.2
Die Ausführung des Erfindungsgegenstandes kann natürlich in mancherlei Weise verändert werden. So kann z. B. die Platte 2 weggelassen werden, wenn die Schulter 4 mit dem Haken 5 unmittelbar am Riegel angebracht ist usw.
PATENT-ANSPRÜCHE : I. Selbstschliessendes Türschloss mit Riegelfalle, welche vom Nussarm in einer beim Zuwerfen der Türe das Selbstschliessen ermöglichenden Lage gehalten wird, gekennzeichnet durch eine Klinke (6) o. dgl., welche die Riegelfalle oder einen mit ihr verbundenen Teil sowohl in der ganz herausgeschobenen (Schliess-) Lage als auch in der ganz in das Schlossgehäuse hineingeschobenen Lage (Offenlage) feststellt.
<Desc / Clms Page number 1>
Self-closing door lock.
EMI1.1
<Desc / Clms Page number 2>
When the key is turned in order to open the lock and presses against the lever 13, this acts on the nut arm 9 so that the latter lifts the pawl 6 and releases the bolt. If the nut arm 9 is rotated further, its projection 11 moves the bolt backwards into the open position (FIG. 2). When the key is released, the spring locks the bolt. driven externally and thereby takes the nut arm 9 with, the projection 11 of which then slides up along the shoulder 4 until it comes into engagement with the hook 6, whereby the other
EMI2.1
(Fig. 3), in which only its beveled part protrudes from the housing.
When the door is slammed shut and the bolt is pushed in, the projection 11 disengages from the hook 5 and the nut arm 9 is pivoted forward by its spring until its projection 12 hits the lever 13. At the same time, the bolt is brought into the final closed position by its spring (Fig. I).
If the door is to remain closed but unlocked, the bolt 1 is withdrawn into the position shown in FIG. 2 by turning the key 14 or a handle pivoting the nut arm 9 and pushed in further by hand before the key or handle is released, until the hook-shaped end 7 of the pawl 6 in front of the projection 31 of the plate 2
EMI2.2
The design of the subject matter of the invention can of course be changed in many ways. So z. B. the plate 2 can be omitted if the shoulder 4 with the hook 5 is attached directly to the bolt, etc.
PATENT CLAIMS: I. Self-closing door lock with bolt latch, which is held by the nut arm in a position that enables self-closing when the door is thrown, characterized by a latch (6) or the like, which both locks the bolt latch or a part connected to it the fully pushed out (closed) position as well as in the fully pushed into the lock housing (open position).