The official Python 2 and 3 client for Prometheus.
One: Install the client:
pip install prometheus_client
Two: Paste the following into a Python interpreter:
from prometheus_client import start_http_server, Summary
import random
import time
# Create a metric to track time spent and requests made.
REQUEST_TIME = Summary('request_processing_seconds', 'Time spent processing request')
# Decorate function with metric.
@REQUEST_TIME.time()
def process_request(t):
"""A dummy function that takes some time."""
time.sleep(t)
if __name__ == '__main__':
# Start up the server to expose the metrics.
start_http_server(8000)
# Generate some requests.
while True:
process_request(random.random())Three: Visit http://localhost:8000/ to view the metrics.
From one easy to use decorator you get:
request_processing_seconds_count: Number of times this function was called.request_processing_seconds_sum: Total amount of time spent in this function.
Prometheus's rate function allows calculation of both requests per second,
and latency over time from this data.
In addition if you're on Linux the process metrics expose CPU, memory and
other information about the process for free!
pip install prometheus_client
This package can be found on PyPI.
Four types of metric are offered: Counter, Gauge, Summary and Histogram. See the documentation on metric types and instrumentation best practices on how to use them.
Counters go up, and reset when the process restarts.
from prometheus_client import Counter
c = Counter('my_failures_total', 'Description of counter')
c.inc() # Increment by 1
c.inc(1.6) # Increment by given valueThere are utilities to count exceptions raised:
@c.count_exceptions()
def f():
pass
with c.count_exceptions():
pass
# Count only one type of exception
with c.count_exceptions(ValueError):
passGauges can go up and down.
from prometheus_client import Gauge
g = Gauge('my_inprogress_requests', 'Description of gauge')
g.inc() # Increment by 1
g.dec(10) # Decrement by given value
g.set(4.2) # Set to a given valueThere are utilities for common use cases:
g.set_to_current_time() # Set to current unixtime
# Increment when entered, decrement when exited.
@g.track_inprogress()
def f():
pass
with g.track_inprogress():
passA Gauge can also take its value from a callback:
d = Gauge('data_objects', 'Number of objects')
my_dict = {}
d.set_function(lambda: len(my_dict))Summaries track the size and number of events.
from prometheus_client import Summary
s = Summary('request_latency_seconds', 'Description of summary')
s.observe(4.7) # Observe 4.7 (seconds in this case)There are utilities for timing code:
@s.time()
def f():
pass
with s.time():
passThe Python client doesn't store or expose quantile information at this time.
Histograms track the size and number of events in buckets. This allows for aggregatable calculation of quantiles.
from prometheus_client import Histogram
h = Histogram('request_latency_seconds', 'Description of histogram')
h.observe(4.7) # Observe 4.7 (seconds in this case)The default buckets are intended to cover a typical web/rpc request from milliseconds to seconds.
They can be overridden by passing buckets keyword argument to Histogram.
There are utilities for timing code:
@h.time()
def f():
pass
with h.time():
passAll metrics can have labels, allowing grouping of related time series.
See the best practices on naming and labels.
Taking a counter as an example:
from prometheus_client import Counter
c = Counter('my_requests_total', 'HTTP Failures', ['method', 'endpoint'])
c.labels('get', '/').inc()
c.labels('post', '/submit').inc()Labels can also be passed as keyword-arguments:
from prometheus_client import Counter
c = Counter('my_requests_total', 'HTTP Failures', ['method', 'endpoint'])
c.labels(method='get', endpoint='/').inc()
c.labels(method='post', endpoint='/submit').inc()The Python client automatically exports metrics about process CPU usage, RAM,
file descriptors and start time. These all have the prefix process, and
are only currently available on Linux.
The namespace and pid constructor arguments allows for exporting metrics about other processes, for example:
ProcessCollector(namespace='mydaemon', pid=lambda: open('/var/run/daemon.pid').read())
There are several options for exporting metrics.
Metrics are usually exposed over HTTP, to be read by the Prometheus server.
The easiest way to do this is via start_http_server, which will start a HTTP
server in a daemon thread on the given port:
from prometheus_client import start_http_server
start_http_server(8000)Visit http://localhost:8000/ to view the metrics.
To add Prometheus exposition to an existing HTTP server, see the MetricsHandler class
which provides a BaseHTTPRequestHandler. It also serves as a simple example of how
to write a custom endpoint.
To use prometheus with twisted, there is MetricsResource which exposes metrics as a twisted resource.
from prometheus_client.twisted import MetricsResource
from twisted.web.server import Site
from twisted.web.resource import Resource
from twisted.internet import reactor
root = Resource()
root.putChild(b'metrics', MetricsResource())
factory = Site(root)
reactor.listenTCP(8000, factory)
reactor.run()To use Prometheus with WSGI, there is
make_wsgi_app which creates a WSGI application.
from prometheus_client import make_wsgi_app
from wsgiref.simple_server import make_server
app = make_wsgi_app()
httpd = make_server('', 8000, app)
httpd.serve_forever()Such an application can be useful when integrating Prometheus metrics with WSGI apps.
The method start_wsgi_server can be used to serve the metrics through the
WSGI reference implementation in a new thread.
from prometheus_client import start_wsgi_server
start_wsgi_server(8000)The textfile collector allows machine-level statistics to be exported out via the Node exporter.
This is useful for monitoring cronjobs, or for writing cronjobs to expose metrics about a machine system that the Node exporter does not support or would not make sense to perform at every scrape (for example, anything involving subprocesses).
from prometheus_client import CollectorRegistry, Gauge, write_to_textfile
registry = CollectorRegistry()
g = Gauge('raid_status', '1 if raid array is okay', registry=registry)
g.set(1)
write_to_textfile('/configured/textfile/path/raid.prom', registry)A separate registry is used, as the default registry may contain other metrics such as those from the Process Collector.
The Pushgateway allows ephemeral and batch jobs to expose their metrics to Prometheus.
from prometheus_client import CollectorRegistry, Gauge, push_to_gateway
registry = CollectorRegistry()
g = Gauge('job_last_success_unixtime', 'Last time a batch job successfully finished', registry=registry)
g.set_to_current_time()
push_to_gateway('localhost:9091', job='batchA', registry=registry)A separate registry is used, as the default registry may contain other metrics such as those from the Process Collector.
Pushgateway functions take a grouping key. push_to_gateway replaces metrics
with the same grouping key, pushadd_to_gateway only replaces metrics with the
same name and grouping key and delete_from_gateway deletes metrics with the
given job and grouping key. See the
Pushgateway documentation
for more information.
instance_ip_grouping_key returns a grouping key with the instance label set
to the host's IP address.
It is also possible to expose metrics to systems other than Prometheus. This allows you to take advantage of Prometheus instrumentation even if you are not quite ready to fully transition to Prometheus yet.
Metrics are pushed over TCP in the Graphite plaintext format.
from prometheus_client.bridge.graphite import GraphiteBridge
gb = GraphiteBridge(('graphite.your.org', 2003))
# Push once.
gb.push()
# Push every 10 seconds in a daemon thread.
gb.start(10.0)Sometimes it is not possible to directly instrument code, as it is not in your control. This requires you to proxy metrics from other systems.
To do so you need to create a custom collector, for example:
from prometheus_client.core import GaugeMetricFamily, CounterMetricFamily, REGISTRY
class CustomCollector(object):
def collect(self):
yield GaugeMetricFamily('my_gauge', 'Help text', value=7)
c = CounterMetricFamily('my_counter_total', 'Help text', labels=['foo'])
c.add_metric(['bar'], 1.7)
c.add_metric(['baz'], 3.8)
yield c
REGISTRY.register(CustomCollector())SummaryMetricFamily and HistogramMetricFamily work similarly.
A collector may implement a describe method which returns metrics in the same
format as collect (though you don't have to include the samples). This is
used to predetermine the names of time series a CollectorRegistry exposes and
thus to detect collisions and duplicate registrations.
Usually custom collectors do not have to implement describe. If describe is
not implemented and the CollectorRegistry was created with auto_desribe=True
(which is the case for the default registry) then collect will be called at
registration time instead of describe. If this could cause problems, either
implement a proper describe, or if that's not practical have describe
return an empty list.
Experimental: This feature is new and has rough edges.
Prometheus client libaries presume a threaded model, where metrics are shared across workers. This doesn't work so well for languages such as Python where it's common to have processes rather than threads to handle large workloads.
To handle this the client library can be put in multiprocess mode. This comes with a number of limitations:
- Registries can not be used as normal, all instantiated metrics are exported
- Custom collectors do not work (e.g. cpu and memory metrics)
- The pushgateway cannot be used
- Gauges cannot use the
pidlabel - Gunicron's
preload_appfeature is not supported
There's several steps to getting this working:
One: Gunicorn deployment
The prometheus_multiproc_dir environment variable must be set to a directory
that the client library can use for metrics. This directory must be wiped
between Gunicorn runs (before startup is recommended).
Put the following in the config file:
def worker_exit(server, worker):
from prometheus_client import multiprocess
multiprocess.mark_process_dead(worker.pid)Two: Inside the application
from prometheus_client import multiprocess
from prometheus_client import generate_latest, CollectorRegistry, CONTENT_TYPE_LATEST, Gauge
# Example gauge.
IN_PROGRESS = Gauge("inprogress_requests", "help", multiprocess_mode='livesum')
# Expose metrics.
@IN_PROGRESS.track_inprogress()
def app(environ, start_response):
registry = CollectorRegistry()
multiprocess.MultiProcessCollector(registry)
data = generate_latest(registry)
status = '200 OK'
response_headers = [
('Content-type', CONTENT_TYPE_LATEST),
('Content-Length', str(len(data)))
]
start_response(status, response_headers)
return iter([data])Three: Instrumentation
Counters, Summarys and Histograms work as normal.
Gauges have several modes they can run in, which can be selected with the
multiprocess_mode parameter.
- 'all': Default. Return a timeseries per process alive or dead.
- 'liveall': Return a timeseries per process that is still alive.
- 'livesum': Return a single timeseries that is the sum of the values of alive processes.
- 'max': Return a single timeseries that is the maximum of the values of all processes, alive or dead.
- 'min': Return a single timeseries that is the minimum of the values of all processes, alive or dead.
The Python client supports parsing the Promeheus text format. This is intended for advanced use cases where you have servers exposing Prometheus metrics and need to get them into some other system.
from prometheus_client.parser import text_string_to_metric_families
for family in text_string_to_metric_families("my_gauge 1.0\n"):
for sample in family.samples:
print("Name: {0} Labels: {1} Value: {2}".format(*sample))