hardbyte · felixdivo · May 9, 2017 · May 9, 2017 · May 9, 2017 · May 9, 2017
diff --git a/can/interface.py b/can/interface.py
@@ -21,7 +21,8 @@
     'virtual':          ('can.interfaces.virtual', 'VirtualBus'),
     'neovi':            ('can.interfaces.ics_neovi', 'NeoViBus'),
     'vector':           ('can.interfaces.vector', 'VectorBus'),
-    'slcan':            ('can.interfaces.slcan', 'slcanBus')
+    'slcan':            ('can.interfaces.slcan', 'slcanBus'),
+    'canal':            ('can.interfaces.canal', 'CanalBus'),
 }
 
 

diff --git a/can/interfaces/__init__.py b/can/interfaces/__init__.py
@@ -1,14 +1,15 @@
 # -*- coding: utf-8 -*-
+
 """
 Interfaces contain low level implementations that interact with CAN hardware.
 """
+
 from pkg_resources import iter_entry_points
 
 VALID_INTERFACES = set(['kvaser', 'serial', 'pcan', 'socketcan_native',
                         'socketcan_ctypes', 'socketcan', 'usb2can', 'ixxat',
                         'nican', 'iscan', 'vector', 'virtual', 'neovi',
-                        'slcan'])
-
+                        'slcan', 'canal'])
 
 VALID_INTERFACES.update(set([
     interface.name for interface in iter_entry_points('python_can.interface')

diff --git a/can/interfaces/canal/__init__.py b/can/interfaces/canal/__init__.py
@@ -0,0 +1,2 @@
+from can.interfaces.canal.canalInterface import CanalBus
+from can.interfaces.canal.canal_wrapper import CanalWrapper
diff --git a/can/interfaces/canal/canalInterface.py b/can/interfaces/canal/canalInterface.py
@@ -0,0 +1,196 @@
+# this interface is for windows only, otherwise use socketCAN
+
+import logging
+
+from can import BusABC, Message
+from can.interfaces.canal.canal_wrapper import *
+
+bootTimeEpoch = 0
+try:
+    import uptime
+    import datetime
+
+    bootTimeEpoch = (uptime.boottime() - datetime.datetime.utcfromtimestamp(0)).total_seconds()
+except:
+    bootTimeEpoch = 0
+
+# Set up logging
+log = logging.getLogger('can.canal')
+
+
+def format_connection_string(deviceID, baudrate='500'):
+    """setup the string for the device
+
+    config = deviceID + '; ' + baudrate
+    """
+    return "%s; %s" % (deviceID, baudrate)
+
+
+def message_convert_tx(msg):
+    messagetx = CanalMsg()
+
+    length = len(msg.data)
+    messagetx.sizeData = length
+
+    messagetx.id = msg.arbitration_id
+
+    for i in range(length):
+        messagetx.data[i] = msg.data[i]
+
+    messagetx.flags = 0x80000000
+
+    if msg.is_error_frame:
+        messagetx.flags |= IS_ERROR_FRAME
+
+    if msg.is_remote_frame:
+        messagetx.flags |= IS_REMOTE_FRAME
+
+    if msg.id_type:
+        messagetx.flags |= IS_ID_TYPE
+
+    return messagetx
+
+
+def message_convert_rx(messagerx):
+    """convert the message from the CANAL type to pythoncan type"""
+    ID_TYPE = bool(messagerx.flags & IS_ID_TYPE)
+    REMOTE_FRAME = bool(messagerx.flags & IS_REMOTE_FRAME)
+    ERROR_FRAME = bool(messagerx.flags & IS_ERROR_FRAME)
+
+    msgrx = Message(timestamp=messagerx.timestamp / 1000.0,
+                    is_remote_frame=REMOTE_FRAME,
+                    extended_id=ID_TYPE,
+                    is_error_frame=ERROR_FRAME,
+                    arbitration_id=messagerx.id,
+                    dlc=messagerx.si
8000
zeData,
+                    data=messagerx.data[:messagerx.sizeData]
+                    )
+
+    return msgrx
+
+
+class CanalBus(BusABC):
+    """Interface to a CANAL Bus.
+
+    Note the interface doesn't implement set_filters, or flush_tx_buffer methods.
+
+    :param str channel:
+        The device's serial number. If not provided, Windows Management Instrumentation
+        will be used to identify the first such device. The *kwarg* `serial` may also be
+        used.
+
+    :param str dll:
+        dll with CANAL API to load
+
+    :param int bitrate:
+        Bitrate of channel in bit/s. Values will be limited to a maximum of 1000 Kb/s.
+        Default is 500 Kbs
+
+    :param str serial (optional)
+        device serial to use for the CANAL open call
+
+    :param str serialMatcher (optional)
+        search string for automatic detection of the device serial
+
+    :param int flags:
+        Flags to directly pass to open function of the CANAL abstraction layer.
+    """
+
+    def __init__(self, channel, *args, **kwargs):
+
+        # TODO force specifying dll
+        if 'dll' in kwargs:
+            dll = kwargs["dll"]
+        else:
+            raise Exception("please specify a CANAL dll to load, e.g. 'usb2can.dll'")
+
+        self.can = CanalWrapper(dll)
+
+        # set flags on the connection
+        if 'flags' in kwargs:
+            enable_flags = kwargs["flags"]
+
+        else:
+            enable_flags = 0x00000008
+
+        # code to get the serial number of the device
+        if 'serial' in kwargs:
+            deviceID = kwargs["serial"]
+        elif channel is not None:
+            deviceID = channel
+        else:
+            # autodetect device
+            from can.interfaces.canal.serial_selector import serial
+            if 'serialMatcher' in kwargs:
+                deviceID = serial(kwargs["serialMatcher"])
+            else:
+                deviceID = serial()
+
+            if not deviceID:
+                raise can.CanError("Device ID could not be autodetected")
+
+        self.channel_info = "CANAL device " + deviceID
+
+        # set baudrate in kb/s from bitrate
+        # (eg:500000 bitrate must be 500)
+        if 'bitrate' in kwargs:
+            br = kwargs["bitrate"]
+
+            # max rate is 1000 kbps
+            baudrate = max(1000, int(br/1000))
+        # set default value
+        else:
+            baudrate = 500
+
+        connector = format_connection_string(deviceID, baudrate)
+
+        self.handle = self.can.open(connector, enable_flags)
+        # print "ostemad"
+
+
+    def send(self, msg, timeout=None):
+        tx = message_convert_tx(msg)
+
+        if timeout:
+            status = self.can.blocking_send(self.handle, byref(tx), int(timeout * 1000))
+        else:
+            status = self.can.send(self.handle, byref(tx))
+
+        if status != 0:
+            raise can.CanError("could not send message: status == {}".format(status))
+
+    def recv(self, timeout=None):
+
+        messagerx = CanalMsg()
+
+        if timeout == 0:
+            status = self.can.receive(self.handle, byref(messagerx))
+
+        else:
+            time = 0 if timeout is None else int(timeout * 1000)
+            status = self.can.blocking_receive(self.handle, byref(messagerx), time)
+
+        if status == 0:
+            # success
+            return message_convert_rx(messagerx)
+
+        elif status == 19:
+            # CANAL_ERROR_RCV_EMPTY
+            log.warn("recv: status: CANAL_ERROR_RCV_EMPTY")
+            return None
+
+        elif status == 32:
+            # CANAL_ERROR_TIMEOUT
+            log.warn("recv: status: CANAL_ERROR_TIMEOUT")
+            return None
+
+        else:
+            # another error
+            raise can.CanError("could not receive message: status == {}".format(status))
+
+    def shutdown(self):
+        """Shut down the device safely"""
+        status = self.can.close(self.handle)
+
+        if status != 0:
+            raise can.CanError("could not shut down bus: status == {}".format(status))
diff --git a/can/interfaces/canal/canal_wrapper.py b/can/interfaces/canal/canal_wrapper.py
@@ -0,0 +1,151 @@
+# This wrapper is for windows or direct access via CANAL API. Socket CAN is recommended under Unix/Linux systems
+import can
+from ctypes import *
+from struct import *
+import logging
+
+log = logging.getLogger('can.canal')
+
+# type definitions
+flags = c_ulong
+pConfigureStr = c_char_p
+handle = c_long
+timeout = c_ulong
+filter = c_ulong
+
+# flags mappings
+IS_ERROR_FRAME = 4
+IS_REMOTE_FRAME = 2
+IS_ID_TYPE = 1
+
+
+class CanalStatistics(Structure):
+    _fields_ = [('ReceiveFrams', c_ulong),
+                ('TransmistFrams', c_ulong),
+                ('ReceiveData', c_ulong),
+                ('TransmitData', c_ulong),
+                ('Overruns', c_ulong),
+                ('BusWarnings', c_ulong),
+                ('BusOff', c_ulong)]
+
+
+stat = CanalStatistics
+
+
+class CanalStatus(Structure):
+    _fields_ = [('channel_status', c_ulong),
+                ('lasterrorcode', c_ulong),
+                ('lasterrorsubcode', c_ulong),
+                ('lasterrorstr', c_byte * 80)]
+
+
+# data type for the CAN Message
+class CanalMsg(Structure):
+    _fields_ = [('flags', c_ulong),
+                ('obid', c_ulong),
+                ('id', c_ulong),
+                ('sizeData', c_ubyte),
+                ('data', c_ubyte * 8),
+                ('timestamp', c_ulong)]
+
+
+class CanalWrapper:
+    """A low level wrapper around the CANAL library.
+    """
+    def __init__(self, dll):
+        self.__m_dllBasic = windll.LoadLibrary(dll)
+
+        if self.__m_dllBasic is None:
+            log.warning('DLL failed to load')
+
+    def open(self, pConfigureStr, flags):
+        try:
+            # unicode is not good
+            pConfigureStr = pConfigureStr.encode('ascii', 'ignore')
+            res = self.__m_dllBasic.CanalOpen(pConfigureStr, flags)
+            if res == 0:
+                raise can.CanError("CanalOpen failed, configure string: " + pConfigureStr)
+            return res
+        except:
+            log.warning('Failed to open')
+            raise
+
+    def close(self, handle):
+        try:
+            res = self.__m_dllBasic.CanalClose(handle)
+            return res
+        except:
+            log.warning('Failed to close')
+            raise
+
+    def send(self, handle, msg):
+        try:
+            res = self.__m_dllBasic.CanalSend(handle, msg)
+            return res
+        except:
+            log.warning('Sending error')
+            raise can.CanError("Failed to transmit frame")
+
+    def receive(self, handle, msg):
+        try:
+            res = self.__m_dllBasic.CanalReceive(handle, msg)
+            return res
+        except:
+            log.warning('Receive error')
+            raise
+
+    def blocking_send(self, handle, msg, timeout):
+        try:
+            res = self.__m_dllBasic.CanalBlockingSend(handle, msg, timeout)
+            return res
+        except:
+            log.warning('Blocking send error')
+            raise
+
+    def blocking_receive(self, handle, msg, timeout):
+        try:
+            res = self.__m_dllBasic.CanalBlockingReceive(handle, msg, timeout)
+            return res
+        except:
+            log.warning('Blocking Receive Failed')
+            raise
+
+    def get_status(self, handle, CanalStatus):
+        try:
+            res = self.__m_dllBasic.CanalGetStatus(handle, CanalStatus)
+            return res
+        except:
+            log.warning('Get status failed')
+            raise
+
+    def get_statistics(self, handle, CanalStatistics):
+        try:
+            res = self.__m_dllBasic.CanalGetStatistics(handle, CanalStatistics)
+            return res
+        except:
+            log.warning('Get Statistics failed')
+            raise
+
+    def get_version(self):
+        try:
+            res = self.__m_dllBasic.CanalGetVersion()
+            return res
+        except:
+            log.warning('Failed to get version info')
+            raise
+
+    def get_library_version(self):
+        try:
+            res = self.__m_dllBasic.CanalGetDllVersion()
+            return res
+        except:
+            log.warning('Failed to get DLL version')
+            raise
+
+    def get_vendor_string(self):
+        try:
+            res = self.__m_dllBasic.CanalGetVendorString()
+            return res
+        except:
+            log.warning('Failed to get vendor string')
+            raise
Original file line number	Diff line number	Diff line change
		@@ -0,0 +1,2 @@
		from can.interfaces.canal.canalInterface import CanalBus
		from can.interfaces.canal.canal_wrapper import CanalWrapper