8000 GitHub - ezracb/python-opencv-gstreamer-examples: Python examples on how to use GStreamer within OpenCV. Now with GPU support! :fire::fire::fire:
[go: up one dir, main page]
Skip to content

ezracb/python-opencv-gstreamer-examples

BranchesTags
 
 

Repository files navigation

Python3 examples for the usage of GStreamer in OpenCV

I give you the light of Eärendil GStreamer, our most beloved star lib. May it be a light for you in dark places, when all other lights go out.

Short intro

These examples, written in Python, will provide a good starting point for a lot, and the most common, applications of GStreamer and OpenCV. The snippets mainly use OpenCV's VideoWriter and VideoCapture object, and include the following functionalities:

  • Grabbing of standard OpenCV videocapture device
import cv2

# Cam properties
fps = 30.
frame_width = 1920
frame_height = 1080
# Create capture
cap = cv2.VideoCapture(0)
# Set camera properties
cap.set(cv2.CAP_PROP_FRAME_WIDTH, frame_width)
cap.set(cv2.CAP_PROP_FRAME_HEIGHT, frame_height)
cap.set(cv2.CAP_PROP_FPS, fps)
  • Grabbing of v4l2src videocapture device via GStreamer
# The following string usually works on most webcams
webcam2appsink_YUY2_640_480 = "v4l2src device=/dev/video0 ! video/x-raw, format=YUY2, width=640, height=480, pixel-aspect-ratio=1/1, framerate=30/1 ! videoconvert ! appsink"
  • Writing of OpenCV frames to shared memory
gst_str = "appsrc ! videoconvert ! shmsink socket-path=/tmp/foo sync=true wait-for-connection=false shm-size=10000000"
  • Grabbing of shared memory sources
cap = cv2.VideoCapture("shmsrc socket-path=/tmp/foo ! video/x-raw, format=BGR, width=640, height=480, pixel-aspect-ratio=1/1, framerate=30/1 ! decodebin ! videoconvert ! appsink")
  • Writing of OpenCV frames to shared memory, file and RTP
gst_str_rtp = "appsrc ! videoconvert ! x264enc noise-reduction=10000 tune=zerolatency byte-stream=true threads=4 " \
             " ! h264parse ! mpegtsmux ! rtpmp2tpay ! udpsink host=127.0.0.1 port=5000"
  • Usage of hardware acceleration features for encoding and decoding
# mfxh264enc does all the HW encoding on the INTEL HD GPU
appsink2file = "appsrc ! videoconvert ! mfxh264enc ! \
       video/x-h264, profile=baseline ! \
       matroskamux ! filesink location=the_gstreamer_enjoyer.mkv"
  • Portable to CLI usage

Since you are here, you probably know why you want to use GStreamer and OpenCV and I'm not gonna list all the advantages that GStreamer brings to the table. However, if you find this repo helpful or even remotely funny, consider leaving a star. Or not. Your choice.

News

  • 2021-03-30 Updated README; further install instructions; Raspi HW enc pipeline examples incoming
  • 2021-03-23 Updated README; preparation for nvidia examples
  • 2021-03-01 Updated for usage with Intel HD GPUs. NVIDIA examples as well as more complex stuff like splitting coming soon

Prerequisites

  • Be a unix enthusiast. The GPU encoding pipelines in GStreamer are extremly powerful, but are hard to install.

  • Ubuntu 20.04

  • Correct drivers for GPU (CUDA + CUDNN if necessary)

  • Install GStreamer

    sudo apt-get install gstreamer1.0* libgstreamer-plugins-bad1.0-0 libgstreamer-plugins-base1.0-0 libgstreamer-plugins-base1.0-dev libgstreamer1.0 libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev libgtk-3-dev

  • optional FFMPEG, QT (+ OpenGL)

Prerequisites for HW accelerated encoding/decoding

  • Intel-CPUs

    • Supported platforms: Intel Haswell / Broadwell / Skylake with Intel HD / Iris Pro graphics / Apollo Lake) (>= Gen4)

    • Noticable features:

      • HW H264/H265 encoding and decoding
      • Bitrate control (CBR, VBR, CQP).
      • Selectable profiles up to High Profile.

    • Installation process (Honestly this is pretty frustrating Intel. I got very mad followed by getting drunk and yelling at the PC, but as far as i remember the process went something like this):

    • Further instructions are here, here

    • Detailed examples here

    • Achieved speedup for writing a Full-HD frame (1920x1080px) to NVMe SSD:

      • x264enc (Software encoding): 25 ms
      • mfxh264enc (Hardware encoding): 1 ms

  • NVIDIA GPUs

    • Supported platforms: CUDA enabled NVIDIA GPU (List of CUDA GPUs) (tested on GTX1070, GTX1080Ti and RTX 2070)
    • Noticable features:
      • HW H264/H265 encoding and decoding
      • Bitrate control (CBR, VBR, CQP)
    • Installation process (not so tedious, but still):
    • Get your correct drivers, CUDA and preferably CUDNN (Link)
    • Follow this guide (mind here to checkout the correct branch for your GStreamer version, for me it was 1.16.2 instead of 1.14.0) and read the comments.
    • If you're having problems finding the plugins, check the installation paths of GStreamer plugins. It may be found in /usr/lib/x86_64-linux-gnu/gstreamer-1.0/, or in /usr/local/lib/gstreamer-1.0/ or even in your local path if you don't have sudo. Truth is that i copipasta'd the files until it matched. There might be a more elegant way to do this.

  • AMD GPUs

    • get a NVIDIA GPU (or feel free to contribute method)
    • not sponsored by NVIDIA, but by them

Building OpenCV

  • Build & install OpenCV 4.x (4.2 works good for me; ROS works with it)
    • Mind here that we need to change a lot of CMake flags, so I highly recommend cmake-gui (sudo apt-get install cmake-qt-gui); search and click the features you want to have enabled (even after your exec'd a usual cmake -D flag)
    • Guide for building with CUDA support on Ubuntu 20.04 (18.04 here)
    • Mind that CUDA requires opencv-contrib modules (do not forget to check out the correct version here as well)
    • enable deprecated OPENCV_GENERATE_PKGCONFIG files. Idk why OpenCV thinks they aren't needed anymore.
    • or enable gstreamer 1.0 support with -D WITH_GSTREAMER=ON

Tests

  • Test if GStreamer installation was successful (You should see your webcam's image):
 $ gst-launch-1.0 v4l2src ! xvimagesink
  • Test if Intel MFX installation was successful:
$ gst-inspect-1.0 | grep mfx 
mfx: mfxh264dec: MFX H264 decoder
mfx: mfxhevcdec: MFX HEVC decoder
mfx: mfxh264enc: MFX H.264 encoder
mfx: mfxhevcenc: MFX H.265 encoder
  • Test if NVIDIA NVENC installation was successful:
$ gst-inspect-1.0 | grep nvenc 
nvenc: nvh264enc: NVENC H.264 Video Encoder

Usage

  • gst_device_to_shm grabs the VideoCapture(0) and puts the raw image in a shared memory. Mind here to define your own webcam properties.
  • gst_shm_to_app grabs the shared memory frame from gst_device_to_shm and pipes it to a VideoCapture.
  • gst_device_to_rtp grabs the VideoCapture(0),encodes the frame and streams it to rtp://localhost:5000
  • gst_shm_to_rtp grabs the shared memory frame from gst_device_to_shm ,encodes the frame and streams it to rtp://localhost:5000.
  • gst_intel_device_to_app_to_file grabs the v4l2src /dev/video0 (usually webcam) to OpenCV format and writes it as an h264 encoded file.
  • gst_intel_device_to_app_to_rtp grabs the v4l2src /dev/video0 (usually webcam) to OpenCV format and writes it as an h264 encoded rtp stream. Use the provided *.sdp files for VLC viewer.
  • gst_shm_to_rtp grabs the shared memory frame from gst_device_to_shm ,encodes the frame and streams it to rtp://localhost:5000.
  • [gst_nvidia_device_to_app_to_file] (coming_soon™)
  • [gst_nvidia_device_to_app_to_rtp] (coming_soon™)
  • [gst_raspberrypi_device_to_app_to_file] (coming_soon™)

Further informations

Inspired by https://github.com/tik0/mat2gstreamer

Disclaimer

  • Use at your own risk
  • It works on my machine

About

Python examples on how to use GStreamer within OpenCV. Now with GPU support! 🔥🔥🔥

Resources

Readme
Activity

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%
0