The following tutorial showcases a Dockerized Apache Spark application running in a Mesos cluster. In the example the Spark Driver, as well as the Spark Executors, will be running in a Docker Image based on Ubuntu with the additions of the SciPy Python packages. If you are already familiar with the reasons of using Docker as well as Apache Mesos feel free to skip the next section and jump right into the tutorial, if not, please carry on.
Today is pretty common to find Engineers and Data Scientist that need to run Big Data workloads inside a shared infrastructure. In addition the infrastructure could potentially be used not only for such workloads but to for other important services required for business operations. All these amalgamates to a none trivial infrastructure and provisioning conundrum.
A very common way to solve such problem is to virtualize the infrastructure and statically partition it such that each development or business group in the company has its own resources to deploy and run their applications on. Hopefully the maintainers of such infrastructure and services have a DevOps mentality and have automated, and continuously work on automating, the configuration and software provisioning tasks on such infrastructure. The problem is, as Benhamin Hindman backed by studies done at the University of California at Berkeley points out, static partitioning can be highly inefficient on the utilization of such infrastructure. This has prompted the development of Resource Schedulers that abstracts CPU, memory, storage, and other compute resources away from machines, either physical or virtual, to enable the execution of applications across the infrastructure to achieve a higher utilization factor, among other things.
The concept of sharing infrastructure resources is not new for applications that entail the analysis of large datasets, in most cases through algorithms that favor parallelization of workloads. Today the most common frameworks to develop such applications are Hadoop Map Reduce and Apache Spark. In the case of Apache Spark it can be deployed in clusters managed by Resource Schedulers such as Hadoop YARN or Apache Mesos. Now, since different applications are running inside a shared infrastructure its common to find applications that have different sets of requirements across the software packages and versions of such packages they depend on to function. As an operation engineer, or infrastructure manager, you could force your users to a predefine set of software libraries, along with their versions, that the infrastructure supports. Hopefully if you follow that path you also establish a procedure to upgrade such software libraries and add new ones. This tends to require an investment in time and might be frustrating to Engineers and Data Scientist that are constantly installing new packages and libraries to facilitate their work. When you decide to upgrade you might as well have to refactor some applications that might have been running for a long time but have hard dependencies on previous versions of the packages that are part of the upgraded. All in all, its not simple.
Linux Containers, and specially Docke 6880 r, offer an abstraction such that software can be packaged into light weight images that can be executed as containers. The containers are executed with some level of isolation, such isolation is mainly provided by cgroups. Each image can define the type of operating system that it requires along with the software packages. This provides a fantastic mechanism to pass the burden of maintaining the software packages and libraries out of infrastructure management and operations to the owners of the applications. With this the infrastructure and operation teams can run multiple, isolated, applications that can potentially have conflicting software libraries within the same infrastructure. Apache Spark can leverage this as long as its deployed with an Apache Mesos cluster that supports Docker.
In the next sections we will review how we can run Apache Spark Applications within Docker containers.
For this tutorial we will use a CentOS 7.2 minimal image running on VirtualBox. We will not include as part of this tutorial the instructions on obtaining such CentOS Image and making it available in VirtualBox nor configuring its network interfaces.
In addition to the above we will be using a single node to keep this exercise as simple as possible. We can later explore deploying a similar setup in a set of nodes in the cloud but for the sake of simplicity and time our single node will be running the following services:
- A Mesos Master
- A Mesos Slave
- A Zookeeper Instance
- A Docker Daemon
To install Apache Mesos in your cluster I suggest you follow the Mesosphere getting started guidelines. Since we are using CentOS 7.2 we first installed the Mesosphere YUM Repository as follows:
# Add the repository
sudo rpm -Uvh http://repos.mesosphere.com/el/7/noarch/RPMS/mesosphere-el-repo-7-1.noarch.rpm
We then install Apache Mesos and the Apache Zookeeper packages.
sudo yum -y install mesos mesosphere-zookeeper
Once the packages are installed we need to configure Zookeeper as well as the Mesos Master and Slave.
For Zookeeper we need to create a Zookeeper Node Identity, we do this my setting the numerical identifying inside
the /var/lib/zookeeper/myid file.
echo "1" > /var/lib/zookeeper/myid
Since by default Zookeeper binds to all interfaces and exposes its services through port 2181 we do not need to
change the /etc/zookeeper/conf/zoo.cfg file. Please refer to the Mesosphere getting started guidelines
if you have a Zookeeper ensemble, more than one node running Zookeeper. After that we can start the Zookeeper Service.
sudo service zookeeper restart
Before we start to describe the Mesos configuration we most note that the location of the Mesos configuration files that we are going to mention bellow is specific to Mesosphere's Mesos package. If you don't have a strong reason to build your own Mesos packages I suggest you use the ones that Mesosphere kindly provides. Lets continue.
We need to tell the Mesos Master and Slave the connection string the they can use to reach Zookeeper, including their namespace.
By default Zookeeper will bind to all interfaces, you might want to change this behaviour.
In our case we will make sure that the IP address that we want to use to connect to Zookeeper can be resolved within the
containers. The nodes public interface IP 192.168.99.100, to do this we do the following:
echo "zk://192.168.99.100:2181/mesos" > /etc/mesos/zk
Now since in our setup we have several network interfaces associated with the node that will be running the Mesos Master we will
pick an interface that will be reachable within the Docker containers that will eventually be running the Spark Driver and Spark Executors.
Knowing that the IP address that we want to bind to is 192.168.99.100 we do the following:
echo "192.168.99.100" > /etc/mesos-master/ip
We do a similar thing for the Mesos Slave, again, please consider that in our example the Mesos Slave is running in the same node as the Mesos Master and we are going to bind it to the same network interface.
echo "192.168.99.100" > /etc/mesos-slave/ip
echo "192.168.99.100" > /etc/mesos-slave/hostname
The ip defines the IP address that the Mesos Slave is going to bind to and hostname defines the hostname that the slave will use to report
its availability and therefore is the value that the Mesos Frameworks, in our case Apache Spark, will use to connect to it.
Lets start the services
systemctl start mesos-master
systemctl start mesos-slave
By default the Mesos Master will bind to port 5050 and the Mesos Slave to port 5051. Lets confirm, assuming you have installed the net-utils package.
netstat -pleno | grep -E "5050|5051"
tcp 0 0 192.168.99.100:5050 0.0.0.0:* LISTEN 0 127336 22205/mesos-master off (0.00/0/0)
tcp 0 0 192.168.99.100:5051 0.0.0.0:* LISTEN 0 127453 22242/mesos-slave off (0.00/0/0)
Lets run a test.
MASTER=$(mesos-resolve `cat /etc/mesos/zk`) \
LIBPROCESS_IP=192.168.99.100 \
mesos-execute --master=$MASTER \
--name="cluster-test" \
--command="echo 'Hello World' && sleep 5 && echo 'Good Bye'"
We followed the Docker documentation on installing Docker in CentOS. I suggest you do the same. In a nutshell we executed the following.
sudo yum update
sudo tee /etc/yum.repos.d/docker.repo <<-'EOF'
[dockerrepo]
name=Docker Repository
baseurl=https://yum.dockerproject.org/repo/main/centos/$releasever/
enabled=1
gpgcheck=1
gpgkey=https://yum.dockerproject.org/gpg
EOF
sudo yum install docker-engine
sudo service docker start
If the above succeeded you should be able to do a docker ps as well as a docker search ipython/scipystack successfully.
Lets create the Dockerfile that will be used by the Spark Driver and Spark Executor. For our example we will consider that the Docker Image should provide the SciPy Stack along with additional Python libraries. So, in a nutshell, the Docker Image most have the following features:
- The version of libmesos should be compatible with the version of the Mesos Master and Slave. e.g.
/usr/lib/libmesos-0.26.0.so - Should have a valid JDK.
- Should have the SciPy Stack as well as Python packages that we want.
- Have a version of Spark, we will choose 1.6.0
The Dockerfile bellow will provide the requirements that we mention above. Note that installing Mesos
through the Mesosphere RPMs will install Open JDK, in this case 1.7.
Dockerfile:
# Version 0.1
FROM ipython/scipystack
MAINTAINER Bernardo Gomez Palacio "bernardo.gomezpalacio@gmail.com"
ENV REFRESHED_AT 2015-03-19
ENV DEBIAN_FRONTEND noninteractive
RUN apt-get update
RUN apt-get dist-upgrade -y
# Setup
RUN sudo apt-key adv --keyserver keyserver.ubuntu.com --recv E56151BF
RUN export OS_DISTRO=$(lsb_release -is | tr '[:upper:]' '[:lower:]') && \
export OS_CODENAME=$(lsb_release -cs) && \
echo "deb http://repos.mesosphere.io/${OS_DISTRO} ${OS_CODENAME} main" | \
tee /etc/apt/sources.list.d/mesosphere.list &&\
apt-get -y update
RUN apt-get -y install mesos
RUN apt-get install -y python libnss3 curl
RUN curl http://d3kbcqa49mib13.cloudfront.net/spark-1.6.0-bin-hadoop2.6.tgz \
| tar -xzC /opt && \
mv /opt/spark* /opt/spark
RUN apt-get clean
# Fix pypspark six error.
RUN pip2 install -U six
RUN pip2 install msgpack-python
RUN pip2 install avro
COPY spark-conf/* /opt/spark/conf/
COPY scripts /scripts
ENV SPARK_HOME /opt/spark
ENTRYPOINT ["/scripts/run.sh"]
Lets explain some very important files that will be available in the Docker Image according to the Dockerfile mentioned above:
The spark-conf/spark-env.sh, as mentioned in the Spark docs, will be used to set the
location of the Mesos libmesos.so.
export MESOS_NATIVE_JAVA_LIBRARY=${MESOS_NATIVE_JAVA_LIBRARY:-/usr/lib/libmesos.so}
export SPARK_LOCAL_IP=${SPARK_LOCAL_IP:-"127.0.0.1"}
export SPARK_PUBLIC_DNS=${SPARK_PUBLIC_DNS:-"127.0.0.1"}
The spark-conf/spark-defaults.conf is serves as the definition of the default configuration for our
Spark Jobs within the container, the contents are bellow.
spark.master SPARK_MASTER
spark.mesos.mesosExecutor.cores MESOS_EXECUTOR_CORE
spark.mesos.executor.docker.image SPARK_IMAGE
spark.mesos.executor.home /opt/spark
spark.driver.host CURRENT_IP
spark.executor.extraClassPath /opt/spark/custom/lib/*
spark.driver.extraClassPath /opt/spark/custom/lib/*
Note the use of environment variables such as SPARK_MASTER and SPARK_IMAGE are critical since
this will allow us to customize how the Spark Application interacts with Mesos Docker integration.
We have Docker's entry point script. The script, showcased bellow,
will populate the spark-defaults.conf file.
Now lets define the Dockerfile Entrypoint such that it lets us define some basic options that
will get passed to the Spark command, for example spark-shell, spark-submit or pyspark.
#!/bin/bash
SPARK_MASTER=${SPARK_MASTER:-local}
MESOS_EXECUTOR_CORE=${MESOS_EXECUTOR_CORE:-0.1}
SPARK_IMAGE=${SPARK_IMAGE:-sparkmesos:lastet}
CURRENT_IP=$(hostname -i)
sed -i 's;SPARK_MASTER;'$SPARK_MASTER';g' /opt/spark/conf/spark-defaults.conf
sed -i 's;MESOS_EXECUTOR_CORE;'$MESOS_EXECUTOR_CORE';g' /opt/spark/conf/spark-defaults.conf
sed -i 's;SPARK_IMAGE;'$SPARK_IMAGE';g' /opt/spark/conf/spark-defaults.conf
sed -i 's;CURRENT_IP;'$CURRENT_IP';g' /opt/spark/conf/spark-defaults.conf
export SPARK_LOCAL_IP=${SPARK_LOCAL_IP:-${CURRENT_IP:-"127.0.0.1"}}
export SPARK_PUBLIC_DNS=${SPARK_PUBLIC_DNS:-${CURRENT_IP:-"127.0.0.1"}}
if [ $ADDITIONAL_VOLUMES ];
then
echo "spark.mesos.executor.docker.volumes: $ADDITIONAL_VOLUMES" >> /opt/spark/conf/spark-defaults.conf
fi
exec "$@"
Lets build the image so we can start using it.
docker build -t sparkmesos . && \
docker tag -f sparkmesos:latest sparkmesos:latest
Now that the image is built we just need to run it. We will call the PySpark application.
docker run -it --rm \
-e SPARK_MASTER="mesos://zk://192.168.99.100:2181/mesos" \
-e SPARK_IMAGE="sparkmesos:latest" \
-e PYSPARK_DRIVER_PYTHON=ipython2 \
sparkmesos:latest /opt/spark/bin/pyspark
To make sure that SciPy is working lets write the following to the PySpark shell
from scipy import special, optimize
import numpy as np
f = lambda x: -special.jv(3, x)
sol = optimize.minimize(f, 1.0)
x = np.linspace(0, 10, 5000)
x
Now, lets try to calculate PI as an example .
docker run -it --rm \
-e SPARK_MASTER="mesos://
7813
zk://192.168.99.100:2181/mesos" \
-e SPARK_IMAGE="sparkmesos:latest" \
-e PYSPARK_DRIVER_PYTHON=ipython2 \
sparkmesos:latest /opt/spark/bin/spark-submit --driver-memory 500M \
--executor-memory 500M \
/opt/spark/examples/src/main/python/pi.py 10
Although we were able to run a Spark Application within a Docker containers leveraging Apache Mesos there is more work to do. We need to explore containerized Spark Applications that spread across multiple nodes along with providing a mechanism that enables network port mapping.
- Apache Mesos. The Apache Software Foundation, 2015. Web. 27 Jan. 2016. http://mesos.apache.org.
- Apache Spark. The Apache Software Foundation, 2015. Web. 27 Jan. 2016. http://spark.apache.org.
- Benjamin Hindman. "Apache Mesos NYC Meetup", August 20, 2013. Web. 27 Jan 2016. https://speakerdeck.com/benh/apache-mesos-nyc-meetup
- Docker. Docker Inc, 2015. Web. 27 Jan 2016. https://docs.docker.com/.
- Hindman, Konwinski, Zaharia, Ghodsi, D. Joseph, Katz, Shenker, Stoica. "Mesos: A Platform for Fine-Grained Resource Sharing in the Data Center" Web. 27 Jan 2016. https://www.cs.berkeley.edu/~alig/papers/mesos.pdf
- Mesosphere Inc, 2015. Web. 27 Jan 2016. https://mesosphere.com/
- SciPy. SciPy developers, 2015. Web. 28 Jan 2016. http://www.scipy.org/.
- Virtual Box, Oracle Inc, 2015. Web 28 Jan 2016. https://www.virtualbox.org/wiki/Downloads
- Wang Qiang, "Docker Spark Mesos". Web 28 Jan 2016. https://github.com/wangqiang8511/docker-spark-mesos