8000 Release CircuitPython 10.0.0-alpha.6 · adafruit/circuitpython · GitHub
[go: up one dir, main page]
Skip to content

CircuitPython 10.0.0-alpha.6

Pre-release
Pre-release
Compare
Choose a tag to compare
@dhalbert dhalbert released this 17 May 20:35
· 33 commits to main since this release
10.0.0-alpha.6
d88fe10
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

This is CircuitPython 10.0.0-alpha.6, an alpha release for 10.0.0. Further features, changes, and bug fixes will be added before the final release of 10.0.0.

Highlights of this release

  • Fix regression causing errors on ARM processors.

Incompatibility warnings

  • Starting with 10.0.0-alpha.5, the Adafruit Feather S3 4MB Flash 2MB PSRAM board requires TinyUF2 bootloader 0.31.0 or later (update instructions). This version of the bootloader removes the OTA update partition (not used) and doubles the size of the firmware code partition. This change for this particular board is a trial. If all goes well, all 4MB Flash ESP32-S2 and ESP-S3 boards will have this change applied in a later 10.0.0 alpha or beta release.
  • synthio.BlockBiquad has been renamed to synthio.Biquad. The old deprecatedsynthio.Biquad has been removed, as well as synthio.Synthesizer.low_pass_filter, synthio.Synthesizer.high_pass_filter, and synthio.Synthesizer.band_pass_filter. Coefficients from biquad_filter_state have been moved into synthio_biquad (biquad_filter_state is still used for input and output state).
  • The displayio bindings deprecated in 9.x.x have been removed:
    • busdisplay.BusDisplay replaces displayio.Display.
    • fourwire.FourWire replaces displayio.Fourwire.
    • epaperdisplay.EPaperDisplay replaces displayio.EPaperDisplay.
    • i2cdisplaybus.I2CDisplayBus replaces displayio.I2CDisplay.
  • os.uname().sysname and os.uname().nodename now are set to MICROPY_HW_MCU_NAME uniformly across all ports.
  • watchdog.WatchDogTimer.deinit() is removed.
  • _asyncio removed push_head, push_sorted, pop_head. Ensure you are using the latest version of the asyncio Python-level library.
  • sys.print_exception() is removed. Use traceback.print_exception() instead. The exception object returned by sys.exc_info() is now a traceback module compatible object.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try code.circuitpython.org or the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

  • atmel-samd: Microchip SAMD21, SAMx5x
  • cxd56: Sony Spresense
  • espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C2, ESP32-C3, ESP32-C6
  • nordic: Nordic nRF52840, nRF52833
  • raspberrypi: Raspberry Pi RP2040, RP2350
  • stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

  • analog: Analog Devices MAX32690
  • broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
  • espressif: ESP32-P4, ESP32-H2
  • litex: fomu
  • mimxrt10xx: NXP i.MX RT10xxx
  • renode: hardware simulator
  • silabs: Silicon Labs MG24 family
  • stm: ST non-STM32F4 chip families
  • zephyr: multiplatform RTOS: testing with Nordic nRF5340 and nRF54L15, Renesas RA6M5, ST STM32H7

Changes

Fixes and enhancements

  • Fix incorrect number of registers saved as gc roots on ARM processors. #10357. Thanks @eightycc.
  • Fix dirty palette never being cleaned by vector shapes. #10356. Thanks @Neradoc.

Port and board-specific changes

Analog Devices

Broadcom

Espressif

i.MX

Nordic

renode

RP2

SAMx

SiLabs

Spresense

STM

Zephyr

Individual boards

Documentation changes

Build and infrastructure changes

Translation additions and improvements

New boards

Known issues

Thanks

Thank you to all who used, tested, and contributed toward this release, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

Contributors

Neradoc and eightycc
Assets 2
Loading
0