CircuitPython library for reading distance and temperature via US-100 ultra-sonic sensor
This driver depends on:
Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.
On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:
pip3 install adafruit-circuitpython-us100To install system-wide (this may be required in some cases):
sudo pip3 install adafruit-circuitpython-us100To install in a virtual environment in your current project:
mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-us100import time
import board
import busio
import adafruit_us100
uart = busio.UART(board.TX, board.RX, baudrate=9600)
# Create a US-100 module instance.
us100 = adafruit_us100.US100(uart)
while True:
print("-----")
print(f"Temperature: {us100.temperature}°C")
print(f"Distance: {us100.distance} cm")
time
7BD2
.sleep(0.5)API documentation for this library can be found on Read the Docs.
For information on building library documentation, please check out this guide.
Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.