adafruit · brentru · Jun 6, 2019 · Jun 6, 2019 · Jun 6, 2019 · Jun 6, 2019
diff --git a/adafruit_esp32spi/digitalio.py b/adafruit_esp32spi/digitalio.py
@@ -0,0 +1,209 @@
+# The MIT License (MIT)
+#
+# Copyright (c) 2019 Brent Rubell for Adafruit Industries
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+"""
+`digitalio`
+==============================
+DigitalIO for ESP32 over SPI.
+
+* Author(s): Brent Rubell, based on Adafruit_Blinka digitalio implementation
+and bcm283x Pin implementation.
+https://github.com/adafruit/Adafruit_Blinka/blob/master/src/adafruit_blinka/microcontroller/bcm283x/pin.py
+https://github.com/adafruit/Adafruit_Blinka/blob/master/src/digitalio.py
+"""
+from micropython import const
+
+class Pin:
+    """
+    Implementation of CircuitPython API Pin Handling
+    for ESP32SPI.
+
+    :param int esp_pin: Valid ESP32 GPIO Pin, predefined in ESP32_GPIO_PINS.
+    :param ESP_SPIcontrol esp: The ESP object we are using.
+
+    NOTE: This class does not currently implement reading digital pins
+    or the use of internal pull-up resistors.
+    """
+     #pylint: disable=invalid-name
+    IN = const(0x00)
+    OUT = const(0x01)
+    LOW = const(0x00)
+    HIGH = const(0x01)
+    _value = LOW
+    _mode = IN
+    pin_id = None
+
+    ESP32_GPIO_PINS = set([0, 1, 2, 4, 5,
+                           12, 13, 14, 15,
+                           16, 17, 18, 19,
+                           21, 22, 23, 25,
+                           26, 27, 32, 33])
+
+    def __init__(self, esp_pin, esp):
+        if esp_pin in self.ESP32_GPIO_PINS:
+            self.pin_id = esp_pin
+        else:
+            raise AttributeError("Pin %d is not a valid ESP32 GPIO Pin."%esp_pin)
+        self._esp = esp
+
+    def init(self, mode=IN):
+        """Initalizes a pre-defined pin.
+        :param mode: Pin mode (IN, OUT, LOW, HIGH). Defaults to IN.
+        """
+        if mode is not None:
+            if mode == self.IN:
+                self._mode = self.IN
+                self._esp.set_pin_mode(self.pin_id, 0)
+            elif mode == self.OUT:
+                self._mode = self.OUT
+                self._esp.set_pin_mode(self.pin_id, 1)
+            else:
+                raise RuntimeError("Invalid mode defined")
+
+    def value(self, val=None):
+        """Sets ESP32 Pin GPIO output mode.
+        :param val: Pin output level (LOW, HIGH)
+        """
+        if val is not None:
+            if val == self.LOW:
+                self._value = val
+                self._esp.set_digital_write(self.pin_id, 0)
+            elif val == self.HIGH:
+                self._value = val
+                self._esp.set_digital_write(self.pin_id, 1)
+            else:
+                raise RuntimeError("Invalid value for pin")
+        else:
+            raise NotImplementedError("digitalRead not currently implemented in esp32spi")
+
+    def __repr__(self):
+        return str(self.pin_id)
+
+# pylint: disable = too-few-public-methods
+class DriveMode():
+    """DriveMode Enum."""
+    PUSH_PULL = None
+    OPEN_DRAIN = None
+DriveMode.PUSH_PULL = DriveMode()
+DriveMode.OPEN_DRAIN = DriveMode()
+
+
+class Direction():
+    """DriveMode Enum."""
+    INPUT = None
+    OUTPUT = None
+Direction.INPUT = Direction()
+Direction.OUTPUT = Direction()
+
+
+class DigitalInOut():
+    """Implementation of DigitalIO module for ESP32SPI.
+
+    :param ESP_SPIcontrol esp: The ESP object we are using.
+    :param int pin: Valid ESP32 GPIO Pin, predefined in ESP32_GPIO_PINS.
+    """
+    _pin = None
+    #pylint: disable = attribute-defined-outside-init
+    def __init__(self, esp, pin):
+        self._esp = esp
+        self._pin = Pin(pin, self._esp)
+        self.direction = Direction.INPUT
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exception_type, exception_value, traceback):
+        self.deinit()
+
+    def deinit(self):
+        """De-initializes the pin object."""
+        self._pin = None
+
+    def switch_to_output(self, value=False, drive_mode=DriveMode.PUSH_PULL):
+        """Set the drive mode and value and then switch to writing out digital values.
+        :param bool value: Default mode to set upon switching.
+        :param DriveMode drive_mode: Drive mode for the output.
+        """
+        self._direction = Direction.OUTPUT
+        self._drive_mode = drive_mode
+        self.value = value
+
+    def switch_to_input(self, pull=None):
+        """Sets the pull and then switch to read in digital values.
+        :param Pull pull: Pull configuration for the input.
+        """
+        raise NotImplementedError("Digital reads are not currently supported in ESP32SPI.")
+
+    @property
+    def direction(self):
+        """Returns the pin's direction."""
+        return self.__direction
+
+    @direction.setter
+    def direction(self, pin_dir):
+        """Sets the direction of the pin.
+        :param Direction dir: Pin direction (Direction.OUTPUT or Direction.INPUT)
+        """
+        self.__direction = pin_dir
+        if pin_dir is Direction.OUTPUT:
+            self._pin.init(mode=Pin.OUT)
+            self.value = False
+            self.drive_mode = DriveMode.PUSH_PULL
+        elif pin_dir is Direction.INPUT:
+            self._pin.init(mode=Pin.IN)
+        else:
+            raise AttributeError("Not a Direction")
+
+    @property
+    def value(self):
+        """Returns the digital logic level value of the pin."""
+        return self._pin.value() is 1
+
+    @value.setter
+    def value(self, val):
+        """Sets the digital logic level of the pin.
+        :param type value: Pin logic level.
+        :param int value: Pin logic level. 1 is logic high, 0 is logic low.
+        :param bool value: Pin logic level. True is logic high, False is logic low.
+        """
+        if self.direction is Direction.OUTPUT:
+            self._pin.value(1 if val else 0)
+        else:
+            raise AttributeError("Not an output")
+
+    @property
+    def drive_mode(self):
+        """Returns pin drive mode."""
+        if self.direction is Direction.OUTPUT:
+            return self._drive_mode
+        raise AttributeError("Not an output")
+
+    @drive_mode.setter
+    def drive_mode(self, mode):
+        """Sets the pin drive mode.
+        :param DriveMode mode: Defines the drive mode when outputting digital values.
+        Either PUSH_PULL or OPEN_DRAIN
+        """
+        self.__drive_mode = mode
+        if mode is DriveMode.OPEN_DRAIN:
+            raise NotImplementedError('Drive mode %s not implemented in ESP32SPI.'%mode)
+        elif mode is DriveMode.PUSH_PULL:
+            self._pin.init(mode=Pin.OUT)